Table 9.14 (Continued)
Welder and Welding Operator Qualification-Number and Type of Specimens and
Range of Thickness and Diameter Qualified (Dimensions in Millimeters) (see 9.17.1
‘esis on Pipe or Tubing? Number of Specimens Nominal Plate,
Nominal Pipe | Pipe or Tube
Production CP 1Gand 26 8G, 66, and 6GR or Tube Size | Wall Thickness!
Groove Butt Joints Positions Only Pesitions Oaly Qualified, mm | Qualified, mm
Nominal] Nominal
Type | Sizeof | Test
of Test [IestPipe| Thickness, Face | Root | side | Face | Root | Side
Weld | mm | mm | Bend’ | Bend? | Bend? | Bend’ | Bend! | Bend? | Min, | Max. | Min. | Max.
Groove | =100 [Untimited| 1 | 1 |Notee| 2 | 2 [Nowe] 2 | 10 | 3 | 2
Groove | >100 | s10 | 1 | 1 |Nowe| 2 | 2 | Nowe| Nowe | Unlimicd| 3 | 20
Groove [>100 | > | — | — | 2 | — | — | 4 | Note | Unimiea] 5 | Untimi
Qualified Dimensions BRANCH CONN.
Production T, Yor Number of | Nominal Pipe orTube | Nominal Wall or Plate | Dihedal Angles
K-Connection CJP Groove Welds | Specimens? | Size Qualifted, mm —|Thickness# Qualified, mm] Qualifted®
Nominal | Nomina
Sweot | Test
‘Type ot | Test Pipe, | Thickness, | Side | Macro-
Test Weld | mm | mm | Bend? | etch | Min, | Max Max. | Min, | Max
Pipe Groove
re ag’ zton] 212 100 | Untimitea Unlimited Vatimited
Pipe Groove 7 ~ ;
treazg|<10D) 25 [Nei] — ] 20 100] 3 | Untimtea | 20° [ untimites
Box Groove Tinlimited | Climited ;
Bean | Umimted] 212] 4 |g [genes | Camis | 5 | untimted | 30° | Untimitea
Production TY. or
K. Connection Fillet Welds Number of Specimens* Qualified Dimensions
otntan | Nena ‘Nominal Pipe] Nominal Wall or
Seeor’| ‘Tex | Fle cor Tube Size | Plato Thickness | Dihedral Angles
Type of | Test Pipe [Thickness Weld | Macro- | Root | Face | _Qualiied.mm | Qualied, mm | Qualia
TestWeia| 1D | mm | Break | etch | Bend? | Bend? | hin, | Max [Min.[ Max. | Min. | Max
eye fUnimed | 23 | — | = | a | & | Notee | Unimited) 3° [Crimea] 30° |Untimited
Option I—
Fillet — few] or | oa | = | = J 600 funtimtea} 3 | untimited) 60° |tntimited
ig. 4.2598
‘Option 2—
Fillet = w | — | = | 2 | = J 600 funtimitea} 3 | Untinited) 60° [Untimited
ig. 4.28
Option 3—
Filet |Untimted) 23 f — | 1 | — | — |p fumimted] 3 |untimted | 30° Untimitea
Fig. 9.2)
' Al welds shall be visually inspected (see 422.1),
® Radiographic examination of the test pipe o tubing may be made in lew of the bend tests (See $.16.1.1)
« For 10 mm wall thickness, a sie-bend test may be substituted foreach ofthe required fce- and root-bend tess,
“Also qualifies for welding any filet or PJP weld size on any thickness of plate, pipe or tubing,
«The minimum pipe size qualified shal! be 1/2 the est diameter or 100 mm, whichover is greater.
* Seo Table 9.13 for appropriate groove details.
Two plates required, each subject to the test specimen requirements described. One plate shall be welded inthe 3F position andthe other inthe 4F postion.
* For dihedral angles < 30°, see 9.19.1; except 6GR test not required
"Twa root al wo face bends,
pagina 288