Professional Documents
Culture Documents
MACHINERY AND
EQUIPMENT
4-WHEEL DRIVE TRACTOR
(KUBOTA L3608)
2 WHEEL DRIVE TRACTOR OR HAND
TRACTOR
Figure 1
FIGURE 1
Engine
Stand assembly
Cage wheel
HAND TRACTOR (DETAILED PARTS)
OPERATING THE TRACTOR
PRE-OPERATION CHECK
DAILY CHECK
Walk around inspection
Check engine oil level
Check transmission oil level
Check coolant
Check water separator
Check grill and radiator screen
Check air cleaner evacuator valve (dusty place)
Check brake and clutch pedal
Check indicators, gauge and meters
Check lights
Check seatbelt and ROPS
Check movable parts
Refuel
OPERATING THE ENGINE
1. Make sure the parking brake is set
2. Make sure the fuel cock is open position
3. Place the shift levers in “Neutral” position
4. Place the PTO gear shift lever in “Neutral” position
5. Place the hydraulic control lever in “Lowest” position
6. Set about the throttle lever to about ½ way
7. Insert the key into the switch and turn it “ON”
8. Fully depress the clutch pedal
9. Turn the key “START” position release when the engine
starts
10. Turn the key to “PRE-HEAT” and keep it there for 10
seconds
11. Turn the key to the start position and the engine should
start.
STOPPING THE ENGINE
1. After slowing the engine to idle, turn the key to
“OFF”
2. Remove the key
STARTING