This code reads the voltage from an analog sensor on pin A0, prints it to the serial monitor every second, and controls the state of digital pins 7 and 8 based on the voltage. If the voltage is 2.97, it increments a counter and prints "a", and if 2.98 it resets the counter and prints "b". It sets pin 8 low if the voltage is over 4, and toggles pin 7 if the voltage is outside the range of 2.82 to 3.06.
This code reads the voltage from an analog sensor on pin A0, prints it to the serial monitor every second, and controls the state of digital pins 7 and 8 based on the voltage. If the voltage is 2.97, it increments a counter and prints "a", and if 2.98 it resets the counter and prints "b". It sets pin 8 low if the voltage is over 4, and toggles pin 7 if the voltage is outside the range of 2.82 to 3.06.
This code reads the voltage from an analog sensor on pin A0, prints it to the serial monitor every second, and controls the state of digital pins 7 and 8 based on the voltage. If the voltage is 2.97, it increments a counter and prints "a", and if 2.98 it resets the counter and prints "b". It sets pin 8 low if the voltage is over 4, and toggles pin 7 if the voltage is outside the range of 2.82 to 3.06.