The document describes a 3-piece packing tamper set used for installing braided or compression packing seals in pumps and valves. The set includes adjustable tamping tools in 1/4", 3/8", and 1/2" sizes made of 92 durometer urethane that can be cut to fit specific shaft or stem diameters. The tamper set and individual tools are available using Palmetto style numbers 3300 for the set or individual sizes.
The document describes a 3-piece packing tamper set used for installing braided or compression packing seals in pumps and valves. The set includes adjustable tamping tools in 1/4", 3/8", and 1/2" sizes made of 92 durometer urethane that can be cut to fit specific shaft or stem diameters. The tamper set and individual tools are available using Palmetto style numbers 3300 for the set or individual sizes.
The document describes a 3-piece packing tamper set used for installing braided or compression packing seals in pumps and valves. The set includes adjustable tamping tools in 1/4", 3/8", and 1/2" sizes made of 92 durometer urethane that can be cut to fit specific shaft or stem diameters. The tamper set and individual tools are available using Palmetto style numbers 3300 for the set or individual sizes.
The Pal-Tamper is used to install braided/compression seal packing in pumps and valves. It is a 3-pc packing tamper set comprised of 3 adjustable tamping tools ¼”, 3/8” and ½” that can be cut to fit a specific shaft or valve stem size. The material is made of 92 durometer urethane.
You can also purchase Pal-Tampers as a set or individually using the following Palmetto style numbers: 3300- Tamper 3-pc set 3300 - Tamper ¼” 3300 - Tamper 3/8” 3300-Tamper ½”