Self-adjustment of damper motor end positions
\
te
‘Self-adjustment of damper motor end positions. Eleotionie climate
control (ECC), Manual climate control (MCC), Standard (STD)
Note! Sel-adjustment must be carried out it the contro! module or
damper motor is replaced or the damper motor or its linkage has been
removed. The indication LED on the climate contro! module panet will
flash during adjustment.
int: During sa-ajustment the control modu dampor motors to the
limit positions. The control module than stores the value returned fram the position
sensor for the damper motor. The control modula is then abloto operate tha motor
‘botwoon the limit postions during normal operation.
Start the engine the generator charges)
‘Activate se-adjustment. The sell adjustment takes thirty seconds,
the same
To run tho self-adjustmont again, switch off the
0 seconds and start the engine again.
ing whan the ssi adjustment is complete