This Arduino code uses a soil moisture sensor connected to analog pin 0 to detect moisture levels in soil. It prints the sensor reading to the serial monitor and turns on the built-in LED on pin 13 when the reading exceeds a threshold of 250, indicating dry soil. Otherwise, the LED remains off. It runs this check every 100 milliseconds in a continuous loop.
This Arduino code uses a soil moisture sensor connected to analog pin 0 to detect moisture levels in soil. It prints the sensor reading to the serial monitor and turns on the built-in LED on pin 13 when the reading exceeds a threshold of 250, indicating dry soil. Otherwise, the LED remains off. It runs this check every 100 milliseconds in a continuous loop.
This Arduino code uses a soil moisture sensor connected to analog pin 0 to detect moisture levels in soil. It prints the sensor reading to the serial monitor and turns on the built-in LED on pin 13 when the reading exceeds a threshold of 250, indicating dry soil. Otherwise, the LED remains off. It runs this check every 100 milliseconds in a continuous loop.