Professional Documents
Culture Documents
EN ISO 12944-5 (2019) (E) Codified
EN ISO 12944-5 (2019) (E) Codified
10/2019
ILNAS-EN ISO 12944-5:2019
National Foreword
https://portail-qualite.public.lu/fr/normes-normalisation/participer-normalisation.html
English Version
acier par systèmes de peinture - Partie 5: Systèmes de Stahlbauten durch Beschichtungssysteme - Teil 5:
peinture (ISO 12944-5:2019) Beschichtungssysteme (ISO 12944-5:2019)
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12944-5:2019 E
worldwide for CEN national Members.
EN ISO 12944-5:2019 (E) ILNAS-EN ISO 12944-5:2019
Contents Page
European foreword....................................................................................................................................................... 3
ILNAS-EN ISO 12944-5:2019 - Preview only Copy via ILNAS e-Shop
2
ILNAS-EN ISO 12944-5:2019 EN ISO 12944-5:2019 (E)
European foreword
This document (EN ISO 12944-5:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12944-5:2019 has been approved by CEN as EN ISO 12944-5:2019 without any
modification.
3
INTERNATIONAL
ILNAS-EN ISO 12944-5:2019
ISO
STANDARD 12944-5
Fourth edition
2019-09
Reference number
ISO 12944-5:2019(E)
© ISO 2019
ISO 12944-5:2019(E) ILNAS-EN ISO 12944-5:2019
ILNAS-EN ISO 12944-5:2019 - Preview only Copy via ILNAS e-Shop
Contents Page
Foreword......................................................................................................................................................................................................................................... iv
Introduction...................................................................................................................................................................................................................................v
1 Scope.................................................................................................................................................................................................................................. 1
2 Normative references....................................................................................................................................................................................... 1
3 Terms and definitions...................................................................................................................................................................................... 1
4 Classification of environments............................................................................................................................................................... 3
5 New work and refurbishment.................................................................................................................................................................. 3
5.1 New work and total refurbishment........................................................................................................................................ 3
5.2 Partial refurbishment......................................................................................................................................................................... 4
6 Types of paint........................................................................................................................................................................................................... 4
ILNAS-EN ISO 12944-5:2019 - Preview only Copy via ILNAS e-Shop
6.1 General............................................................................................................................................................................................................ 4
6.2 Examples of generic type of paints......................................................................................................................................... 4
6.2.1 Alkyd paints (AK)............................................................................................................................................................. 4
6.2.2 Acrylic paints (AY)........................................................................................................................................................... 4
6.2.3 Ethyl silicate paints (ESI)........................................................................................................................................... 5
6.2.4 Paints for epoxy coatings (EP).............................................................................................................................. 5
6.2.5 Paints for polyurethane coatings (PUR)....................................................................................................... 5
6.2.6 Paints for polyaspartic coatings (PAS)........................................................................................................... 6
6.2.7 Paints for polysiloxane coatings (PS).............................................................................................................. 6
7 Paint systems............................................................................................................................................................................................................. 6
7.1 Priming coats and type of primers......................................................................................................................................... 6
7.1.1 General...................................................................................................................................................................................... 6
7.1.2 Types of primer.................................................................................................................................................................. 6
7.2 Subsequent coats................................................................................................................................................................................... 7
7.2.1 General...................................................................................................................................................................................... 7
7.2.2 Intermediate coats.......................................................................................................................................................... 7
7.2.3 Topcoats................................................................................................................................................................................... 7
7.3 Dry film thickness................................................................................................................................................................................. 7
7.4 Durability...................................................................................................................................................................................................... 7
7.5 Shop and site application................................................................................................................................................................ 8
8 Tables for protective paint systems for C2 to C5, Im1, Im2 and Im3............................................................... 9
8.1 Reading the tables................................................................................................................................................................................. 9
8.2 Parameters influencing durability.......................................................................................................................................... 9
8.3 Designation of the paint systems listed.............................................................................................................................. 9
8.4 Guidelines for selecting the appropriate paint system......................................................................................... 9
Annex A (normative) Abbreviated terms and descriptions.......................................................................................................10
Annex B (normative) Minimum requirements for corrosion protection systems..............................................11
Annex C (informative) Paint systems for carbon steel.....................................................................................................................15
Annex D (informative) Paint systems on hot dip galvanized steel.......................................................................................18
Annex E (informative) Paint systems on thermal-sprayed metallic coatings..........................................................20
Annex F (informative) Pre-fabrication primers......................................................................................................................................21
Bibliography.............................................................................................................................................................................................................................. 23