Professional Documents
Culture Documents
Analysis:
MOXA and Honeywell Technology team confirmed that based on the speed of the IOLINK application
the installation should guarantee a minimal signal dB loss. It’s recommended that the fiber signal dB
loss is between 3dB and 15dB for both Series C and PMIO IOLINK application.
***Note:This does not apply when using Multi mode Moxa FOE ICF-1150I-M-ST-T (HPS-C)
Resolution:
If your installation is using a short fiber or if you’re experiencing IOLINK errors, we recommend
performing fiber dB loss measurement. If dB loss is less then 3dB, an attenuator of 3dB or more
should be installed on your fiber.
Series C I/O User’s Guide will be updated to add the minimum dB loss requirement for fiber optic link.