Professional Documents
Culture Documents
> Very simple construction with the use of few parts only Stepper
TYPICAL APPLICATIONS
Peristaltic
SR10/30 DC Standard
12/24 V DC 46 1,81
For short time operation only
~35 1,38
~35 1,38
Ø3,2 0,13
Flow 16 – 55 ml/min
2x
17,5 0,69
40 1,57
40 1,57
56 2,20
48 1,89
48 1,89 54 2,13
37 1,46
Dimensions in mm [inch]
Dimensions in mm [inch]
Ø4,3 0,17
Ø28,7 1,13
4x
Ø28,7 1,13
13,5 0,53
68,05 2,68
68 2,68
23 0,91
28 1,10
SR10/30 DC
angled fixing 17,5 0,69
Tube lifetime
1 20
Novoprene
runtime in minutes
runtime in minutes
15
500 h2)
PharMed BPT®
10
Drive
5
2) C
hange the complete cassette. We recommend to roughen the shaft in axial
direction when changing the cassette (sand paper grit size 150). If the pump is
stored longer than three months, we recommend to take the cassette off the
motor shaft and store it separately.
24 V DC: 90 – 150 mA
Flow
runtime in minutes
15
10
6s
Flow
5
5 10 15 20
min. idle time in minutes
6s
Flow
2
0
SR10/30 DC Performance
12/24 V
For short time operation only
Flow 20 – 80 ml/min
View Z
unshielded
0.28
0.51
-
-
Z
View Z
unshielded
2.5 0.10 51 2.01 -
Dimensions in mm [inch]
1.22
soldering connectors 3x0.5
Weight 0.16 kg
Ø13 0,51
Ø31 1,22
46 1,81 soldering connectors 3x0.5
~35 1,38
-
40 1,57
56 2,20
17,5 0,69
2,5 0,10
7 0,28
Dimensions in mm (inch)
48 1,89
37 1,46
81 3,19
SR10/30 DC
Angled flange Bühlermotor 24 VDC
Ø4,3 0,17
12 VDC
6 VDC
28 1,10
Weight 0.16 kg
straight 1.0 20
angled
20300122 20300130 straight 1.5 37
20300126 20300134 angled
20300123 20300131 straight 2.0 55
20300127 20300135 angled
20300124 20300132 straight 2.5 80
20300128 20300136 angled
Novoprene
runtime in minutes
runtime in minutes
15
500 h3)
PharMed BPT®
10
Drive
5
3
10
6s
SR10/30 Stepper
24 V DC Molex KK
Type 6471
For short time operation only
~35 1,38
Circuit board recommended for test purposes
Flow 0.5 – 20 ml/min Litzen leadwire
300mm, UL 1061
AWG 28
40 1,57
46 1,81
28 1,10
56 2,20
38 1,50
Dimensions in mm (inch)
48 1,89
(Winding Diagram)
37 1,46
Ø4,3 0,17
BLK
Ø35 1,38
4x
BRW
8 0,31
YEL ORG
17,5 0,69
Weight 0.08 kg
24 V =
or
20 V ~ on / off internal
0.5A speed selection
1 n1 n2 n3 n4 14 13
+/- priming
UB X1 J1 with n max.
-/+
2 rotation speed n
1
X2 5 kOhm
stepper motor
SR10/30
SR25 X3
J2
F120 cw / ccw
Int./Ext. connector open = cw
4 5Volt
2 1 30mA
Imp. setpoint
indication
0Volt
runtime in minutes
72
runtime in minutes
50 15
42
(1.6 (2)
5)
10
Electrical Data - Max. flow 2) ml/min (adjustable range 4 – 100%) Duty cycles
Drive
runtime in minutes
4
Spare parts SR10/30 series
Tubing Drive
Inner Ø x Wall thickness DC Std. DC Performance
/ Stepper
˜ 55 (2.16)
Novoprene 2.0 x 1.0 mm 92030702 92030513
Novoprene 2.5 x 1.0 mm 92030701 92030704
Tubing dimensions
1.5 x 1.0 mm
5
General Tubing Information
Tubing Properties
Tube Characteristics Limitations
Novoprene Standard tubing for the SR10/30, SR10/50 and SR25 May swell up with oil or oily liquids
Long lifetime
Wide range of applications
PharMed BPT™ High quality for medical, laboratory and research use
Homogeneous structure and therefore comparatively better
chem. resistance
Autoclavable
Biocompatible
Long lifetime
Silicone Suitable for polar solvents Not recommended with strong acids or alkaline solutions
(with the exception of chlorinated Swells up in many organic solutions
aliphatic and aromatizised hydrocarbon)
No detachment of softening agents
Very stable elasticity over a wide temperature range
(–30 bis 180 °C)
6
Chemical Compatibility
Chemical Resistance of Tubing Materials
N = Novoprene Nor = Norprene® Ph = PharMed BPT / Pharm-A-Line™ S = Silicone
N Ph/Nor S N Ph/Nor S
7
PUMP AND COMPRESSOR SOLUTIONS FOR OEMS WORLDWIDE
gd-thomas.com
Gardner Denver Thomas GmbH Gardner Denver Thomas. Inc. Gardner Denver Thomas Pneumatic Systems (Wuxi) Co., Ltd.
Livry-Gargan-Str. 10 1419 Illinois Avenue No. 1 New Dong An Road, Shuofang Town, Wuxi, Xinwu District
82256 Fürstenfeldbruck Sheboygan. WI 53081 Jiangsu 214142
Germany USA China
T +49 8141 2280 0 T +1 920 4574891 T +86 510 6878 2258
F +49 8141 8892136 F +1 920 4514276 F +86 510 6878 2200
thomas.de@gardnerdenver.com td.usa@gardnerdenver.com thomas.cn@gardnerdenver.com
The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to
help in the selection of Thomas products. It is the responsibility of the user to determine the suitability of the product for the intended use and the user assumes all risk and
liability in connection therewith. Thomas does not warrant, guarantee or assume any obligation or liability in connection with this information.
Models presented in this catalog are representative of the product family. Photos of products pictured in this catalog do not necessarily represent a specific model number.
To obtain further information for custom options, contact your local Thomas office.
Printed in Germany Form No. SR10/30 10/2021 © Gardner Denver Thomas GmbH. All rights reserved.