Professional Documents
Culture Documents
PRODUCT CMR 1AL CMR 1ML CMR 5AL CMR 5ML CMR 5AP CMR 5MP CMR 5AG CMR 5MG
lMains POWER ON
lOC OVER CURRENT
lUC UNDER CURRENT
CURRENT MONITORING RELAY SERIES CMR
Test Function NO YES
Setting Accuracy + / - 5% MODEL NO. TRIP CHAR. CURRENT APPLICATION
Repeat Accuracy + / - 2%
CMR 1AL Denite 0.2 - 2 Amp Current/earth
Hysterisis + / - 5%
Fault
Relay Output : CMR 1ML Denite Protection
96
92
56
68
lLED indication of all faults. 2 7
lEasy to install.
Functional Description
8
lUnder Load Protection: 1 2 3 4 5 6
Under Load protection is provided by undercurrent trip. When
CMR-1AL/CMR-1ML/CMR-5AL/CMR-5ML 37
current fall below the set level the under load fault is generated.
It is suitable for small pumps to avoid dry running, cavitation,
etc.
lOverload Protection :
Relay trips if the current exceeds set value of the current for 4 Connection Diagram
duration of trip time during running time. Relay trips if current 1
exceeds set value for duration of addition of start time and trip
5
time of startup. 2 CT IN Aux. Supply
lTest Function :
This function can be used to check the trip time accuracy of the
relay. For test sequence press and hold the TEST switch. 3 6 1 2 3 4 5 6
Relay trips after completion of set values of start time and trip
time. 7
7 8 9 10 11 12
8
Reset: NC NO
lAuto
In case of Auto reset mode, relay resets after set time. Test/Reset
CMR-5AP/CMR-5MP/CMR-5AG/CMR-5MG
lManual COM
For all trips relay could be reset immediately by manually
pressing and holding reset switch For 2 seconds. 1. Power on LED indication
2. Over current trip indication (Contacts in Power OFF Condition)
Trip Characteristics 3. Under current trip indication
Power On
4. Potentiometer for start time setting
5. Potentiometer for over current setting
6. Potentiometer for under current setting
7. Potentiometer for trip time setting
Over Load }Hysterisis 8. Reset Switch
Current
CAUTION:
Under 1. Always follow instruction stated in this product leaet.
}Hysterisis
Load 2. Before installation, check to ensure that specication are in
agreement with the intended application.
Plot No. 20-21, Sector 59 Phase- ||,
3. Installation to be done by skilled electrician. Faridabad, Haryana, Pin - 121004
Relay ta tb ta tb
4. Suitable dampers should be used in the event of excessive Phone: 091-129-4700400
ta - Trip Time tb - Reset Time vibrations. E-mail: info@mrmprocom.com