Professional Documents
Culture Documents
SPB Kat
SPB Kat
Oglaend System offer a broad range of cable support systems for all applications, i.e., cabIe Iadders, cable trays,
junction box racks, tubing clamps, trefoil cleats, heating cables, control systems etc.
Any questions? Don't hesitate to contact us!
2
Innhold:
Rett til mindre
forandringer
forbeholdes.
Contents:
–––––––––––––––––––––––––––––––––––––
Subject to minor
changes
without notice.
Kabelbane SPBE-20
Cable tray SPBE-20
Lengde / length: 3m BELASTNINGSTABELL SPBE-20
Material thickness: HDG and AL: 2,0 mm LOADING TABLE SPBE-20
PG: 1,5 mm(50-200) 2 mm(300-600) Bredde Opphengsavstand/Support spacing
SS: 1,5 mm
På forespørsel / Width 0,5 m 1,0 m 1,5 m 2,0 m
On request: Epoxy coated and special treatment. 50 mm 372 kg/m 93 kg/m 33 kg/m* 14 kg/m*
100 mm 320 kg/m 81 kg/m 36 kg/m 16 kg/m*
150 mm 320 kg/m 81 kg/m 36 kg/m 17 kg/m*
200 mm 320 kg/m 81 kg/m 36 kg/m 18 kg/m*
I PG* og AL* med hull til selvborende skruer. 300 mm 320 kg/m 81 kg/m 36 kg/m 19 kg/m*
Hullrekke til selvborende skruer (se hullmønsterne under) 400 mm 320 kg/m 81 kg/m 36 kg/m 20 kg/m*
utføres kun i materialkvalitetene PG* og AL*. Materiale: 1,5mm SS.
In PG* and AL* with preslots for self tapping screws. Tabellen viser maks. tillatt last. Dimensjonerende er
Preslotted holes for self tapping screws (study the slot inkludert 2.0 sikkerhetsfaktor. Ved (*) er dimensjonerende
designs below) only in the material qualities PG* and last ved 1% nedbøyning av opphengsavstand.
AL*. Material: 1,5mm SS.
The table indicates the maximum allowable uniformly
distributed load. A safety factor of 2 is included.
Those marked with a (*) indicate the maximum permitted
load with a deflection of 1% of the support spacing.
L
SPBE-20
Best. nr. angir type + vangehøyde + banebredde.
Order no. state type + height of side piece + tray width.
35
20 PG* HDG SS AL* Weight
20
35 Type Art. no. Art. no. Art. no. Art. no. SS
SPBE-20-50 1372201 1371400 1371408 1372217 0,9 kg/m
20 20 SPBE-20-100 1372203 1371401 1371409 1372219 1,4 kg/m
25
25 Bredder / Widths: SPBE-20-150 1372205 1371402 1371410 1372221 1,9 kg/m
7 50 -100 -150 - 200 mm SPBE-20-200 1372207 1371403 1371411 1372223 2,4 kg/m
B
L SPBE-20
Best. nr. angir type + vangehøyde + banebredde.
Order no. state type + height of side piece + tray width.
Ø 3,6
35 PG* HDG SS AL* Weight
20
20 Type Art. no. Art. no. Art. no. Art. no. SS
35
SPBE-20-300 1372209 1371404 1371412 1372225 3,7 kg/m
SPBE-20-400 1372211 1371405 1371413 1372227 4,8 kg/m
20
25
20 SPBE-20-500 1372213 1371406 1371414 1372229 6,0 kg/m
25 Bredder / Widths: SPBE-20-600 1372215 1371407 1371415 1372231 6,9 kg/m
B 7 300 - 400 - 500 - 600 mm
4
Type SPBE-40
M
Kabelbane SPBE-40
Cable tray SPBE-40
Lengde / length: 3m BELASTNINGSTABELL SPBE-40
Material thickness: PG: 1,5 mm(50-200) 2 mm(300-400) LOADING TABLE SPBE-40
HDG: 1,5 mm(50-100) 2 mm(150-400) Bredde Opphengsavstand/Support spacing
SS: 1,5 mm
AL: 2,0 mm Width 1,0 m 1,5 m 2,0 m 2,5 m
På forespørsel / 50 mm 337 kg/m 150 kg/m 84 kg/m 54 kg/m
On request: Epoxy coated and special treatment. 100 mm 345 kg/m 153 kg/m 86 kg/m 55 kg/m
150 mm 320 kg/m 144 kg/m 80 kg/m 52 kg/m
200 mm 320 kg/m 144 kg/m 80 kg/m 51 kg/m
I PG* og AL* med hull til selvborende skruer. 300 mm 320 kg/m 144 kg/m 80 kg/m 51 kg/m
Hullrekke til selvborende skruer (se hullmønsterne under) 400 mm 320 kg/m 144 kg/m 80 kg/m 51 kg/m
utføres kun i materialkvalitetene PG* og AL*. Materiale: 1,5mm SS.
In PG* and AL* with preslots for self tapping screws. Tabellen viser maks. tillatt last.Dimensjonerende er
Preslotted holes for self tapping screws (study the slot inkludert 2.0 sikkerhetsfaktor.
designs below) only in the material qualities PG* and Material: 1,5mm SS.
AL*. The table indicates the maximum allowable uniformly
distributed load. A safety factor of 2 is included.
M SPBE-40
Best. nr. angir type + vangehøyde + banebredde.
Order no. state type + height of side piece + tray width.
HDG SS AL* Weight
35
02
0 Type Art. no. Art. no. Art. no. SS
2
35 SPBE-40-50 1371740 1371745 1372233 1,3 kg/m
SPBE-40-100 1371741 1371746 1372235 1,9 kg/m
40 SPBE-40-150 1371742 1371747 1372237 2,3 kg/m
20
25 SPBE-40-200 1371743 1371748 1372239 2,9 kg/m
25
SPBE-40-300 1302008 1371749 1372241 4,0 kg/m
B 7 Bredder / Widths: SPBE-40-400 1302009 1371750 1372243 5,0 kg/m
50 -100 -150 - 200 mm
5
Type SPB-RF
H
Kabelbane SPB-RF
Cable tray SPB-RF
Lengde / length: 3m BELASTNINGSTABELL SPB-RF: kg/m
Material thickness: AL: 2,0 mm LOADING TABLE SPB-RF: kg/m
HDG and PG: 1,5 mm (50-200) Bredde Opphengsavstand/Support spacing
2 mm (300-600)
SS: 1,5 mm Width 1,0 m 1,5 m 2,0 m 2,5 m 3,0 m
På forespørsel / 50 mm 531 236 133 85 59
On request: Epoxy coated and special treatment. 100 mm 729 324 182 117 66
150 mm 813 361 203 123 72
200 mm 725 320 180 115 75
300 mm 725 320 180 115 80
400 mm 725 320 180 115 79
500 mm 725 320 180 115 78
600 mm 725 320 180 115 78
Materiale: 1,5mm SS.
Tabellen viser maks. tillatt last.Dimensjonerende er
inkludert 2.0 sikkerhetsfaktor. Ved (*) er dimensjonerende
last ved 1% nedbøyning av opphengsavstand.
Material: 1,5mm SS.
The table indicates the maximum allowable uniformly
distributed load. A safety factor of 2 is included.
H Those marked with a (*) indicate the maximum permitted
load with a deflection of 1% of the support spacing.
35
20
35
20 SPB-RF
2 Best. nr. angir type + vangehøyde + banebredde.
x2
40 32 Order no. state type + height of side piece + tray width.
25
2 HDG SS AL* Weight
B 5
B = = 150 Bredder / Widths: Type Art. no. Art. no. Art. no. SS
100 7
B= 50 -100 -150 - 200 mm SPB-RF40-50 1302000 1371751 78637 1,7 kg/m
50
SPB-RF40-100 1302001 1371752 78638 2,2 kg/m
SPB-RF40-150 1302002 1371753 78639 2,6 kg/m
SPB-RF40-200 1302003 1371754 78640 3,3 kg/m
SPB-RF40-300 1302004 1371755 78641 4,4 kg/m
H SPB-RF40-400 1302005 1371756 78642 6,0 kg/m
SPB-RF40-500 1302006 1371757 78643 7,2 kg/m
75
SPB-RF40-600 1302007 1371758 78644 8,3 kg/m
75
5
51,
15
40
25
25
7 Bredder / Widths:
B 300 - 400 - 500 - 600 mm
6
Monteres uten behov for skjøtelask.
BEND / FLAT ELBOWS: Mounting without need for splice connector.
KRYSSFORBINDELSE SPB-20 på foresp. Best. nr. angir type + vangehøyde + banebredde.
CROSS-PIECE SPB-20 on request Order no. state type + flenge height + tray width.
M T-AVGREINING / TEE-PIECE
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
SPB-RF40 TE-50 1302065 1371785 79073 0,6 kg
6(9) SPB-R40 TE-100 1302066 1371786 78649 1,0 kg
M6x12 SPB-RF40 TE-150 1302067 1371787 79074 1,3 kg
SPB-RF40 TE-200 1302068 1371788 79075 1,9 kg
SPB-RF40 TE-300 1302069 1371789 79076 2,4 kg
MONTERINGSMÅL:
SPBE-40 SPB-RF40 TE-400 1302070 1371790 79077 3,9 kg
INSTALLATION MEASUREMENT: 147 mm + B SPB-RF
7
Bøyes til 30°- 45°- 90°
BEND FLEXI = All degrees in one adjustable elbow! eller ønsket vinkel!
Mønsterbeskyttet / Registered design Bend to 30°- 45°- 90°
or desired angle!
M SPBE-40 ELBOW FLEXI
SPB-RF Best. nr. angir type + banebredde.
Order no. state type + tray width.
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
4(6)
M6x12 SPB-EF-50 1302075 1302079 79639 0,5 kg
SPB-EF-100 1302076 1302080 79640 0,8 kg
Monteringseksempel: SPB-EF-150 1302077 1302081 79641 1,1 kg
SPB-EF-200 1302078 1302082 79642 1,5 kg
How to use:
Monteres uten behov for skjøtelask.
Mounting without need for splice connector.
FLEXI-VERTIKALBEND
FLEXI RISER
Best. nr. angir type + banebredde.
Bøyes til 30°- 45°- 90° eller ønsket vinkel!
L Order no. state type + tray width.
Bend to 30°- 45°- 90° or desired angle! HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
SPBE-20 FR-50 1302085 1302093 0,4 kg
Ca. 100 mm 300
4(6) SPBE-20 FR-100 1302086 1302094 0,5 kg
M6x12 SPBE-20 FR-150 1302087 1302095 0,8 kg
SPBE-20 FR-200 1302088 1302096 0,9 kg
20
SPBE-20 FR-300 1302089 1302097 1,1 kg
SPBE-20 FR-400 1302090 1302098 1,3 kg
B
SPBE-20 SPBE-20 FR-500 1302091 1302099 1,5 kg
SPBE-20 FR-600 1302092 1302100 1,8 kg
Monteres uten behov for skjøtelask.
FLEXI-vertikalbend tillater valgfri vinkeltilpasning ved håndbøying. Mounting without need for splice connector.
En fleksibel del erstatter alle inn- og utvendige vertikalbend.
FLEXI RISER allows free vertical angle forming simply by FASTE VERTIKALBEND på forespørsel.
bending with your hands. One flexible part replaces all in- and outside risers. FIXED RISERS on request.
8
FLEXI-VERTIKALBEND
FLEXI RISER
Monteringseksempler / How to use FLEXI-RISERS are developed to create whatev-
er angle needed to pass obstacles. Saves fitting
time. Eliminates cutting trays and other improvis-
FLEXI-RAISERE kan forme en hvilken som helst vinkel for ing during the installation work on the site.
å gå klar alle hindringer i en banetrase. Dette sparer
monteringstid ved å eliminere behovet for kutting av
baner og annen improvisering under monter- Unique flexibility simplifies installation whatever
ingsarbeidene. En unik fleksibilitet obstacle you encounter simply by bending.
forenkler montering forbi alle
hindringer ved enkel bøying.
For å oppnå en ekstra sterk To achieve a special strong construction fixing point for tray is
konstruksjon anbefales festepunkt for banen inntil Flexi- recommended close to the Flexi-Riser.
Riseren. Viktig ved bruk av risere i bredder over 200 mm. Important for risers in widths more than 200 mm.
20
SPB-KR 40 COMBI-RISER
Best. nr. angir type + vangehøyde + banebredde.
Order no. state type + flange height + tray width.
M HDG SS Weight
Type Art. no. Art. no. of tray
SPB CR-50 1302131 1302139 0,43 kg
SPB CR-100 1302132 1302140 0,45 kg
4 SPB CR-150 1302133 1302141 0,48 kg
M6x12 SPB CR-200 1302134 1302142 0,53 kg
SPB CR-300 1302135 1302143 0,58 kg
SPB CR-400 1302136 1302144 0,63 kg
SPB CR-500 1302137 1302145 0,68 kg
SPB CR-600 1302138 1302146 0,73 kg
9
M 24
SKJØTEPLATE alle 50-bredder
SPLICE CONNECTOR all 50 widths
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
2 60
150
SPB SC-50 1302166 1371812 77384 0,15 kg
35
M6x12
2 skjøtevinkler
M for hver baneskjøt. SKJØT
2 splice connectors
for each tray
for SPBE-40 + SPB-RF
splice. 270 SPLICE CONNECTOR
to SPBE-40 + SPB-RF
2(4)
M6x12 HDG SS AL Weight
32 mm 200 Type Art. no. Art. no. Art. no. SS
SPB SC-40 1371808 0,14 kg
43 mm SPBE-40 SC 1371806 77516 1372244 0,14 kg
In combination with
splice connector Z-REDUSERING for SPB-RF-40
M Z-REDUCER to SPB-RF-40
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
Centric SPB RE-50 86130 86133
2 reducing SPB RE-100 86131 86134
M6x12 SPB RE-200 86132 86135
M VERTIKALHENGSLE
7 x 30 280
40
HINGE VERTICAL
7 x 20
30 HDG SS AL Weight
50 Type Art. no. Art. no. Art. no. SS
30 160
2(4) 20
20 SPB HV 1302169 1371814 0,20 kg
M6x12
L
85
SKJØTEPLATE
200
SPLICE PLATE
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
4(8) SPB SC 85x200 1302167 1371813 79281 0,2 kg
M6x12
Anbefales brukt sammen med skjøtevinkler ved bredder
over 300 mm.
Use of splice connectors is recommended for widths
above 300 mm.
10
Festes med / Fix with: 1 bolt max Ø 12mm VEGGKONSOLL for LOE-, RZ-stiger og SPB- baner.
h: H: Type nr. angir stigebredde. Sikkerhetsfaktor 2.
M Material thickness: 6-8 33 130
Hull / Holes 12 x 25
39 130 CANTILEVER ARM for LOE, RZ ladders and SPB trays.
10 46 130 Type no. indicates ladder width. Safety factor 2.
52 150 HDG SS AL Maks last Weight
L
59 150 Type L Art. no. Art. no. Art. no. Max. load SS
H
Side 30 65 150
Page 30 S-M CA-35-100 1372689 1302442 1372552 350 kg 0,5 kg
S-M CA-35-200 1372690 1302443 1372584 250 kg 0,6 kg
S-M CA-35-300 1372691 1302444 1372585 200 kg 0,8 kg
50 S-M CA-35-400 1372692 1302445 1372586 175 kg 1,0 kg
S-M CA-35-500 1372693 1302446 1372587 150 kg 1,3 kg
L = Type length + 40mm S-M CA-35-600 1372694 1302447 1372588 125 kg 1,5 kg
5 mm material 11 x 20
M B OPPHENGSBØYLER for 100 mm bane
11 x 35
A A: CANTILEVER ARM for 100 mm tray
7 x 20 B: CHANNEL BRACKET for 100 mm tray
2 HDG SS AL Weight
M10x20 62
Type Art. no. Art. no. Art. no. SS
2 S-SPB CA-100 1302320 1302323 0,4 kg
M6x12 S-SPB CB-100 1302216 1302218 0,3 kg
40 40
M Hullstørrelse
Slot size
OPPHENGSBØYLE
11 x 35 mm
220
CHANNEL BRACKET TWISTED
7 x 20 mm HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
S-SPB CB-TW 1302172 1371818 0,35 kg
2
M10x20 Gir en ryddig, profesjonell installasjon uten
2 underliggende konsoller. Passer til skinne MK 48-3.
M6x12 Gives a clean and professional installation with no
descenders. Fits channel MK 48-3.
50
11x11
M OVERGANGSBRAKETT for bane under OE-stige
7x7
INTERFACE for tray to OE-ladder
97
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
1
M10x20 A-OE/SPB-RF-IF-97 85082 0,1 kg
1 177
M6x12 A-OE/SPB-RF-IF-177 60381 0,2 kg
11
M mm
SPB VEGGBRAKETT
20
15
30
SPB WALL SUPPORT BRACKET
Type angir type + banebredde.
30
Type state type + tray width.
H=45
HDG SS L: Weight
2(4) L Type Art. no. Art. no. Length SS
M6x12
30 SPB SB-50*
*) Til den minste banebredden monteres SPB SB-50/100 1302150 1371795 90 0,11 kg
veggbraketten på langs av banen. SPB SB-150/200 1302151 1371796 135 0,15 kg
De andre på tvers.
Bane Vegg
SPB SB-3/400 1302152 1371797 270 0,30 kg
*) On the smallest trays the wall bracket is
mounted lengthwise. The others crosswise. Tray Wall SPB SB-5/600 1302153 1371798 450 0,53 kg
mm 4
95 m
11
0m
M 20
5 2
24
OVERGANGS-BRAKETT Forenkler
15 installasjon av baner som sekundær-traséer. Passer til
OE-stiger og SPBE-baner for full utnyttelse av systemet.
40
mm mm
5
INTERFACE HORIZONTAL Simplifies
35 installationof trays used as secondary routes. Fits the OE-
35 15 ladder and SPBE-tray for full advantages of the system.
2 35
mm
M10x20 5 HDG SS AL Weight
2 Type Art. no. Art. no. Art. no. SS
M6x12
A-OE/SPB IF-HO 1302195 1302196 0,1 kg
M 75 OVERGANGS-BRAKETT
Overgang mellom bane og OE stige.
60
INTERFACE VERTICAL
Transition from tray to OE ladder.
2
M10x20 90
HDG SS AL Weight
2 Type Art. no. Art. no. Art. no. SS
M6x12 A-OE/SPB IF-VE 1302186 1371847 0,1 kg
M
For beskyttelse av kablene, når de går
over banekanten. AVGANGSBRAKETT FOR KABEL
For use as drop out where the
cables go directly out of
EXIT PLATE Drop out for cable
the tray. HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
2 1140
40 A-SPBE-20 EX 1302158 1302160 0,11 kg
M6x12 A-SPBE-40 EX 1302159 1302161 0,15 kg
100
38
M FESTEPLATE for koblingsboks
7 x 25
SOCKET BRACKET for junction box
166
HDG SS AL Weight
Type Art. no. Art. no. Art. no. S
2
M6x12 A-SPB SO 1372055 1302156 1372968 0,25 kg
12
Monteres under kabelbanen
M for feste av lysarmatur. ARMATURFESTE
For mounting under the cable tray
for lighting installation. LIGHT BRACKET
HDG SS AL Weight
Type Art. no. Art. no. Art. no. SS
1
M6x12 A-SPB LB-Z 1372818 1371857 0,75 kg
250
4 Equipment fixes with self tapping screws.
M6x12
10 x 10
HDG SS SS
Type Art. no.: Art. no.: Weight
A-SPB SO-100 1302688 1302689 0,8 kg
80
100
På forespørsel produserer vi din egen utstyrsbrakett Ask for your own equipment bracket with the exact
med nøyaktige festehull tilpasset dine deler. combination of fixing holes to fit your items.
KANTLIST "Volvo-list"
EDGE PROTECTOR
Oppgi best. nr. og antall meter.
State order no. and length in meters.
Type Art. no.
A-SPB EP-PG 1302165
A-SPB EP-SS* 1302164
*) Use on SS-tray
M
Tilpasses inn/utvendig ved bøying
Adapted to in/outside
SPBE-40 DEKSEL FLEXI-VERTIKALBEND
by bending SPB-RF COVER FLEXI RISER
HDG SS AL Weight
Type (+width) Art. no. Art. no. Art. no. SS
SPB FR-CO-50 82653 81887 0,3 kg
SPB FR-CO-100 82654 81888 0,5 kg
SPB FR-CO-150 82655 81889 0,7 kg
SPB FR-CO-200 82656 81890 1,0 kg
SPB FR-CO-300 82657 82659 1,4 kg
SPB FR-CO-400 82658 82660 1,9 kg
SPB FR-CO-500 82661 82663 2,3 kg
SPB FR-CO-600 82662 82664 2,7 kg
14
NB! Alle kabel baner og stiger er tilpasset tubing.
Til store tubing installasjoner offshore , anbefales OE stigen.
NB! All cable trays and ladders are suitable for tubing. For comprehensive
INSTRUMENTERINGSUTSTYR
tubing installations offshore, we recommend the OE ladder. EQUIPMENT FOR TUBING
M
TUBING VINKEL FOR SPBE-40
TUBING ANGLE FOR SPBE-40
HDG SS AL Weight
2(4) Type Art. no. Art. no. Art. no. SS
M6x12 SPBE40 AS-HO 1302168 1371815 0,13 kg
TAG 12 30
185 TAG PLATE
M Standard plate til TAG-Nr. for baner og stiger. 1,5 mm.
Stdr. support plate for TAG-No. on trays and ladders. 1,5 mm.
HDG SS AL Weight
7x7 7x7 Type Art. no. Art. no. Art. no. SS
11 x 11 61
11 x 11
2 TAG 12 1302162 1302163 0,1 kg
7 x 15
M6x12 TAG 14 60379 0,1 kg
56 Be om eget tagplateark som viser varianter.
TAG 14 Ask for spesial tag plate sheet showing the different types.
38
120
JORDINGSLASK
EARTH LINK “Jumpers”
Art. L Ø Dim
Type no. Length mm Screw mm2
A-M EL-100/6-4 85813 100 6 4
A-M EL-100/6-6 85814 100 6 6
Ø A-M EL-100/10-10 85815 100 10 10
L A-M EL-300/10-10 85816 300 10 10
A-M EL-100/10-16 85817 100 10 16
A-M EL-300/10-16 85818 300 10 16
Andre dimensjoner på forespørsel.
Other dimensions on request.
15
For 6-12mm For 14 - 25 mm
1/4’’-1/2’’ pipes ETIN tubing clamp 5/8’’- 1’’ pipes
Single, standard ETIN clamp The clamp is made of a stainless Just clip to tray and
..
supporting unit. Insert the bolt through the hole. This locks 1’’
the clamps to the tray. 20 mm 3/4’’
It pays to use the ETIN from the very first clip! THE ONLY TOOL YOU NEED
....
Compare the ETIN clamp with all competing
IS A 10 MM SPANNER
clamps on the market. For maximum use of 100 mm
ETIN is developed for better project economics. SPBE-tray the clamps are
alternately fixed, always with
The largest jobs give you the greatest savings. self-locking bolt in the
Front-mounting is only one of the advantages. centre slots.
11 mm
17
HUSK: Skruer er inkludert!
REMEMBER: Screws are included!
Stdr. forpakn. PG. HDG SS
SKRUER / SCREWS TYPE STD. packs Art. no. Art. no. Art. no.
M 6 x 12 * Type: S-M LS-NU-M6x12 200 1372750 1371981
LÅSESKRUER M 6 x 16 * Type: S-M LS-NU-M6x16 200 84487
LOCKING SCREWS M 6 x 20 * Type: S-M LS-NU-M6x20 100 1371982
*) Low m/linsehode og flensmutter M 6 x 30 Type: S-M LS-NU-M6x30 100 1372749 1371361
With pan head and flange nuts M10 x 20 * Type: S-M LS-NU-M10x20 100 1371983
M10 x 25 * Type: S-M LS-NU-M10x25 100 1371980
Self-Lock only in SS M10 x 50 Type: S-M LS-NU-M10x50 50 1371589 1371362
M 6 x 12 * DIN 603 Type: S-M LS-M6x12 200 1372167 1372161
LÅSESKRUER M 6 x 16 * DIN 603 Type: S-M LS-M6x16 200 84493
LOCKING SCREWS M 6 x 25 DIN 603 Type: S-M LS-M6x25 200 1372169 1372162
M 6 x 50 DIN 603 Type: S-M LS-M6x50 200 1371360 85520
*) Low M10 x 20 * DIN 603 Type: S-M LS-M10x20 200 1372163
M10 x 25 * DIN 603 Type: S-M LS-M10x25 200 1372765 84352
M10 x 30 DIN 603 Type: S-M LS-M10x30 50 86008 89821
M10 x 35 DIN 603 Type: S-M LS-M10x35 100 83497 82709
High M10 x 50 DIN 603 Type: S-M LS-M10x50 50 89822
M10 x 70 DIN 603 Type: S-M LS-M10x70 50 81396
M 6 x 12 DIN 933 Type: S-M HE-M6x12 500 1372780
SEKSKANTSKRUER M 6 x 16 DIN 933 Type: S-M HE-M6x16 200 1372171 1371318
HEXAGONAL SCREWS M 6 x 20 DIN 933 Type: S-M HE-M6x20 200 1372172 1371319
M 6 x 30 DIN 933 Type: S-M HE-M6x30 200 1371320
M 8 x 20 DIN 933 Type: S-M HE-M8x20 200 1371301 1371321
M 8 x 25 DIN 933 Type: S-M HE-M8x25 200 1371302 1371322
Lengre utgaver M 8 x 30 DIN 933 Type: S-M HE-M8x30 200 1371303 1371323
leveres i DIN 931 M10 x 16 DIN 933 Type: S-M HE-M10x16 100 1372178 1371324
delgjenget. M10 x 20 DIN 933 Type: S-M HE-M10x20 100 1371304 1371325
M10 x 25 DIN 933 Type: S-M HE-M10x25 100 1371305 1371326
Other lengths M10 x 30 DIN 933 Type: S-M HE-M10x30 100 1371306 1371327
in DIN 931 M10 x 35 DIN 933 Type: S-M HE-M10x35 100 1371307 1371328
M10 x 45 DIN 933 Type: S-M HE-M10x45 100 1371308 1371329
partly thread. M10 x 50 DIN 933 Type: S-M HE-M10x50 100 1371309 1371330
M10 x 55 DIN 933 Type: S-M HE-M10x55 50 1371310 1371331
M12 x 25 DIN 933 Type: S-M HE-M12x25 100 1371311 1371332
M12 x 35 DIN 933 Type: S-M HE-M12x35 100 1371312 1371333
M12 x 45 DIN 933 Type: S-M HE-M12x45 50 1371313 1371334
Spisset / Tapered M10 x 40 DIN 933 Type: S-M HE-M10x40 100 1371314 1371335
M 6 x 16 DIN 7985 Type: S-M PS-M6x16 200 1372164 1372156
LINSESKRUER M 6 x 20 DIN 7985 Type: S-M PS-M6x20 200 1372842 1372157
PAN HEAD SCREWS M 6 x 25 DIN 7985 Type: S-M PS-M6x25 200 84954 1372158
With Torx T30 M 6 x 30 DIN 7985 Type: S-M PS-M6x30 200 1372166 1372159
M 6 x 40 DIN 7985 Type: S-M PS-M6x40 100 1372168 1372160
BITS for torx T30 conical Bits conical Torx T30 1371417
FLENSMUTTERE 6 mm DIN 6923 Type: S-M NU-FL-M6 200 1372843 1371971*
FLANGE NUTS 8 mm DIN 6923 Type: S-M NU-FL-M8 200 1372831 1371972*
10 mm DIN 6923 Type: S-M NU-FL-M10 200 1372832 1372180 1371973*
*) Self-Lock only in SS M6, M8, M10 12 mm DIN 6923 Type: S-M NU-FL-M12 200 1371343
MUTTERE M 6 x 10 DIN 934 Type: S-M NU-M6 1000 1372844 1372781
M 8 x 13 DIN 934 Type: S-M NU-M8 500 1372176 1371340
NUTS M10 x 17 DIN 934 Type: S-M NU-M10 500 1372845 1371341
M12 x 19 DIN 934 Type: S-M NU-M12 200 1372179 1371342
5x30,5x1,5 Type: S-M WA-5x30,5x1,5 1000 84394
SKIVER 6x12x1,6 DIN 125 Type: S-M WA-6,4x12x1,6 1000 1372782
WASHERS 6x18x1,6 DIN 125 Type: S-M WA-6,4x18x1,6 1000 1372175 1371349
OD Type codes: 6x25x1,5 Type: S-M WA-6x25x1,5 200 1372848 1371350
Ø t= 8x16x1,6 DIN 125 Type: S-M WA-8,4x16x1,6 1000 1372849 1371345 1371351
8x40,3x1,5 Type: S-M WA-8x40,3x1,5 1000 85345
10,5x20x2 DIN 125 Type: S-M WA-10,5x20x2 1000 1372850 1371352
10,5 x 20 x 2
12x24x2,5 DIN 125 Type: S-M WA-13x24x2,5 500 1371346 1371353
11x32x1 Type: S-M WA-11x32x1 500 1371347 1371354
7x35x2 Type: S-M WA-7x35x2 500 1371594
10x(29x33)x3 Type: S-M WA-10x(29x33)x3 500 84110
M6 DIN 6798 Type: S-M SW-M6 200 1372852 1371355
STJERNESKIVER M8 DIN 6798 Type: S-M SW-M8 100 1371356
STAR WASHERS M10 DIN 6798 Type: S-M SW-M10 100 1372854 1371357
M12 DIN 6798 Type: S-M SW-M12 100 1371359 1371358
EKSPANSJONSBOLTER M 6 x 40 Type: S-M AC-6x40 100 1372767
M 6 x 52 Type: S-M AC-6x52 100 1371368
ANCHOR CONCRETE
M 8 x 50 Type: S-M AC-8x50 100 1372768 1371369
Kvaliteter: V.G. = 5,8 M 8 x 60 Type: S-M AC-8x60 100 1371364
Qualities: S.S. = A4-70 M10 x 60 Type: S-M AC-10x60 50 1372769 1371365 1371370
P.G. = 5,8 M10 x 85 Type: S-M AC-10x85 50 1371366 1371371
M12 x 110 Type: S-M AC-12x110 50 89823
ØS SPLIT BOLT for stål M8-Split Type: S-M EB-M8 50 89383
EXPANSION BOLT for steel
SELVBORENDE SKRUER i 100-pakn. / SELF-TAPPING SCREWS in packs of 100
Inntil 3 mm stålplate / 4,2 x 14mm Type: 34-PH 100 1372820
Up to 3 mm steelplate 4,2 x 25mm Type: 36-PH 100 1372821
SELVBORENDE SYREFASTE SKRUER / SELF-TAPPING STAINLESS STEEL SCREWS
For opptil 2,5mm tykkelse 4,8 x 13 mm MARUTEX M4,8x13 1371373
For up to 2,5mm thickness 4,8 x 25 mm Marutex M4,8x25 1371374
Bits for Marutex Bits 1371375
Maks. Tiltreknings moment / Max Torque: M6 = 7Nm, M8 = 17Nm, M10 = 33Nm, M12 = 62Nm
18 PG = 4-7 my zink. HDG = 40-70 my zink. SS = A4-70 (Hex = A4-80)
SALGSKONTORER - ADRESSER
LOCATIONS - ADDRESSES
HOLDING COMPANY/KONSERN UK Brunei Italy
Øglænd lndustrier AS Oglaend System UK Ltd. Shinba Integrated Engineering services Chemit Srl.
P.O. Box 133 Tel.: + 44 121 552 9662 Tel.: + 673 333-1489 Tel.: + 390 39 79 62 72
N-4358 Kleppe Fax: + 44 121 544 6627 Fax: + 675 333-6333 Fax: + 390 39 79 43 70
Tel.: + 47 51 78 81 00 Email: oglaend.system@oglsys.co.uk Email: info@ies.com.bn Email: sales.electrical@chemit.it
Fax: + 47 51 78 81 60 www.oglaend-system.com Web: www.chemit.it
EmaIl: oglind@oglsys.no Canada
www.oglaend-system.com Korea Apel/CSA Enterprises Malaysia
Oglaend System Korea Co Ltd Tel.: + 1 902 450 5647 Esteem Link (Letrik Utama) SND BHD
SUBSIDIARY/DATTERSELSKAP Tel.: + 82 518 320 761 Fax: + 1 902 450 5286 Tel.: + 60 6 85 417 230, 430 580
Norway Fax: + 82 518 320 762 Email: urquhart@csarep.com Fax: + 60 6 85 414 352
Øglænd System AS Emall: oglaend@oglaend-system.co.kr www.csarep.com Email: ellusb@tm.net.my
Head office/factory
P.O. Box 133 SALGSKONTORER/SALES OFFICES Denmark Russia (St. Petersburg)
N-4358 Kleppe Norway Solar AS Newtech Ltd
Tel.: + 47 51 78 81 00 Øglænd System AS, Oslo division: Tel.: + 45 76 92 61 50 Tel: +7 812 9164829
Fax: + 47 51 78 81 60 Tel.:+ 47 22 25 15 10 Fax: + 45 76 92 61 60 Fax: 7 812 2301762
Fax sales office: + 47 51 78 81 61 Fax: + 47 22 25 25 21 www.solar.com Email: very@newtech.sp.ru
Email: oglaend@oglsys.no www.oglaend-system.com
www.oglaend-system.com Dubai Scotland
Øglænd System AS, Ålesund divisjon: Sentor Hydrasun Ltd.
Dubai (Middle East) Tel.: + 47 70 19 09 50 Tel.: + 971 6 572 8485 Tel.: + 44 1224 61 86 18
Oglaend Industries Middle East Fax: + 47 70 19 09 51 Fax: + 971 6 572 8486 Fax: + 44 1224 61 87 01
Tel.: + 971 4 3415986 www.oglaend-system.com Email: sentor@emirates.net.ae www.hydrasun.com
Fax: + 971 4 3415987
Mobile: + 971 50 55 86 183 Øglænd System AS, Trondheim division: Finland Thailand
Email: oglaendsys_me@xsmail.com Tel.: + 47 73 80 99 70 Elmarino - Shipping OY Spirit Intertrade Co LTD
www.oglaend-system.com Fax: + 47 73 80 99 77 Tel.: + 358 22 54 61 00 Tel: + 66 2 316 5692-4
www.oglaend-system.com Fax: + 358 22 54 62 76 Fax: + 66 2 316 5714
The Netherlands Email: dilok@spirit.in.th
Oglaend System BV AGENTER - FORHANDLERER/ Germany
Tel.: + 31 1804 14 204 AGENTS - DlSTRlBUTORS Naval Logistics GmbH USA (Texas and Louisiana)
Fax: + 31 1804 19 395 Abu Dabi Tel.: + 49 61 83 92 06 Source lEC
Emall: info@oglaend-system.nl Proserv Albadie LLC Fax: + 49 61 83 92 15 Tel.: + 1 281 540 9800
www.oglaend-system.com Tel.: + 971 26 27 73 70 Email: theessen@naval-logistics.com Fax: + 1 281 540 9802
Fax: + 971 29 27 79 72 www.naval@logistics.com Email: bob.johnson@sourceiec.com
Singapore (South East Asien) Email: proserv@emirates.net.ae www.sourceiec.com
Oglaend System Singapore Pte. Ltd. www.proserv.no Iceland
Tel.: + 65 67 48 82 78 Smith & Norland Qatar
Fax: + 65 67 48 86 15 Australia Tel.: + 354 52 03 000 Petrofac Qatar
Email: oglaend.system@pacific.net.sg J. T. Day Pty. Ltd. Fax: + 354 52 03 011 Tel.: + 974 4353 336
www.oglaend-system.com Tel.: + 61 8 93 45 33 88 Email: sminor@sminor.is Fax: + 974 4554 448
Fax: + 61 8 93 45 30 68 www.sminor.is Email: pfacq@qatar.net.qa
Sweden Email: enquiries@jtday.com.au www.petrofac.com
Ögländ System AB www.jtday.com.au lndonesia
Tel.: + 46 (0)46 25 81 40 PT. Multi Tarex MuIia Vietnam
Fax: + 46 (0)46 25 81 45 Brazil Tel.: + 62 21 3983 5337 MT Corporatin
Email: oglaend-system@oglsys.se M.O.TECH do Brazil Fax: + 62 21 3983 5340 Tel: + 848 821 0373
www.oglaend-system.com Tel.: + 55 21 2532 2101 Email: agus@multitarex.co.id Fax: + 848 821 0358
Fax: + 55 21 2517 2437 www.multitarex.com Email: mail@mt-co.com
Email: motech@motech.com.br
www.motech.com.br
*• •
•
•X
•X
X
•
This has been our motto since the company was founded in 1977. By living up
to the motto we have become the market leader in our field – worldwide.
Oglaend System´s goal is to develope systems that are better, simpler and more
economic overall.
Konsern/Holding company:
Øglænd Industrier AS,
P.O. box 133, N-4358 Kleppe,
Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60
Datterselskap/Subsidiary:
Øglænd System AS
Hovedkontor fabrikk/Head Office factory:
P.O. box 133, N-4358 Kleppe,
Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60
1.