Professional Documents
Culture Documents
RAPTOR 55-2R is an electrohydraulic rig for long hole drilling, its hydraulic boom has automatic
parallelism, equipped with two rotary actuators allow drilling very close to both walls of the section
of the mine.
Its Feed 8000 series, with 2 Stinger provides the best stability to reduce the deviation.
Equipped with Montabert HC 95 drifter with 24 kW and Back Hammering - rods extractor, the most
modern on the market. Includes magazine and hydraulic clamp.
Chassis for heavy duty, articulated 4WD, self propelled with diesel engine, Poclain hydrostatic
transmission, electrohydraulic system for drilling.
Aplications:
- Sub level and benching.
- Block caving
- VCR and cable bolting application.
www.resemin.com
Raptor 55-2R Technical specifications
SPECIFICATIONS
Cabina Presurizada A/C
FOPS / ROPS
Caterpillar
Feed 8000 of 5' C4.4 ACERT, Tier 3
Boom 5APR-2R
Cable Reel
Montabert HC 95
DRIFTER CARRIER
Ÿ Model Montabert HC 95 (095LQa) Ÿ Model C66.3
Ÿ Percussion power 24 kW Ÿ Diesel engine Caterpillar C4.4 ACERT, Tier 3
Ÿ Percussion pressure 180 bar Ÿ Power 106 kW @ 2200 rpm
Ÿ Frequency 57 Hz Ÿ Exhaust catalyster Standard
Ÿ Rotation Speed 0 - 220 rpm Ÿ Transmission Hydrodynamics
Ÿ Rotation torque 955 Nm Ÿ Powershift gearbox Dana, T12000
Ÿ Hole diameter 51 - 89 mm Ÿ Differential axle Dana, Series 112
Ÿ Rhymed diameter 75 - 127 mm Ÿ Rear axle oscillating ± 8°
Ÿ Air consumption (flushing) 8000 l/min (7 - 10 bar) Ÿ Tramming speed:
Ÿ Air consumption (lubrication) 300 l/min (a 3 bar) - Horizontal max. 15 km/h
Ÿ Oil consumption (lubrication) 0.8 cc/min - Positive ramp 15% max. 4.5 km/h
Ÿ Water consumption 60 - 120 l/min (8 - 20 bar) Ÿ Positioning pump Parker, PGP315
Ÿ Shank Adapter R38, T38, T45 - male Ÿ Service brakes Wet discs, POSI STOP
Ÿ Weight 181 kg Ÿ Emergency and parking SAHR (Spring Applied
brakes Hydraulic Release)
Ÿ Steering (articulated carrier) ±40°
FEED Ÿ Tyres 12.00 x R20
Ÿ Model RE 8000 series Ÿ Hydraulic jacks 2 extendable front,
Ÿ Drifteradvance Hydraulic motor and chai 2 rear
Ÿ Feed extension 715 mm Ÿ A/C Enclosed Cabin FOPS / ROPS
Ÿ Hydraulic clamp BULL 120 Ÿ Fuel tank 20.6 gal / 78 l
Ÿ Stinger cylinder 2 units to stabilize when Ÿ Battery 2x12 V, 90 Ah
drilling Ÿ Electric system 24 VDC
Ÿ Digital inclinometer AMLH SYSTEM - Angle Ÿ Tramming lights 8X, Halogen 65W HD, 24 V
Measurement Long Hole & Ÿ Centralized grease system SKF
Software Ÿ Drilling lubrication system SKF
Ÿ Magazine T38 / 14 + 1 rods Ÿ Automatic fire suppression
T45 / 12 + 1 rods system ANSUL, 4 nozzles
Ÿ Fire extinguisher 1x6kg, Type ABC - manual
Ÿ High pressure washing
Feed Type Overall length Rod length system Manual
(mm) (L) (mm) (R) Ÿ Reel grease gun Manual
Feed 8000 of 4' 2826 1219
Feed 8000 of 5' 3126 1524
Feed 8000 of 6' 3426 1829 BOOM
Ÿ Model Boom 5APR-2R
L
Ÿ Boom extension 1200 mm
R
Ÿ Lift angle +60° / -50°
Ÿ Swing angle ±30°
Ÿ Rotation 360°
Ÿ Hydraulic cylinders Parker
www.resemin.com
Raptor 55-2R Technical specifications
DIGITAL INCLINOMETER
The digital inclinometer controller indicates the measurement
of the inclination, rotation and parellelism angles of the feed.
The angles are displayed on the screen with a friendly
interface, it also has a menu that shows the status of both
sensors and any possible errors.
www.resemin.com
Raptor 55-2R Technical specifications
DIMENSIONS
Dimensions in mm
TURNING RADIUS
Dimensions in mm
www.resemin.com
Raptor 55-2R Technical specifications
COVERAGE
Dimensions in mm
4000
4000
360° 360°
190
190
RESEMIN Specifications and equipmet are subject to change without further notice.
360° 360°
Dimensions in mm
©Copyright 2020
Rev. 060720
www.resemin.com