Professional Documents
Culture Documents
PCMtuner
MODULE 53 - Infineon Tricore BSL
Description and example operation 1
This module is for qualified users only and requires access to the ECU
pcb and in some cases the soldering of additional components. The work
is performed in bench mode (BUT ECU disassembling is required).
The module supports many ECU's with the TC1724, TC1728, TC1736,
TC1738, TC1762, TC1766, TC1767, TC1782, TC1792, TC1793, TC1796,
TC1797 and TC1798 microcontrollers of Bosch, Siemens / Continental and
Delphi ECUs.
The password can be read from SIM2K-24x, Ford EMS22XX, Ford
SID20X, Bosch, Bosch GPT ECUs.
The opens to possibilities to MANY ecus not supported by other modules.
Compatibility
TC1762/TC1766 MICRO (1504KB)
TC1762/TC1766 EEPROM (32KB)
TC1792/TC1796 MICRO (2048KB)
TC1796 MICRO+EXT (4096KB/6144KB)
TC1796 EXT (2048KB/4096KB)
TC1792 EEPROM (64KB)
TC1796 EEPROM (128KB)
TC1736 MICRO (1024KB)
TC1736 EEPROM (32KB)
TC1738/TC1767 MICRO (2048KB)
TC1738/TC1767 EEPROM (64KB)
TC1797 MICRO (4096KB)
TC1797 EEPROM (64KB)
TC1797 MICRO+EXT (6144KB/8192KB)
TC1797 EXT (2048KB/4096KB)
TC1724/TC1728 MICRO (1536KB)
TC1724/TC1728 EEPROM (64KB)
TC1782/TC1784 MICRO (2560KB)
TC1782/TC1784 EEPROM (128KB)
TC1791/TC1793 MICRO (4096KB)
TC1791/TC1793 EEPROM (192KB)
TC1791/TC1793 MICRO+EXT (6144KB/8192KB)
TC1791/TC1793 EXT (2048KB/4096KB)
Delphi MT86 EEPROM (16KB)
Delphi CRD3.1 EEPROM (32KB)
Tested ECUs
Bosch
VAG MED17.1 TC1796
VAG MED17.1.1 TC1796
VAG MED17.1.6 TC1797
Ford MED17.2 TC1767 TPROT7
Ford MED17.2 TC1767 GPT
BMW MEVD17.2.4 TC1797 GPT
BMW MEVD17.2.9 TC1797 GPT
VAG MED17.5 TC1766
VAG MED17.5.5 TC1766
VAG MED17.5.5 TC1766 GPT
VAG MED17.5.5 TC1767 GPT
VAG MED17.5.21 TC1782 GPT
VAG ME17.5.26 TC1724 GPT
MB MED17.7.1 TC1797 TPROT7
MB MED17.7.2 TC1797 GPT
PSA MED17.4.4
China ME17.8.8 TC1728
K/H MEDG17.9.8 TC1767
VAZ ME17.9.7 TC1762
K/H ME17.9.11 TC1762
K/H ME17.9.13 TC1762
UAZ ME17.9.71 TC1724
Siemens / Continental
K/H SIM2K-241 TC1767
Ford SID208/SID209 TC1797
Ford EMS2204/EMS2211 TC1738
JLR SID208
Delphi
GM MT-60 TC1766
China MT-80 TC1762
GM MT-80 TC1762
K/H MT-86 TC1766
MB CRD 3.10 TC1797
CRD3/CRD3P
Working Example.
For our example we are going to Read and write both Flash
memory and EEPROM from a Delphi CRD3.10 in this case,
the ecu is from a 2012 Mercedes C250 blue efficiency
model, a car not on our current module list.
Step 1.
We need to dismantle the ECU in order to access the PCB to
enable us to place the ecu in boot mode so that we can read/write.
Now we must prepare the PCB for boot mode. Below are
just some of the Schematics available via online resources
on how to place this ecu into BSL or boot mode. Some
some will show connections for resistors to be soldered.
These type are usually our last resort if we cannot use our
boot and cnf cables.
Others may show the Labels L and H
and others BOOT and CNF1
Step 2.
Power on our PCMtuner hardware, open PCMflash, and
select module 53 TC1797 Micro (4096kb)
Our Micro is where our flash memory containing maps etc is located.
click save...
Now we will read our eeprom. In the case of this
particular ECU its is an external Ic, so we select the
option via MODULE 53>>external eeprom>>Delphi
CRD3.1 eeprom
So we click yes......
For our ECU we must select 'other (no crc checks) in the first
drop down box.
Password is Auto (as not used on this ecu)
'use write optimizations' is unchecked. This means the full
flash file is written. If checked, only changes in the file will be
written to Flash - We then click OK
Sit back, have a beer and wait on your latest masterpiece
being written to the ECU
If all goes to plan....Successful write!!!
by PCMtuner Marty
www.iecutool.com
www.tuner-box.com