Professional Documents
Culture Documents
MK IND DentalBooklet V01 FN EN
MK IND DentalBooklet V01 FN EN
com Dental
Xtreme® 3SP® Ortho & Xede® 3SP® Ortho
3Dent®
ULTRA® 3SP® Ortho
Perfactory® 4 DDP Series
Perfactory® Pixcera / Desktop DDP
Perfactory® Vida Series
Photosensitive Resins
08 envisiontec.com
o ntic Appl
od i
an
h
Ort
al Drill Gu nture Bases
ces
gic i D e
de
r
Su
s Cl
e ar rs
A li g n e
i th R emov
tia l Dentur
W a ar e
bl
s
P
ls
eD
Mode
ies
d Bridge mporaries
an W Te
n
ax
Crow
ards Bite S
ups
Gu
ht
p li
Nig
nts
• availability and ease of use of CAD software to design restorations and models from scan data
• highly accurate, reliable 3D printers to replicate that data reliably and accurately
• a wide variety of materials for a broad spectrum of dental applications
CAD-based dental restorations using EnvisionTEC 3D printers deliver labor and material cost reduction as well
as higher clinical quality and consistency throughout the manufacturing process. Labs need to compete with
offshore production. Our low-cost, high-throughput solutions offer the requisite quality to level the global
playing field and improve dental lab competitiveness.
• Xede® 3SP® Ortho and Xtreme® 3SP® Ortho dental model printers use
Scan, Spin, and Selectively Photocure (3SP®) Technology and feature
larger build envelopes for high-production facilities
• Simple user interface with built-in touch screen and low part
cost due to minimal material waste
Maximum Build Envelope: 457 x 457 x 102 mm 254 x 362 x 102 mm*
Resolution in X & Y: 100 µm 100 µm
Dynamic Voxel** Resolution in Z: 50 - 100 µm*** 50 - 100 µm***
Footprint: 178 x 190 x 165 cm 165 x 165 x 165 cm
Electrical Requirement: 110-120/220-240 VAC, single-phase, 15 A.
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
• 3Dent and ULTRA 3SP Ortho dental model printers use Scan,
Spin, and Selectively Photocure (3SP) Technology
Build Envelope*: 115 x 72 x 220 mm 160 x 100 x 180 mm 192 x 120 x 180 mm
Projector Resolution: 1920 x 1200 pixels
Native Voxel** Size XY: 60 µm 83 µm 100 µm
ERM Voxel Size XY***: 30 µm 42 µm 50 µm
Footprint: 73 x 48 x 135 cm
Weight Approx: 85 kg
Electrical Requirement: 100 - 120 VAC, 50/60 Hz, single-phase, 5.4A; 220 - 240 VAC, 50/60 Hz, single-phase, 2.4 A
A
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. ** A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
System specifications are subject to change without notice. * Deviation of +/- 2mm possible. **A voxel is volumetric pixel.
*** Pre-Adjusted by each material module and material dependent.
E-Denstone
EnvisionTEC’s E-Denstone has been developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is
similar in look and feel to common die stones used in labs. It may be used in traditional manufacturing settings or for CAD-based 3D printing. This
is the only material that enables die trimming and margin marking without concerns for layer lines. Die paint sticks to the dies just like plaster and
will not peel off. The material achieves the look and feel of traditional gypsum models, making it preferable to other resin-based materials currently
on the market. The low-viscosity formula combined with the use of a high-accuracy 3D printer produces superior results with no loss of anatomical
detail. - For use with Perfactory®, Desktop, Micro, ULTRA® 3SP® and 3Dent® machines
14 envisiontec.com
E-Dent
EnvisionTEC’s E-Dent is a light-cured micro-hybrid filled dental crown and bridge material for long-term temporaries. It may be used on the
Perfactory® DDP and Micro machines. Provisionals are photo-polymerized on a voxel by voxel basis within the liquid resin. E-Dent may be
used for the printing of very tough veneers that are extremely accurate with a very fine surface finish. E-Dent is currently available in three
shades - A1, A2 and A3. Structures may be cut back and then layered using any light-curable shade composite. E-Dent has earned United
States Food and Drug Administration (FDA) approval for one year in the mouth. - For use with Perfactory DDP, Desktop DDP and Micro DDP machines
E-Partial
EnvisionTEC’s E-Partial chemistry was developed for building partials where some flex is required without damage. E-Partial material maintains
flexural strength to ensure clasp flex with greater toughness and no brittleness. The stiffness of E-Partial allows for production of a very
hard retention grid with super-tight, thin clasps to deliver a metal partial with the perfect fit every time. E-Partial can be also used for the
production of copings and crowns and is is especially recommended for larger build envelopes. - For use with Perfactory, Desktop and Micro DDP machines
Clear Guide
EnvisionTEC’s Clear Guide is the clearest material currently available, allowing maximum visibility for the production of accurate drill guides
on the Perfactory® DDP machines. Clear Guide has met the requirements of USP Class VI* certification testing and is suitable for approved
applications in the medical industries. - For use with Perfactory® DDP, Desktop DDP and Micro DGP machines
*DISCLAIMER: It is the responsibility of each customer to determine that its use of any Class VI certified material is safe, lawful and technically suitable to the customer’s intended applications. Customers
should conduct their own testing to ensure that this is the case.
Orthodontic Appliances
Machines Waxups Temporaries Partials and Aligners Models Drill Guides
Vida Hi-Res
Pixcera
*
DDDP
P4 DDP
P4 DDP M
P4 DDP XL
3Dent®
E-Denstone
E-Dent (A1,A2,A3)
E-Partial *
Clear Guide
E-Appliance
Ortho Tough
Specifications are subject to change without notice. *Waxups may be made on the DDP4 M only with E-Partial(EC1000) but not with Press-E-Cast (WIC300)
16 envisiontec.com
EnvisionTEC GmbH
Brüsseler Straße 51
D-45968 Gladbeck
Germany
Phone: +49 2043 9875 0
envisiontec.com • info@envisiontec.de
EnvisionTEC, Inc
15162 South Commerce Drive
Dearborn, MI 48120
USA
Phone: +1 313 436 4300
envisiontec.com • northamerica@envisiontec.com