Professional Documents
Culture Documents
www.tyco-fire.com
Contacts
Care and
3-1/4"
(82 mm) Maintenance
Specific requirements of the NFPA
must be performed, and any impair-
ment must be immediately corrected.
Absence of an escutcheon to cover a
1-7/8" DIA.
(48 mm) FRICTION FIT clearance hole can delay the sprinkler
PAINT CAP OVER operation in a fire situation.
ESCUTCHEON The owner is responsible for the
MOUNTING PLATE inspection, testing, and maintenance of
their fire protection system and devices
in compliance with this document, as
FIGURE 8 well as with the applicable standards
MODEL Z-392 PROTECTIVE PAINT CAP of the NFPA, such as NFPA 25, in addi-
FOR USE WITH STYLE 10, 15, 20, 30, 40, OR 70 tion to the standards of any authority
RECESSED ESCUTCHEON having jurisdiction. Contact the install-
ing contractor or product manufacturer
with any questions.
2-1/2" Automatic sprinkler systems should be
(64 mm) inspected, tested, and maintained by a
qualified Inspection Service in accor-
dance with local requirements and/or
national codes.
1-13/16" DIA.
(46 mm) FRICTION FIT
PAINT CAP OVER
ESCUTCHEON
MOUNTING PLATE
FIGURE 9
MODEL Z-84 PROTECTIVE PAINT CAP
FOR USE WITH STYLE 50 RECESSED ESCUTCHEON
Recessed Protective
Escutcheon Paint Cap
Installation Installation
Installation information for the Style 10, With reference to Figures 8 and 9,
15, 20, 30, 40, 50, and 70 Recessed push the Protective Paint Cap over
Escutcheons is provided in individual the Mounting Plate of the Recessed
pendent and horizontal sidewall sprin- Escutcheon in lieu of the Closure.
kler data sheets, as applicable. These After the ceiling or wall finish is com-
data sheets also include details of plete, remove the Protective Paint Cap
recessed sprinkler installations. and install the Closure.
Note: The Style 10, 15, 20, 30, 40, 50, The Protective Paint Cap may be dis-
and 70 Recessed Escutcheons must carded as a plastic commodity or Low
only be used with the sprinklers for Density Polyethylene Recycling Cate-
which they have been specifically lab- gory 4, in conformance with local reg-
oratory approved by UL, C-UL, ULC, ulations. Alternatively, the Protective
or FM. Paint Cap may be reused.
Note: The sprinkler cannot operate
properly with the Protective Paint Cap
in place.
TFP770
Page 4 of 4
Limited Style 40
3/4 in. NPT (20 mm), 3/4 in. (19,1 mm)
Style 40
3/4 in. NPT (20 mm), 3/4 in. (19,1 mm)
Warranty total adjustment
Brass Plated ���������������������������������� 56-700-2-010
total adjustment
Signal White (RAL9003) ����������������56-700-4-010
For warranty terms and conditions, visit Pure White (RAL9010)* ������������������56-700-3-010 Plain Unpolished ���������������������������� 56-700-1-010
Signal White (RAL9003) ����������������56-700-4-010 Grey Aluminum (RAL9007) ������������ 56-700-7-010
www.tyco-fire.com. Jet Black (RAL9005) ����������������������56-700-6-010
Chrome Plated . . . . . . . . . . . . . . . 56-700-9-010 Style 50
Ordering Style 50
1/2 in. NPT (15 mm), 3/8 in. (9,5 mm)
total adjustment
Procedure 1/2 in. NPT (15 mm), 3/8 in. (9,5 mm)
total adjustment Signal White (RAL9003) ���������������� 56-711-0-010
Plain Unpolished ����������������������������� 56-711-1-010
Contact your local distributor for avail- Brass Plated . . . . . . . . . . . . . . . . . . 56-711-2-010
ability. When placing an order, indicate Pure White (RAL9010)* ������������������ 56-711-3-010 Style 70
the full product name and Part Number Signal White (RAL9003) ���������������� 56-711-4-010 For use with TY-B and TY-FRB 10 mm
(P/N).
Chrome Plated . . . . . . . . . . . . . . . 56-711-9-010 orifice sprinklers only, refer to data
Style 70 sheet TFP670
Protective Paint Cap For use with TY-B and TY-FRB 10 mm 3/8 in. NPT (10 mm), 3/4 in. (9,1 mm)
Specify: Model (specify) Protective orifice sprinklers only. Refer to data total adjustment
Paint Cap, P/N (specify): sheet TFP670
Model Z-84 . . . . . . . . . . . . . . . . . . . 56-711-1-084 ANZ only:
Model Z-392 . . . . . . . . . . . . . . . . . 92-000-0-412 3/8 in. NPT (10 mm), 3/4 in. (9,1 mm) Plain Unpolished �������������������������������ECPL2PS10
total adjustment
Recessed Escutcheon EMEA only:
Specify: Style (specify) Recessed ANZ only:
Plain Unpolished ����������������������������ESCSTDSS10
Escutcheon, (specify Carbon Steel Signal White (RAL9003) ������������������ECPL2PW10
or Stainless Steel), (specify) finish, Chrome Plated �������������������������������� ECPL2PC10
P/N (specify): Brass . . . . . . . . . . . . . . . . . . . . . . . . . ECPL2PB10
Jet Black (RAL9005) �����������������������ECPL2PBL10
Carbon Steel EMEA only:
Style 10 Pure White (RAL9010)* ������������������ESCSTDRA10
1/2 in. NPT (15 mm), 3/4 in. (19,1 mm) Signal White (RAL9003) �������������� ESCSTDWH10
total adjustment Chrome Plated . . . . . . . . . . . . . . . ESCSTDCH10
Brass . . . . . . . . . . . . . . . . . . . . . . . ESCSTDBR10
Brass Plated . . . . . . . . . . . . . . . . . 56-701-2-010 Jet Black (RAL9005) ���������������������� ESCSTDJB10
Pure White (RAL9010)* ������������������ 56-701-3-010
Signal White (RAL9003) ���������������� 56-701-4-010 * Eastern Hemisphere sales only
Jet Black (RAL9005) ���������������������� 56-701-6-010 Stainless Steel
Chrome Plated . . . . . . . . . . . . . . . 56-701-9-010
Style 10
Style 15 1/2 in. NPT (15 mm), 3/4 in. (19,1 mm)
1/2 in. NPT (15 mm), 5/8 in. (15,9 mm) total adjustment
total adjustment
Signal White (RAL9003) ���������������� 56-701-0-010
Brass Plated . . . . . . . . . . . . . . . . . 56-715-2-010 Plain Unpolished �����������������������������56-701-1-010
Pure White (RAL9010)* ������������������ 56-715-3-010 Grey Aluminum (RAL9007) �������������56-701-7-010
Signal White (RAL9003) ���������������� 56-715-4-010
Jet Black (RAL9005) ���������������������� 56-715-6-010 Style 15
Chrome plated . . . . . . . . . . . . . . . 56-715-9-010 1/2 in. NPT (15 mm), 5/8 in. (15,9 mm)
total adjustment
Style 20
1/2 in. NPT (15 mm), 1/2 in. (12,7 mm) Signal White (RAL9003) ���������������� 56-715-0-010
total adjustment Style 20
Brass Plated . . . . . . . . . . . . . . . . . 56-705-2-010 1/2 in. NPT (15 mm), 1/2 in. (12,7 mm)
Pure White (RAL9010)* ������������������56-705-3-010 total adjustment
Signal White (RAL9003) ����������������56-705-4-010
Jet Black (RAL9005) ����������������������56-705-6-010 Signal White (RAL9003) ����������������56-705-0-010
Chrome Plated . . . . . . . . . . . . . . . 56-705-9-010 Plain Unpolished ��������������������������� 56-705-1-010
Style 30 Style 30
3/4 in. NPT (20 mm), 1/2 in. (12,7 mm) 3/4 in. NPT (20 mm), 1/2 in. (12,7 mm)
total adjustment total adjustment
Brass Plated . . . . . . . . . . . . . . . . . 56-705-2-011 Signal White (RAL9003) ���������������� 56-705-0-011
Pure White (RAL9010)* ������������������ 56-705-3-011 Plain Unpolished �����������������������������56-705-1-011
Signal White (RAL9003) ���������������� 56-705-4-011
Jet Black (RAL9005) ���������������������� 56-705-6-011
Chrome Plated . . . . . . . . . . . . . . . 56-705-9-011
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association