You are on page 1of 6

MAIN

COMPONENT
OF IBS

BY:ILHANZ
PRECAST CONCRETE SYSTEM

• Precast concrete system is the


most widely used IBS system in
Malaysia.
• It consists of precast concrete
columns, beams, slabs, walls,
staircases and building
components such as toilet pods,
balconies, lift chambers, refuse
chamber.
PREFABRICATED TIMBER
FRAMING SYSTEM
• Prefabricated timber framing
system involves the timber
frames, roof trusses, beams and
columns.
• It is commonly used in simple
dwelling units with high aesthetic
value such as chalets and resorts.
BLOCKWORK SYSTEM
• The blockwork system is the alternative to the traditional
brick laying technique.
• This system consists of interlocking masonry unit and
lightweight concrete blocks, which may include hollow
cores to make them lighter while improving insulation
properties.
FORMWORK SYSTEM
• This system is the least prefabricated as site casting is
normally involved.
• Formwork system consists of tunnel forms, tilt up systems,
beams and columns mounding forms and permanent
steelwork form.
STEEL FRAMING SYSTEM
• Steel framing system consists of
steel beams and columns, roof
trusses and portal framing system.
• It is usually used in high-rise
buildings and skyscrapers due to
its fast rapid erection site. This
system also has the capacity to
transfer heavy loads on a larger
span.

You might also like