Professional Documents
Culture Documents
Applications & Key Casting system cured product is suitable for outdoor application.
Properties
Product Specifications
Reference Value
Properties Units
Standard HSC 1329 HSC 5100
Appearance Visual HTP-1 Grey Paste Amber Liquid
Specific Gravity gm/cm³ ASTM D891 1.85 ± 0.03 1.10 ± 0.02
10000-20000 @
Viscosity mPas ASTM D2196 100-300 @ 22˚C
65˚C
Cured Properties
Tensile Strength MPa ASTM D638 64.81
Linear Shrinkage in/in ASTM D2566 0.0094
Tensile Elongation % ASTM D638 3.4
Shore Hardness Shore D HTP-22 90D
Density gm/cm³ ASTM D792 1.70
HDT °C ASTM D648 100
Mixing Mix ratio must be within ±2% of the stated amount and thorough mixing is
required to avoid degraded final properties.
Curing Other cure schedules may give satisfactory results; however, these should be
determined by the customer for their given circumstances
Storage These products may trigger allergic responses in some individuals. Prevent
Conditions contact with skin, wash with plenty of soap and water immediately if contact
occurs. Do not breathe vapours, provide good ventilation and exercise good
housekeeping at work area. Read the Material Safety Data Sheet.
If a filled resin, setting may occur during transportation or storage. Fillers
must be remixed before use.
If filled resin, settling may occur during transportation or storage. Filler must
be remixed before use.
Products has 12- month of shelf life.