Professional Documents
Culture Documents
: 2
Course Title: Sessional on mechanics of Solids II Roll No.:
1. Why Tensile or Compressive strength of Timber along the grain is higher than the
perpendicular to the grain?
2. Give four example of brittle material.
3. Draw different failure pattern of Timber specimen.
4. Give three example of structural member subjected to Torsion.
5. States the Hooks Law. Define spring constant.
6. Write the Theoretical equation used to determine total shear stress of spring.
1. Write the ASTM standard size of Timber specimen for Compression test of
Timber.
2. Is Timber is ductile or brittle material?
3. ----- % offset method is used to determine the yield strength of Timber on which
load is applied parallel to grain.
4. Give three example of structural member subjected to Shear stress.
5. Define helical spring.
6. Write the Theoretical equation used to determine stiffness of spring.
1. Why Tensile or Compressive strength of Timber along the grain is higher than the
perpendicular to the grain?
2. ----- % offset method is used to determine the yield strength of Timber on which
load is applied parallel to grain.
3. Give four example of brittle material.
4. Define Impact test? Give two example of Impact loading.
5. Write down the theoretical equation for determining Impact value.
6. Why Izod cantilever test is named so?