Professional Documents
Culture Documents
Six-Days FDP On DOE and Optimization-PRINT-Send
Six-Days FDP On DOE and Optimization-PRINT-Send
ON
CONVENER
Prof. M. Cheralathan
Head of the Department
CO-CONVENER
Dr. U. Mohammed Iqbal
Head – Manufacturing Division
COORDINATORS
Prof. S. Prabhu
Dr. S. Murali
Organized by
https://www.srmist.edu.in/engineering/department-of-mechanical-engineering
ABOUT DEPARTMENT
.
The Department of Mechanical Engineering is one of the pioneering departments of SRMIST. The department is
functionally divided into three broad areas of specialization: (i) Design (ii) Manufacturing and (iii) Thermal. B.Tech
Mechanical Engineering program at Kattankulathur campus is accredited by Engineering Accreditation Commission
(EAC) of ABET, USA, (www.abet.org). The department also offers M.Tech, and Doctoral programs in various
specializations. The present faculty strength is 115. Around 1000 research papers have been published in peer reviewed
high impact factor international journals and 1000 papers have been presented in national and international conferences.
More than 30 patents have been filed in national and international levels. The following conferences (recent) was
conducted by the Department of Mechanical Engineering, Kattankulathur: 2nd International Conference on Advances in
Mechanical Engineering (ICAME 2018), 3rd International Conference on Advances in Mechanical Engineering (ICAME
2020), First virtual International Conference on Advances in Renewable and Sustainable Energy Systems (ICARSES
2020), International Conference on Advances in Thermal Engineering and Application (ICATEA 2021), International
Conference on Recent Advances in Manufacturing Engineering Research (ICRAMER 2021), International Conference
on Advances in Mechanical Engineering Design (ICAMED 2021).
Vision: To impart knowledge to our students in an ambience of Humanity, Wisdom, Intellect, Creativity of Innovation,
in order to nurture them culturally and Ethically rich professionals with bright future.
Mission #1. To impart quality education to produce mechanical engineers and enhance their skills to become world
renowned professionals.
Mission #2. To establish Centers of Research Excellence to inculcate research acumen in faculty and students on the
areas like; machining, biomechanics, bio-fuels, composites, and energy.
Mission #3. To provide state-of-the-art education and training programs to the faculty and student fellowship.
ABOUT THE FDP
The statistical principles underlying design of experiments were largely developed by R. A. Fisher during the 1920s and
1930s. Over the past 15 years, there has been a tremendous increase in the application of experimental design techniques
in almost all types of industries. The work of G.Taguchi on robust design for variation reduction had revolutionary impact
on Japanese industry. Today industries all over the world use design of experiments for problem solving and robust
product development. The academic community use design of experiments extensively to prove or validate their research
findings. Design of Experiments is the most powerful statistical tool that will provide the most significant information
possible with the least amount of work. DOE has gained common acceptance among the researchers of various
disciplines. Its cost effectiveness, greater speed and its ability to reveal design limitations not apparent with the traditional
experimental methods make DOE approach more vital in research field. The objective of this course is to provide faculty
members and students a theoretical and practical knowledge on the Design of Experiments and the skill required to
analyze engineering problems with a commercially available software package. This course is designed in such a way
that, in addition to the fundamental topics, advance topics have been included in line with the current research scenario
which will be covered through expert lectures and hands on training. Also this FDP is devoted to addressing the need to
enhance the knowledge about the Optimization Techniques in Engineering Applications is being conducted at SRM
Institute of Science and Technology, Chennai.
Program Outcome
Program Outcome 4: Conduct investigation of complex problems: Use research-based knowledge and research methods
including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid
conclusions.
REGISTRATION DETAILS BANK DETAILS
Registration Fee: INR 200/- Account Name: ISHRAE STUDENT CHAPTER - SRM UNIV
Last date for Registration: 15-10-2021 Account Number: 117001000635544
Intimation of Registration Confirmation: 16-10-2021 Name of the Bank: City Union Bank, Tambaram
E-Certificate will be issued for all registered participants IFSC Code: CIUB0000117
FDP Date: 18th -23rd October 2021
Associated with
This six days FDP on Recent Trends in Design of Experiments (DOE) and Optimization Techniques with Hands
on Training is organized by the Department of Mechanical Engineering, sponsored by SRM Institute of Science and
Technology, Kattankulathur. In association with Mechanical Engineering Association (MEA), The Institute of Engineers
(India)-Kattankulathur Local Centre, ASME SRM Student Section, and ISHRAE – SRMIST Student Chapter.
Chief Patrons
Shri. T. R. Paarivendhar, Chancellor, SRMIST
Shri. Ravi Pachamoothoo, Pro-Chancellor (Administration), SRMIST
Shri. P. Sathyanarayanan, Pro-Chancellor (Academics), SRMIST
Shri. R. Shivakumar, Vice President, SRMIST
Prof. Dr. C. Muthamizhchelvan, Vice Chancellor, SRMIST
Prof. Dr. S. Ponnusamy, Registrar, SRMIST
Advisory Committee
Prof. Dr. T. V. Gopal, Dean CET, SRMIST
Prof. Dr. D. Kingsly Jeba Singh, Chairperson, School of Mechanical Engineering, SRMIST
[prabhus@srmist.edu.in & 9841245755] Mrs. Deborah Sernate Stephen Meeting Hosted On: Google Meet
Introduction Manufacturing
Day 1
Optimization Algorithm
Speakers: Dr. Sudhansu Sekhar,
IIT Patna Speaker: Dr. Vivek D. Kalyankar, NIT Surat.
(22-OCT)
Topic: Particle Swarm Optimization Topic: Neural Networks and Deep Learning
Day 5
Speaker: Dr. Karali Patra, IIT Patna Speaker: Dr. N. Arunachalam, IIT Madras