Professional Documents
Culture Documents
DDCouplings
®
Product Information
Art.No XB02 Version 1710
Table of Content
1" (Ø 56 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 4 - 8
2" (Ø 70 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 9 - 13
2½" (Ø 105 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 14 - 17
3" (Ø 119 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 18 - 21
4" (Ø 164 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 22 - 24
No part of this brochure may be produced in any form or by means without permission in writing from the publisher.
6" (Ø 238 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 25 - 26
8" (Ø 272 mm) Tank Unit (Adapter) and Hose Unit (Coupler) 27 - 28
Note: Mann Tek reserves the right to make design modifications without previous written notice.
DDCouplings
®
2
Dry Disconnect Couplings
1" ( Ø 56 mm) DDCouplings
Maximum Minimum
Material Test Pressure
Working Pressure Burst Pressure
Aluminium 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160 psi
Brass / Gunmetal 16 bar / 232 psi 24 bar / 348 psi 80 bar / 1160 psi
Stainless Steel 25 bar / 363 psi 37,5 bar / 544 psi 125 bar / 1813 psi
Titan 25 bar / 363 psi 37,5 bar / 544 psi 125 bar / 1813 psi
Hastelloy 25 bar / 363 psi 37,5 bar / 544 psi 125 bar / 1813 psi
PEEK 6 bar / 87 psi 9 bar / 131 psi 30 bar / 435 psi
Connections Seals
¾", 1" and 1¼" in BSP, NPT or metrical thread, Standard seals in FPM (Viton®) - alternatively
or flanged inlet. EPDM, FKM (Chemraz®, Kalrez®), NBR/HBNR.
Other materials on request.
Applications
For industrial process plant, road and rail tankers, High Flow Rates / Low Pressure Drop
IBC containers, pharmaceutical and petrochemical Allows maximum product transfer with minimal losses
industries, diesel locomotive refuelling etc.
Recommended for all types of mini bulk liquid Recommended Maximum Flow Rates
product transfer, including container and drum 200 litres / minute (fuel)
filling, or on any application where spillage needs
to be minimized. Selectivity
- avoid mixing products
Media To avoid product contamination caused by connecting
Petroleum products: gasoline, diesel, oil etc. a hose unit to the wrong tank unit, selective versions
Chemical products: e. g. ethylene oxide, of the hose and tank units are available. Each unit has
propylene oxide, acrylonitrile, butadiene, a number of selective positions, designated by a
ammonia, vinyl chloride, toluene, xylene, coded part number according to the coupling size –
sulphuric acid, phenol etc. specify when placing order. See page 32 ff.
Gas: vapor recovery/balance systems for
various media. Interchangeability
Compatible with couplings of other manufacturers.
Material of Body
Aluminium, brass, stainless steel, Hastelloy Hose Unit with Integrated Swivel
and PEEK. Others on request. All hose units are supplied with an integrated swivel.
4
1" (Ø 56 mm) DDCouplings
1)
F = Female thread, BSP = EN ISO 228, NPT = ANSI B1.20.1
2)
Material: Al = Aluminium, Br = Brass, SS = Stainless Steel
3)
Standard seal FPM/FKM. Alternative materials, e. g. EPDM, Chemraz®, Kalrez®, NBR or HNBR on request.