Precise I efficient I reliable HIGH-QUALITY SURFACE APPLICATION WITH PRECISE CUT-OFF AND EDGE SHARPNESS The coating heads of the RobaCoat IT series Flexible Application Pattern are primarily designed for intermittent coating With the RobaCoat IT, individual nozzle seg- and particularly suitable for applications in the ments can be controlled separately, either via graphic, packaging, and converting industries. the integrated pattern control or directly via PLC. In combination with masks, application patterns Precise and Uniform Coating can be flexibly and cost-effectively adapted to The RobaCoat IT features uniform coating from the production requirements. Application pat- start to finish. Precise cut-off behavior and ex- terns are thus reproducible at any time. cellent edge sharpness are guaranteed even at high production speeds and fast switching Your Advantages times. • Uniform coating from start to finish with pre- cise cut-off and excellent edge sharpness RobaCoat IT with CoolTouch insulation Efficient Operation and Maintenance • High-quality surface application at constant The coating nozzle attached to the front of the and dynamic machine speed coating head can be rotated 180° for a flexible • Easy positioning relative to the substrate and installation. An optional mounting bracket with subsequent precise fine adjustment during scaled adjustment options ensures easy posi- ongoing production tioning relative to the substrate. Fine adjust- • Flexible adaptation of the application pattern ment is possible during ongoing production. The thanks to separate control of individual noz- CoolTouch insulation reduces heat radiation and zle segments and mask technology thus energy consumption. In addition, operator • Control via integrated pattern control or safety is increased. Thanks to high wear resis- directly via PLC Excellent application quality tance and integrated filter, the RobaCoat IT is • Particularly durable and low-maintenance particularly durable and low-maintenance.
TECHNICAL DATA Optional mounting bracket simplifies
Temperature range 20 to 200 °C positioning Adhesive pressure Max 100 bar Adhesive Thermoplastic adhesives Adhesive viscosity 2 000 to 10 000 mPas (1) Switching frequency 125 Hz (2) Application width (max.) RobaCoat IT 160: 160 mm / RobaCoat IT 240: 240 mm / RobaCoat IT 360: 360 mm / RobaCoat IT 440: 440 mm / RobaCoat IT 520: 520 mm Minimum coating time 4 ms (2) Minimum gap 4 ms (2) Supply voltage, heating element 230 VAC (EN60204), 50/60 Hz Supply voltage, solenoid valve 24 VDC, 6.5 W Installation situation independent of Air connection, solenoid valve 3 to 6 bar, cleaned and not oiled operating direction: Nozzle can be rotated 180° Air consumption Approx. 0.46 ml per feed element/cycle (6 bar) (1) Function test required if adhesives with higher viscosity are used. (2) Depending on adhesive, viscosity, temperature, frequency, pressure, air quality, and stroke. Continuous load maximum 125 Hz
Copyright Robatech AG 2021 I Subject to change
Robatech AG I Pilatusring 10 I 5630 Muri I Switzerland
Phone +41 56 675 77 00 I info@robatech.ch I www.robatech.com