The document appears to be a table showing the element forces in frames from an SAP2000 analysis. It lists the frame number, station, output case, case type, axial force (P), shear forces (V2 and V3), torsion (T), and bending moments (M2) at each station along frame 1 under a dead load case. The forces are listed at 0.1 meter intervals along the full 8 meter length of the frame.
The document appears to be a table showing the element forces in frames from an SAP2000 analysis. It lists the frame number, station, output case, case type, axial force (P), shear forces (V2 and V3), torsion (T), and bending moments (M2) at each station along frame 1 under a dead load case. The forces are listed at 0.1 meter intervals along the full 8 meter length of the frame.
The document appears to be a table showing the element forces in frames from an SAP2000 analysis. It lists the frame number, station, output case, case type, axial force (P), shear forces (V2 and V3), torsion (T), and bending moments (M2) at each station along frame 1 under a dead load case. The forces are listed at 0.1 meter intervals along the full 8 meter length of the frame.