Professional Documents
Culture Documents
S P E C I F I C AT I O N S
TRANSMISSION
Type........................................................direct-drive power shift direct-drive power shift direct-drive power shift
Oil filtration ...........................................10 micron pressure side with by-pass 10 micron pressure side with by-pass 10 micron pressure side with by-pass
AXLES
Final drives.............................................heavy-duty planetary, mounted heavy-duty planetary, mounted heavy-duty planetary, mounted
inboard inboard inboard
Differentials ...........................................hydraulic locking, operated on the go hydraulic locking, operated on the go hydraulic locking, operated on the go
Front axle oscillation .............................30 degrees, stop to stop 30 degrees, stop to stop 30 degrees, stop to stop
BRAKES
Service brakes .........................................long-life, inboard-mounted wet disc long-life, inboard-mounted wet disc long-life, inboard-mounted wet disc
oil cooled, self-adjusting and equalizing oil cooled, self-adjusting and equalizing oil cooled, self-adjusting and equalizing
front and rear axles front and rear axles front and rear axles
Parking brake .........................................automatically spring-applied, hydrauli- automatically spring-applied, hydrauli- automatically spring-applied, hydrauli-
cally-released, sealed and lubricated, cally-released, sealed and lubricated, cally-released, sealed and lubricated,
wet multi-disc, integrally mounted in wet multi-disc, integrally mounted in wet multi-disc, integrally mounted in
transmission transmission transmission
STEERING
Frame articulation..................................90 degrees total, stop to stop 90 degrees total, stop to stop 90 degrees total, stop to stop
Steering wheel with OrbitrolTM valve
16
99-10 English version 1/30/01 10:39 AM Page 17
S P E C I F I C AT I O N S
WINCH (OPTIONAL)
Type........................................................sealed, wet multi-disc clutch and brake sealed, wet multi-disc clutch and brake sealed, wet multi-disc clutch and brake
pressurized lubrication pressurized lubrication pressurized lubrication
single lever control single lever control single lever control
Cable capacity ........................................4000 (8-in. drum) 4000 (10-in. drum) 4000 (8-in. drum) 4000 (10-in. drum) 6000 (11-in. drum)
0.625-in. (15.8 mm) cable................254 ft. (77.4 m) 199 ft. (60.6 m) 254 ft. (77.4 m) 199 ft. (60.6 m) 373 ft. (114 m)
0.75-in. (19.1 mm) cable..................179 ft. (54.6 m) 141 ft. (43 m) 179 ft. (54.6 m) 141 ft. (43 m) 263 ft. (80.2 m)
0.875-in. (22.2 mm) cable................129 ft. (39.3 m) 101 ft. (30.8 m) 129 ft. (39.3 m) 101 ft. (30.8 m) 189 ft. (58 m)
1-in. (25.4 mm) cable.......................100 ft. (30.5 m) 78 ft. (23.8 m) 100 ft. (30.5 m) 78 ft. (23.8 m) 147 ft. (45 m)
Linepull @ peak engine and 0.625-in.
(15.8 mm) cable ...............................bare drum full drum bare drum full drum bare drum full drum
4000 (8-in. drum high speed) ..........34,786 lb. 21,437 lb. 41,860 lb. 25,797 lb.
(155 kN) (95 kN) (186 kN) (115 kN)
4000 (8-in. drum standard speed) .....40,525 lb. 24,974 lb. 48,767 lb. 30,053 lb.
(180 kN) (111 kN) (217 kN) (134 kN)
4000 (10-in. drum high speed) ........32,985 lb. 24,974 lb. 39,694 lb. 30,053 lb.
(147 kN) (111 kN) (177 kN) (134 kN)
6000 ....................................................................................................................................................................................46,861 lb. 29,763 lb.
(208 kN) (135 kN)
Line speed @ 2,200 rpm and 0.625-in.
(15.8 mm) cable ...............................bare drum full drum bare drum full drum bare drum full drum
4000 (8-in. drum high speed) ..........146 fpm 242 fpm 146 fpm 242 fpm
(44.5 m/min.) (73.8 m/min.) (44.5 m/min.) (73.8 m/min.)
4000 (8-in. drum standard speed) .....131 fpm 218 fpm 131 fpm 218 fpm
(40.0 m/min.) (66.4 m/min.) (40.0 m/min.) (66.4 m/min.)
4000 (10-in. drum high speed) ........157 fpm 208 fpm 157 fpm 208 fpm
(47.9 m/min.) (63.4 m/min.) (47.9 m/min.) (63.4 m/min.)
6000 ....................................................................................................................................................................................145 fpm 228 fpm
(44.2 m/min.) (69.5 m/min.)
CAPACITIES (U.S.)
Fuel tank ................................................50 gal. (189 L) single function 70 gal. (265 L) 72 gal. (273 L)
dual function 60 gal. (227 L)
Cooling system ......................................30 qt. (24.6 L) 30 qt. (28.4 L) 30 qt. (28.4 L)
Engine lubrication, including filter.......20 qt. (18.9 L) 20 qt. (18.9 L) 25 qt. (23.7 L)
Transmission..........................................7.75 gal. (29.3 L) 7.75 gal. (29.3 L) 7.75 gal. (29.3 L)
Differentials
Front.................................................4.5 gal. (17 L) 4.5 gal. (17 L) 7.5 gal. (28.4 L)
Rear...................................................4.5 gal. (17 L) 7.5 gal. (28.4 L) 7.5 gal. (28.4 L)
Winch ....................................................9.3 gal. (35.2 L) 9.3 gal. (35.2 L) 12 gal. (45.4 L)
Hydraulic reservoir.................................8 gal. (30.3 L) 11 gal. (41.6 L) 11 gal. (41.6 L)
OPERATING WEIGHTS
single function single function dual function single function dual function
Standard equipment ..............................21,740 lb. 26,639 lb. 28,150 lb. 31,489 lb. 32,450 lb.
(9861 kg) (12 083 kg) (12 768 kg) (14 288 kg) (14 719 kg)
17
99-10 English version 1/30/01 10:39 AM Page 18
D I M E N S I O N S
18
99-10 English version 1/30/01 10:39 AM Page 19
D I M E N S I O N S
19
99-10 English version 1/30/01 10:39 AM Page 20
A D D I T I O N A L E Q U I P M E N T
ENGINE drives, sealed and lubricated, self ad- Air conditioner, (R134A refrigerant) /
Antifreeze, –33°F (–36°C) ● ● ● justing and equalizing front and rear Heater, 40,000 Btu/hr. (11.8 kW) /
Blower-type cooling fan, enclosed with guard ● ● ● Parking ● ● ● Pressurizer
Coolant recovery tank ● ● ● Spring applied, hydraulically released, Cab, hydraulic tilt for service ● ● ●
Electric fuel shutoff with start switch key ● ● wet multi-disc, integrally mounted
TIRES
Fuel filter, vertically mounted, quick release ● ● ● in transmission
23.1-26, 14 ply rating ●
Fuel/water separator, vertically mounted, ● ● ● OPERATOR’S STATION 23.1-26, 14 ply rating, narrow gauge ■
quick release
Gauges, electric, illuminated ● ● ● 28L-26, 12 ply rating ■
Isolation-mounted engine ● ● ● Engine coolant temperature / Fuel level 28L-26, 12 ply rating, narrow gauge ■ ■
Muffler, low restriction, externally mounted ● ● ● Fire extinguisher ● ● ● 28L-26, 14 ply rating ■ ■
Oil drain shutoff for spill-free oil changes ● ● ● Foot throttle ● ● ● 24.5-32, 12 ply rating, narrow gauge ■ ■
Oil filter, spin-on, vertical mount, full ● ● ● Hand throttle ■ ■ ■ 24.5-32, 16 ply rating ■ ■ ■
flow with by-pass
Full function monitor instrumentation ● ● ● 30.5-32, 16 ply rating ● ●
Oil-to-coolant engine oil cooler ● ● ● with audible warning alarm for
Padlock-ready engine side shields ● ● ● Air filter restriction indicator / Alternator
HYDRAULIC SYSTEM
Side-by-side mounted radiator, transmission, ● ● ● voltage / Engine coolant temperature / “Constant hold” grapple close ● ● ●
and hydraulic oil cooler
Engine oil pressure / Hydraulic oil filter “Four wire” grapple hoses ● ● ●
Electric ether starting aid ■ ■ ■ restriction / Hydraulic oil temperature / Hydraulic oil cooler, side-by-side mounted ● ● ●
to radiator
ELECTRICAL Park brake / Transmission oil pressure /
Push button grapple rotate ● ● ●
Alternator, 65 amp ● ● Transmission oil temperature / Trans-
Single lever, “joystick” controls (single ● ● ●
Alternator, 135 amp ■ ■ ● mission oil filter restriction
function grapples)
Battery disconnect ● ● ● Hourmeter in monitor ● ● ●
● ● ● Dual lever, “joystick” controls (dual ● ●
Battery, dual, heavy duty, low maintenance ● ● ● Operator manual with storage compartment
function grapples)
Load center electrical system with blade- ● ● ● Steering wheel with full power steering ● ● ●
Vinyl suspension seat with ● ● ● Vertical, spin-on return oil filter, 10 micron ● ● ●
type fuses
with by-pass
Work lights (halogen, 2 front, 2 rear) ■ ■ ■ Fore/aft adjustment / Height, weight
Work lights (halogen, 4 front, 4 rear) ■ ■ ■ adjustment / Adjustable backrest GRAPPLE
TRANSMISSION
angle / Adjustable lumbar support / Cast-steel, wear-resistant tong tips ● ● ●
Armrests, two position Continuous 360-degree grapple head ● ● ●
Direct drive power shift with 8 forward ● ● ● Fabric- or air-suspension seat with ■ ■ ■ rotation
and 7 reverse speeds Fore/aft adjustment / Height, weight ad- Dual cylinder bunching-style grapple head ● ● ●
Isolation-mounted transmission ● ● ● justment / Adjustable backrest angle / Heavy-duty, high-torque rotate motor ● ● ●
Oil filter, pressure side, 10 micron with ● ● ● Lumbar support / Armrests, two position with gear reduction
by-pass, spin-on, vertical mount Operator protection with ● ● ● Single function with 85-in. tong opening ●
Park brake, wet multi-disc, spring applied, ● ● ● Integral ROPS, FOPS, OPS protective struc- Single function with 115-in. tong opening ●
hydraulically released, sealed and ture / Non cab-equipped machines Single function with 123-in. tong opening ●
lubricated include tinted polycarbonate front Dual function with 115-in. tong opening ■
Transmission oil cooler, side-by-side ● ● ● windows and screens on all other Dual function with 123-in. tong opening ■ ■
mounted with radiator openings, cab-equipped machines Dual function with 127-in. tong opening ■ ■
Transmission disconnect, for cold weather ■ ■ include polycarbonate windows on
starting all openings with screens on the door WINCH
AXLES windows only / Lockable doors with Model 4000 (8-in. drum high speed) ■ ■
start switch key / Mirror, rearview, Model 4000 (8-in. drum standard speed) ■ ■
Differential lock, hydraulically applied, ● ● ● Model 4000 (10-in. drum high speed) ■ ■
interior mounted / Headliner /
engaged on the go, front and rear, with
Retractable seat belt Model 6000 (11-in. drum) ■
engagement indicator on dash
Heavy-duty inboard planetary final drives ● ● ● Cab, fully enclosed, with (in addition to ■ ■ ■ FRAMES
standard equipment)
Inboard sealed and lubricated wet disc ● ● ● Articulation locking bar, self storing ● ● ●
Windows, tinted polycarbonate on all
brakes, front and rear Frame clean-out and service doors ● ● ●
openings, screens only on door win-
Self-contained differential ● ● ● Stacking blade, 86-in. wide, with replace- ● ●
dows / Windshield wiper and washer,
Lock hydraulic circuit with filter able cutting edge
front / Sliding windows, left and right
BRAKES Stacking blade, 116-in. wide, with replace- ●
door opening / Heater / Defroster fan,
able cutting edge
Service ● ● ● left front / Floormat
Stacking blade extensions, 15 in. (381 mm) ■ ■
Disc type, mounted inboard of axle final Cab climate control module with ■ ■ ■ per side
KEY: ● Standard equipment ■ Optional or special equipment See your John Deere dealer for further information.
Net engine power is with standard equipment including air cleaner, exhaust system, Specifications and design subject to change without notice. Wherever applicable, specifications are in
alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 70 020, accordance with SAE standards. Except where otherwise noted, these specifications are based on units
using No. 2-D fuel at 35 API gravity. No derating is required up to 10,000 ft. (3050 m) with full fuel tanks, 175-lb. (79 kg) operators, and standard equipment; 548G and 648G units with 28L-26,
altitude. Gross power is without cooling fan. 12 PR LS2 tires; and 748G unit with 30.5-32, 12 PR LS2 tires.
20
DKA548GII Litho in U.S.A. (99-10)