Professional Documents
Culture Documents
DESCRIPTION
Customized Integration with onsite Startup (Package 3) is designed to provide factory configuration and racking with onsite setup and turn-on for the customer
who wants Hewlett-Packard Enterprise to perform the customization and deployment activities required to bring the solution up to an application-ready state.
KEY FEATURES
Custom slotting of relevant system components (e.g. I/O cards, disks, etc.)
Loading of selected operating system version and subsystem elements that are supported by HPE, but not available as “Factory Pre-Installed”.
Loading of custom image if HPE automated image load process is enabled (see the “special considerations” section)
Setup of the LVM and kernel parameters, swap space, and memory; BIOS setting/hostname & IP address; time zone; etc.
Customized internal server storage RAID settings (above and beyond standard RAID setting part number offering)
Solution configuration test
Customer defined firmware revisioning (not available in EMEA)
Data Capture and Reporting
Custom placement within the rack of HPE rackable products to the customer’s specifications
Cabling and interconnect of all hardware components within the rack (customer-specified or HP best practices)
Cable labeling (HPE best practices)
Standard external RAID setting (e.g. 0, 1, 5) for JBOD disk enclosures (i.e. disk enclosures where the RAID controller is in the server)
External Disk OS load (disk enclosure must be in the same rack as the server)
Service Planning
Server hardware configuration and integration
Server operating system environment installation and configuration
HPE BladeSystem hardware configuration and integration
HPE BladeSystem operating system install
HPE Disk array racking and integration
HPE tape library and autoloader racking and integration
Network switch racking and integration
Verification testing
Onsite final install and startup
See the data sheet for more details on specific deliverables for this package at http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA3-5493ENN.pdf
CUSTOMER BENEFIT
Enhanced IT resources and operations
Solution is built and racked to customer’s exact specifications and installed at the customer location
HPE Service Specialist will perform final turn-on activities at customer’s site
UP-SELL OPPORTUNITIES SPECIAL
CONSIDERATIONS
Customer Designed Solution Integration (Package 4)– Includes more Order HA453A1 - 000 one time per rack (or one time per order for
customization. non-racked solutions).
HPE Designed Solution Integration (Package 5)– Design help for customers who Order HA453A1 - 001, - 003, - 011, - 013, - 021, -022, and -023 to
want HPE to recommend and develop the technical specifications for the solution. match the quantity of servers or storage products ordered. (-003 is
Image setup or creation services for loading custom images (HA853A1#001- per HPE BladeSystem enclosure)
#007.) A prerequisite for loading a custom image is the purchase of one of
A la carte services (see a la carte services individual service descriptions). the Image NRE Set Up Services (HA853A1-#001-#007) to enable
HPE Support Plus – for support of their HW & SW. image load from depot.