2138 High Toot Road
= CANNON Se ie
ABB INSTRUMENT COMPANY
CERTIFICATE OF ANALYSIS
: ___CANNON® CERTIFIED VISCOSITY/DENSITY TESTING SERVICE
Sample 10; V5050 | Lot Number: 505114 Centitication/issue Date: 05/20/2015
Temperature Comet noe Density
[c. Be _mmiis(6St) | mPass(cP) | gicm*(gimt) [| _
2000 | 62.00 63.08 e203 0.9638
2500 | 7.00 4093 45.84 asses
3000 | e500 ast 280 964s
3500 | 9500 4074 2372 0.9804
4000 | 104.00 37.30 3628 0.9460
sooo | 12200 3186 2037 09371
0.00 | 175.00 2022 tea osito
120.00 | 248.00 1230 078 oeres
Customer Submitted Sample
Tested seukcattifodin the USA
This Carticae of Analysis shell not be reproduced, except in ul, without the welt approval of CANNON Instrument Company
(GENERAL INFORMATION
‘Sample Condition: The sample was received at CANNON instrument Company in good condition, unless otherwise noted or
‘communicated fo the customer.
Specific Testing Conducted: Tho received sample was tesied a8 spectfiod in the customer agreement with CANNON
Instrument Company.
Sampling Plan and Procedures: Aliquots for tosting were taken from the received sample In accordance with the test
procedures. Tha requested test procedures were followed with no additions, exclusions, of daviaone.
Validity of Test Results: The sample was tested as received and the results were valid al the time of testing. CANNON
Instrument Company makes no guaranteo as fo the period of valtity of tho data for the tested sample, since the materials
stabilly and shelf fe Is unknown. The test resus relate only to the provided sample and there is no representation that it
Appia to siilar materials or the remainder ofthe batch fram which il was taken,
sy ae
Certification Under
| | ‘Supervision of: “DB, Trowbridge, PRO 7
i j ALT, Mastropierto|
— — _ | MT. Zubler
| Tremutona he AA na LAC Mh aos dos rotiny|
carannppovat afte petecottsertoe” |
{ 1sO 9001 Page 1 0f2 :
agate by UL-00S #0002540 04
oo
IC Customer Sample Data Gi ezo0sDISCUSSION OF DATA’
Dorivatfon of Certified Values: CANNON Instrument Company cerifie that the kinematic viscosities were determined by
the Master Viscometer technique reported in the Journal of Research of tha National Bureau of Standards, (Vol, 52, No. 3,
March 1854, Research Paper 2470) using CANNON® Laboratory Standard viscometers. All omperature meaturements were
conducted according to The Intemational Temperature Scale of 1890 (ITS-00) using SPRTs with fixed point callraions, Tne
provided viscosity data are based upon the primary standard, water at 20 °C, wth a kinematic viscosily of 1.0034 mms and
‘an assigned accuracy of + 0.17% as por ISO 3688, See elso ASTM methods 02162, D445, D446, 02761, and ISO methods
3104 and 3108,
Kinematic viscosity (9) measurements in minis at temperatures of 20, 25, and 40 °C, and other temperatures as appropriate,
were generally made using Cannon-Ubbelchde Laboratory Standard viscomoters, at described in ASTM methods D445 and
446.
Density (p) in gicm® (g/mL) was generally determined through measurement in an osciating U-tube digital density meter or
‘modifi Bingham pycnometer. See ASTM method
fs 04052, 01480, and 01217.
Dynamic viscosity (p) in mPars was generally determined by measuring the kinematic viseosly and muttlying it by the
density a the same temperature [y= vp
Where appropriate, the kinematic viscosity, dynamic viscosity, or density at certain temperatures was determined through
Fogression of all measured data using industry standard. equations,
‘These equations include the linear or quacrato
\iscositydensity-tempereture equation derived from the ASTM viscosity-temperature charts for polroloum products as wall 03,
the NBS viscosty-temperature equation for petroleum products, See ASTM method 0341 and NBS equation,
Traceability: All data are traceable to inrinsic standards and National Institute of Standards and Technology (NIST)
calibration or calcuisied by ASTM or NIST methods. Kinematic viscosiy values are traceable to the viscosity of weter,
‘Temperature measurements were conducied with SPRTs that have NIST traceable fixed-point calibrations
‘eacesbilly statement is availabe for purchese from
‘CANNON Instrument Company,
‘A compete
Measurement Uncertainty: CANNON Instrument Company has determinad and reported the measurement uncertainty of is
‘aboratory capabilites. The expanded uncertain
Inieral are gs follows:
Kinomatic Viscosity (-40 °C to + 150°C)
jos of the
oralory mexsurements summarized at the 95% confidence
Expanded Uncertainty” Gajat Te
‘Range of Kinematic Viscosity,
46
to 45°C
0.36.
022
029)
32
oad
sly (6 °C to + 150°C)
er
Range of Donsily ~ Expanded Uncertaingy™ .
(glem’) a)
07-12 0.05
™ an edd wera U ie detained by aig Ws Combed Naa Ucar aARY Uy Coverage Tatar UF i hae wD
‘Soe NST Technical Note 1207, 1504 edtion,Guoines or valuing and Expressing (ne Uncortsny of MIST Measoroment Resi
‘The expanded uncertainty for dynamic viscosity can be considered equivalent to the expanded uncertainty for kinematic
viscosity since the uncertainty contribution of the
‘expanded ureertainty.
‘GANNON instrument Company
12139 High Toon Roa
‘State Cologe, PA 18803, USA
Technical Desir
Deputy Laberstory Technical Dectr:
Laboraton
‘814350 9000+ 600 6766252 + FAX B14 355.5007
Pionzre2{RTiCustom)
Director of Quality Assurance:
Page 2 of 2
cots
(DB. Trowbridge, PhD.
AT. Maskopier
MI. 2ubler
"Consul wane cnsoninsteument am fr edkitioal infomation
donsity measurement is deomed negligible in the calculation of the tla!
011(CERTIFIED CALIBRATION FLUID
BATCH # 605114 50>
FANN INSTRUMENT COMPANY
HOUSTON, TEXAS 7720
ea inter
a
oe eet
a — —
a
et at or
a
a oe os
SS — —
— =
oe =
=) — tae =a
oT =
oe z
=a ae =
24; — tat —wet =e
— se =
— — 3
3 oa
3 E
3a ce
a =
—— oa
2 — =
870 263 43.65 m3] 38.
—— =a
= a
3s —"|
sala Ee a
oa a ze
ae = =
ae a =
er = a
a : %
—te — Sa Ef oa
ae a =
et a a
a —
aa — —
2 — sa Se
“Toget scopy of hie sheet pease