You are on page 1of 2
FILLER METALS le} eg HOBART Fabshield® 21B ‘AWS AS.20: E71T-11 WELDING Positions: — came DEOGELD SLAG SySTEM: Fast freezing, basic!uoride type, flux-cored wire SHIELDING GAS: None required ‘TYPE OF CURRENT: Direct Current Electrode Negative (DCEN) STANDARD DIAMETERS: 0.030" (0.8 mm), 0.035" (0.9 mm), 0.045" (1.2 mm), 1/16" (1.6 mm), 0.088 (1.7 mm), 5/64" (2.0 mm) Re-DRYING: Not recommended STORAGE: Product should be stored in a dry, enclosed environment, and in its original intact packaging ‘TYPICAL WELD METAL CHEMIsTRY* (Chem Pad): Weld Motal Analysis (%) Fabshiold 218, ‘AWS Spec. Carbon (C) 0.28 030 ‘Manganese (Ma) 0.34 1.75 Silicon (Si) 0.5 0,60 Phosphorus (P) 0.008 0.08 ‘Sulphur (S) 0,003 0.03 ‘Aluminum (Al) 172 1.80 Note: AWS specification single values are maximums, TYPICAL MECHANICAL PROPERTIES" [Aged 48 Hrs. @200°F (93°C): Mechanical Tests Fabshield 218, ‘AWS Spec Tensile Strength ‘81,000 psi (627 MPa) | 70,000-85,000 psi (480-670 MPa) Yield Strength 62,000 psi (427 MPa) | _ 58,000 psi (390 MPa) Minimum Elongation % in 2" (50mm) 22% 20% Minimum TYPICAL CHARPY V-NoTCH IMPACT VALUES": Not applicable Seeordance wih te AWS Pressly deci ylabiy nce om any vance thereen Typical dat are howe obi wen ws an ne 15.20 specitenon Other tas and procedures may produce afer eau, No data be covarud a 8 recom ono nctigue nat contolod by Haber Srathers LLG Hobart Brothers LLC » 101 Trade Squate East» Troy, OH 45373 rt (00) 424-1543 » FX: 800-543-6007" wirabarbrethrs.com Fabshield® 21B Wice-Food Deposition | Contact Tip to Diameter Wotd ‘Speed Rate Work Distance Inches” (mm) Position | Amps Volts | infmin’ (m/min) | Ibsihe™(kgfhe) | Inches. (mm) 0.030 (0.8) All Position 2% 4 | 85 ia) | 03 Ot) | 12 1) 0.030 (0.8) All Position 12 | 46 | 228067) 3B 7) (13) 0.035 (0.9) All Position ss) a7 | 75a) | 18 (oa) | 2 (13) 0.035 (0.9) All Position 8 | 19 110 © 28) | 2108) | 213) 0.035 (0.9) All Position 120 | 20 | 0 | (41) 25 (12) | 1213) 0.045 (1.2) All Position 15) 15 | 10527) 14 (0.8) | 12 (13) 0.045 (12) All Position 430 16 | 125 G2) | 8 0B) | 213) 0.045 (12) All Position veo | 47 | 470043) 28 13) | 213) 0.045 (12) AlPositon | 200 18 © 195 = (50) | 35 (1) | 1213) W116 (1.6) All Position 160 | 17 | 70 (18) | 24 (10) | aia (13) 36 (18) AllPosition 190 | 48 | 100 © 5) 32 (15) | ae (19) 16 (18) Flat&Honzontal | 210 18 | 110) | 348) | Be 18) a6 (18) Flat Horizontal | 260 | 20 | 145° «= (37) | 4B 22) | 3 (19) 0.088 (17) AllPostion “5 | 18 | 50 (13) 18 (9) | 34 (19) 0.068 (1:7) All Position 1 | 18 | 6 (15) 23014) | ge (19) 0.068 {1:7} All Position 465 18 | 70) 48) | 27) 42) | ae 8) 0.063 (17) _ AlPosion | 260 | 18 | 100 (25) | 42 «© (18) | 34 (19) 0.068 (1:7) Flet&Horzontal | 255 21 | 111 = 28) | 52 23) | 3419) 0068 (1.7) Flat&Honzontal | 318 | 22 60 fat) | 74 Ga) | BM (19) 5164 (2.0) All Position 5) 16 | 65) a) | 262) | dp 564 (2.0) All Position 190 18 | 60 (45) | 2813) | 1B) 564 (20) _AllPosion | 220 18 | 70 © (18) | 35 (118) | 1 (28), 564 (20) Flat&Horzontal | 265 | 21 | 90 (23) | 47 «= (2t) | 1 a8), Bed (2.0) Flat &Horzontal | 315 | 22 | 124 =A) 712) | 1B) + Maintaining @ proper welding procedure - including pro-heat and interpass temperatures - may be critical ‘depending on the type and thickness of steel being welded. + Allposition includes; Flat, Horizontal, Vertical Up, Vertical Down, and Overhead. ‘STANDARD DIAMETERS AND PACKAGES: For a complete Ist of diameters and packaging, please contact Hobart Brothars at (800) 424-1543, or (937) 332-5188 for International Customer Service. —*—<«<{&&@*i—qqqqq—eETy Diameter | 24b.(0.9kq) | 104. (4.5kg) | 334. (15kg) Inches (mm)| "Spool ‘Spool Spool 0.030 (0.8)| s222t06-019 | s2z2106.022 | — 0.035 (0.9) | Szazi0e-019 | Szz2108-022 | S222108-029 oes af Suoaiiz-022 | S220112.028 a6 (18) 222119022 | $222119-029 oss i7)[ = $222128-028 sea 2o)[ = $222125-028 ‘CONFORMANCES AND APPROVALS: "AWS AS.20, E71T-11 + AWS A5.20M, E491T-11 “ASME SFA 5.20, E71T-11 + ABS, E71T-11 + CWS, E491T-11-H Caution: Consumers should be thoroughly familiar wit the safety precautions on the waming label posted in each shipment and inthe Amer- ‘an Natonal Standard 249.1, "Safety in Welding ana Cuing” published by the American Welaing Society, 8659 NW 35 St. #130, Doral, FL 33188-8572 (can also be downloaded online at wiv-aws.ora; OSHA Safety and Health Standards 29 CFR 1910 is avaliable ftom the US. Department of Labor, Washington, 0.C. 20210 Mata! Safety Data Shots onary Hobart Brothers LLC product maybe bind rom Habart Customer Sesic oat wn hobartorthers om, tears ron artic a Revision Date: 210817 Replaces 140824)

You might also like