Professional Documents
Culture Documents
Illustration 1 g01357460
(1) Crankshaft main bearing journal
Illustration 2 g01357462
(2) Support the crankshaft in a set of vee blocks. Measure the runout dimension at the center journal. Maximum runout ... 0.04 ± 0.10 mm
(0.002 ± 0.004 inch)
Illustration 3 g01356072
(3) Crankshaft end play ... 0.100 ± 0.246 mm (0.0039 ± 0.0097 inch)
Replace the standard thrust plates if the end play exceeds the standard clearance. Three oversize thrust plates are available as replacements if the
end play still exceeds the maximum limit. Generally, the rear journal is likely to be worn more rapidly than the front journal. If necessary, replace the
rear thrust plate. Refer to Table 1 for oversize thrust plates.
Dimensions for Grinding of Crankshaft
Table 1
Torque for the crankshaft pulley nut ... 707.5 ± 57.5 N·m (520 ± 42 lb ft)
The maximum temperature for installing the crankshaft gear is the following value. ... 250 °C (482 °F)
296-4650: A6F1-UP, A8F1-UP, A9F1-UP, BWW1-UP, BYM1-UP, BZF1-UP, CYZ1-UP, DHE1-UP, EAX1-UP, EJT1-UP, FAL1-UP, GDP1-UP, GKS1-UP, GMX1-UP,
HJC1-UP, JFZ1-UP, JLG1-UP, KBZ1-UP, KGF1-UP, KHN1-UP, KLM1-UP, LFL1-UP, MCH1-UP, MDT1-UP, MPG1-UP, NAS1-UP, NDE1-UP, NES1-UP, PBD1-UP,
PBE1-UP, PCX1-UP, PHX1-UP, RAC1-UP, SED1-UP, SPN1-UP, SRT1-UP, TAE1-UP, TDH1-UP, TXA1-UP, WGC1-UP, XCK1-UP, YDS1-UP, YSD1-UP, ZGB1-UP,
ZMF1-UP
PIP-11154155
2022/04/21
01:40:35+07:00
i02703313
© 2022 Caterpillar Inc.
Caterpillar:
Confidential Green