You are on page 1of 13

DELHI PUBLIC SCHOOL BANGLORE

EAST
CHEMISTRY INVESTIGATORY
PROJECT
❖To study the quantity of casein in different
samples of milk.

Name: SHASWAT SANJEEV MISHRA (ROLL NO. 22)

Class: XI-O
Index:

1. Certificate

2. Acknowledgement

3. Objective

4. Introduction

5. Materials and Equipment

6. Theory

7. Experimental Procedure

8. Result

9. Conclusion

10.Precautions

11.Bibliography
Certificate:

This is to certify that Mr./ Ms.


_________________________________ of class 11,
with Roll Number ___________________ of Delhi Public
School, Bangalore East has completed his/her project in
the subject of ___________________________ for the
class 11 practical examination of the Central Board of
Secondary Education for the academic year 2022-2023
under my supervision. He has taken great care and
shown utmost sincerity in the completion of the project. I
further certify that this project is up to my expectation and
is as per CBSE requirements.
________________
Manila Carvalho Principal

___________________
Internal Examiner

_______________________
External Examiner
Acknowledgement:

I would like to express my sincere gratitude to


my chemistry teacher Mrs. Bhavitha and lab
assistant Ms. Bhavani for their vital support,
guidance and encouragement without which
this project would not have come forth.

I would also like to thank Ms. Manila Carvalho,


our esteemed principal, for her continued
support and to provide the facilities required to
execute this project.

Last, but not least, I would like to thank my


parents for their undivided support and interest
which always inspires me.
Objective:

➢ To study the quantity of casein in different


samples of milk.
Introduction:

Milk is a complete diet as it contains minerals, vitamins,


proteins, carbohydrates, fats, and water. Average
composition of milk from different sources is given below:

Casein is the phosphoproteins commonly found in


mammalian milk, making up 80% of the proteins in cow
milk. Casein is used in making cheese, a food additive
etc. The most common form of casein is sodium
caseinate.
Casein has isoelectric pH of about 4.7 and can easily
be separated around this isoelectric ph. It readily
dissolves in dilute acids and alkalis. In milk, casein
undergoes phase separation to form colloidal casein
micelles, a type of secreted biomolecular condensate.
These micelles have negative charge and on adding
acid to milk the negative charges are neutralized.
Materials and Equipment:

1. Beakers (250ml)

2. Filter paper

3. Glass Rod

4. Weight Box

5. Filtration Flask

6. Buchner Funnel

7. Test Tubes

8. Porcelain Dish

9. Different samples of Milk

10. 1% acetic acid solution

11. Ammonium sulphate solution


Theory:
Natural milk is an opaque white fluid secreted by the
mammary glands of a female mammal. The main
constituent of natural milk are protein, carbohydrates,
mineral, vitamins, fat and water and is a complete diet.
Fresh milk is sweetish in taste. However, when it is kept for
a long time at a temperature of 5° C it becomes sour
because of the bacteria present in air. These bacteria
convert lactose of milk into lactic acid which is sour in
taste.
In acidic condition, casein of milk starts separating out as a
precipitate. When the acidity of the milk is sufficient and
the temperature is around 36° C, it forms a semi solid
mass called curd.

Structure of Casein
Experimental Procedure:

a. Take a clean dry beaker, put into it 20ml of


cow's milk and add 20ml of saturated
ammonium sulphate slowly into the beaker
while stirring with a glass rod. Fat along with
casein will precipitate out.

b. Filter solution and transfer the precipitate in


another beaker. Add 30ml of water to the
precipitates.
c. Only casein dissolves in water forming milky
solution, leaving the fat undissolved.
d. Heat the milky solution to about 40°c and add
1% acetic acid solution dropwise, when casein
gets precipitated.

e. Filter the precipitate, wash with water and let it


dry. Weigh the dry solid mass in a previously
weighed watch glass.

f. Repeat the experiment for other samples of


milk.
Result:
Weight of watch glass: - 18.3 g
Volume of milk taken in each case: - 20ml
Different samples of milk contain different percentage of
casein:
Conclusion:

This study clearly indicated that the amount of casein


precipitated from the cow milk was higher than that of
the other milk samples. The quantitative analysis of
casein precipitated from the various milk samples
provide the ample scope to the cottage cheese
manufacture.

According to the research findings, cow milk


(Heritage) contains the largest amount of casein
protein. It was found that goat milk contains relatively
small amount of casein. Although the mineral content
of goat's milk and cow's milk is generally similar,
goat's milk contains more calcium, potassium, iron,
magnesium and sodium. All milk has lots of casein but
there are different types of casein and for someone
who has casein sensitivity, goat milk may provide an
alternative to which they do not react.
Precautions:

1.During filtration, press the casein formed.

2.Use only the required amount of acid for complete


precipitation.

3.Use only fresh milk.

4.Use same amount of each sample for the


experiment.

5.Add ammonium sulphate solution very slowly.

6.Take the amount readings carefully with digital


weighing machine only.
Bibliography:

• https://www.seminarsonly.com/Engineering-
Projects/Chemistry/amount-of-casein.php

• https://en.wikipedia.org/wiki/Casein

• http://www.milkfacts.info/Milk%20Composition/Milk%2
0Composition%20Page.htm

• https://www.ijraset.com/research-paper/casein-
quantity-in-different-samples-of-milk

You might also like