Plain faced cladding roll is recommended for roofing applications and foil faced cladding roll is recommended for vertical applications with the foil facing towards the inner liner. Cladding roll is supplied compressed and wrapped in waterproof packaging for outdoor storage and can be used with acoustic infill pieces fitted in perforated liner trays to provide sound absorption and reduction. Rockwool also supplies structural panels to composite panel manufacturers who have developed fire safe composite panels for internal and external use.
Plain faced cladding roll is recommended for roofing applications and foil faced cladding roll is recommended for vertical applications with the foil facing towards the inner liner. Cladding roll is supplied compressed and wrapped in waterproof packaging for outdoor storage and can be used with acoustic infill pieces fitted in perforated liner trays to provide sound absorption and reduction. Rockwool also supplies structural panels to composite panel manufacturers who have developed fire safe composite panels for internal and external use.
Plain faced cladding roll is recommended for roofing applications and foil faced cladding roll is recommended for vertical applications with the foil facing towards the inner liner. Cladding roll is supplied compressed and wrapped in waterproof packaging for outdoor storage and can be used with acoustic infill pieces fitted in perforated liner trays to provide sound absorption and reduction. Rockwool also supplies structural panels to composite panel manufacturers who have developed fire safe composite panels for internal and external use.
Cladding Roll Tools required • Sharp insulation knife or cutting tool • Tape measure
Fixing and application
Plain Faced Cladding Roll is recommended for use in roofing applications.
Foil Faced Cladding Roll is recommended for use in
vertical applications and should be installed with the foil facing towards the inner liner.
Packaging
ROCKWOOL Cladding Roll is supplied compression
wrapped on pallets protected by a waterproof covering which allows the product to be stored outside for a limited time period. Health & safety The mechanical effect of fibres in contact with skin may cause temporary itching. Perforated liner trays Cover exposed skin Cladding Roll can also be used in conjunction with When working in unventilated area wear ROCKWOOL Acoustic Infill pieces fitted within the disposable face mask. trapezoidal sections of a perforated liner tray to provide both sound absorption and reduction. ROCKWOOL trapezoidal Acoustic Infills are supplied tissue faced. Clean area using vacuum equipment.
Composite panels Waste should be disposed of according to local
regulations. ROCKWOOL also supplies structural panel products to composite panel manufacturers who have developed a wide range of fire safe composite panels for use both Rinse in cold water before washing. internally and externally. The external panel systems include wall constructions that achieve up to four hours stability and one hour of integrity and insulation. These Ventilate working area if possible. systems are suitable for use less than one metre from the relevant boundary.
Installation will be in accordance with the system into Wear goggles when working overhead.
which the product is installed – please contact the
system holder for more information.
Page: 1/1 Installation guide: Cladding Roll
www.rockwool.com/uk Issued: 22/2/2021 Version no: 01