Professional Documents
Culture Documents
The Procedure For Disassembling A System Unit
The Procedure For Disassembling A System Unit
Step 2 – Now line up the power supply at the top back end of the cabinet and screw it.
Step 3 – The power connector for motherboard, power supply are to be connected.
Step 4 – Mount the memory module on the motherboard by aligning the ram to its socket.
Step 6 – Install the video card to the PCIE expansion slot in the motherboard, and tighten
with the screw
Step 7 – Place the hard disk drive on the disk tray, and tighten with a screw.
Step 8 – Put the SATA power connector to the dark disk drive.
Step 9 – Connect the SATA in the dark disk drive, then to the motherboard.
Step 10 – Cover the tower by replacing it and pressing towards front side and screw it.