‘TyThe:centilever truss:shown eihingedieh'D andi! Findithe force Jnveach
member.2. Compute the force in bars FH, GH, and EK in the Fan Fink truss shown
using the methods of sections.
3. The frame shown in figure below is hinged to rigid supports at A and E.
Find the components of the hinge forces at A and E and the forces in
members BC and BD.4. Bodies A and B are joined by a cord parallel to the inclined plane as
shown. Under body A which weighs 200KN, }! = 0.20 while = 0.50 under
body B which weighs 300 KN. Determine the angle at which motion
impends. What is then the tension in the cord?
§ Inthe problem shown, determine the value of P acting to the left that is
Tequired to pull the wedge out from under the 400 KN block.@.As shown in the figure, a square-threaded screw is used in a vise to
exert a pressure of 2 tons. If the screw is double-threaded and has a pitch
of 0.25 in. and 2 mean radius of 1.5 in., determine the torque that must be
applied at B to create this pressure. Assume the coefficient of friction to be
0.16,
F- A boat exerts a pull of 4000 KN on its hawser which is wrapped about a
‘capstan on a dock. If the coefficient of friction is 0.30, how many turns must
the hawser make around the capstan so that the pull at the other end does
not exceed 50 KN.