Professional Documents
Culture Documents
com/gb/products/3005073
Feed-through terminal block, Connection method: Screw connection, Cross section: 0.5 mm² - 16 mm²,
AWG: 20 - 6, Width: 10.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15, NS 32
Key commercial data
Packing unit 50 pc
Minimum order quantity 50 pc
GTIN
Technical data
General
Number of levels 1
Number of connections 2
Color gray
Insulating material PA
Inflammability class according to UL 94 V0
Maximum load current 76 A (with 16 mm² conductor cross section)
Rated surge voltage 8 kV
Pollution degree 3
Surge voltage category III
Insulating material group I
04/06/2015 Page 1 / 23
https://www.phoenixcontact.com/gb/products/3005073
Dimensions
Width 10.2 mm
End cover width 1.8 mm
Length 42.5 mm
Height NS 35/7,5 47.3 mm
Height NS 35/15 54.8 mm
Height NS 32 52.3 mm
Connection data
Connection in acc. with standard IEC 60947-7-1
Connection method Screw connection
Conductor cross section solid min. 0.5 mm²
Conductor cross section solid max. 16 mm²
Conductor cross section AWG min. 20
Conductor cross section AWG max. 6
Conductor cross section flexible min. 0.5 mm²
Conductor cross section flexible max. 10 mm²
Min. AWG conductor cross section, flexible 20
Max. AWG conductor cross section, flexible 8
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
Cross section with insertion bridge, solid max. 10 mm²
Cross section with insertion bridge, stranded max. 10 mm²
2 conductors with same cross section, solid min. 0.5 mm²
04/06/2015 Page 3 / 23
https://www.phoenixcontact.com/gb/products/3005073
Classifications
eCl@ss
ETIM
04/06/2015 Page 4 / 23
https://www.phoenixcontact.com/gb/products/3005073
Approvals
Approvals
Approvals
CSA / UL Recognized / KEMA-KEUR / cUL Recognized / LR / GL / DNV / RS / PRS / KR / NK / CCA / EAC / EAC / cULus Recognized
Ex Approvals
Approvals submitted
Approval details
CSA
B C
mm²/AWG/kcmil 24-6 24-6
Nominal current IN 65 A 65 A
Nominal voltage UN 600 V 600 V
UL Recognized
mm²/AWG/kcmil 24-6
Nominal current IN 65 A
Nominal voltage UN 600 V
04/06/2015 Page 5 / 23
https://www.phoenixcontact.com/gb/products/3005073
KEMA-KEUR
mm²/AWG/kcmil 10
Nominal current IN 57 A
Nominal voltage UN 800 V
cUL Recognized
mm²/AWG/kcmil 24-6
Nominal current IN 65 A
Nominal voltage UN 600 V
LR
mm²/AWG/kcmil 10
Nominal current IN 57 A
Nominal voltage UN 800 V
GL
mm²/AWG/kcmil 10
Nominal current IN 57 A
Nominal voltage UN 690 V
DNV
RS
PRS
KR
NK
04/06/2015 Page 6 / 23
https://www.phoenixcontact.com/gb/products/3005073
CCA
mm²/AWG/kcmil 10
Nominal voltage UN 800 V
EAC
EAC
cULus Recognized
Accessories
Accessories
End block
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
04/06/2015 Page 7 / 23
https://www.phoenixcontact.com/gb/products/3005073
End clamp - E/UK - 1201442
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
Insertion bridge
04/06/2015 Page 8 / 23
https://www.phoenixcontact.com/gb/products/3005073
Insulating sleeve
04/06/2015 Page 9 / 23
https://www.phoenixcontact.com/gb/products/3005073
04/06/2015 Page 10 / 23
https://www.phoenixcontact.com/gb/products/3005073
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 -
10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm,
Lettering field: 10.15 x 10.5 mm
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 -
10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm,
Lettering field: 10.15 x 10.5 mm
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2,
etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x
10.5 mm
04/06/2015 Page 11 / 23
https://www.phoenixcontact.com/gb/products/3005073
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3,
N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5
mm
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: U, V, W, N, GND, U, V, W,
N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5
mm
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm
Mounting rail
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
04/06/2015 Page 12 / 23
https://www.phoenixcontact.com/gb/products/3005073
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
04/06/2015 Page 13 / 23
https://www.phoenixcontact.com/gb/products/3005073
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
04/06/2015 Page 14 / 23
https://www.phoenixcontact.com/gb/products/3005073
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm,
length 2000 mm
04/06/2015 Page 15 / 23
https://www.phoenixcontact.com/gb/products/3005073
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m
Partition plate
04/06/2015 Page 16 / 23
https://www.phoenixcontact.com/gb/products/3005073
Separating plate - TS-K - 1302215
Partition plate - ATP-UK - 3003224
Screw bridge
04/06/2015 Page 17 / 23
https://www.phoenixcontact.com/gb/products/3005073
04/06/2015 Page 18 / 23
https://www.phoenixcontact.com/gb/products/3005073
Jumper - ISSBI 10-10 - 0301521
Short-circuit connector
Switching jumper
Terminal marking
Marker card - SBS10:UNBEDRUCKT - 1007248
Marker card, Card, white, unlabeled, can be labeled with: Plotter, Perforated, Mounting type: Snap into tall marker
groove, Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 6 x 10.1 mm
04/06/2015 Page 19 / 23
https://www.phoenixcontact.com/gb/products/3005073
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove,
for terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED,
Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for terminal block width: 10.2
mm, Lettering field: 8.9 x 9.6 mm
Test plugs - PS-MT - 0311647
Test plugs
Test socket
04/06/2015 Page 20 / 23
https://www.phoenixcontact.com/gb/products/3005073
04/06/2015 Page 21 / 23
https://www.phoenixcontact.com/gb/products/3005073
Warning label, Plate, yellow, labeled: Lightning flash and warning in English, Mounting type: Screws, rivets, for
terminal block width: 10 mm
04/06/2015 Page 22 / 23
https://www.phoenixcontact.com/gb/products/3005073
Warning label, Plate, yellow, labeled: Lightning flash and warning in English, Mounting type: Screws, rivets, for
terminal block width: 10 mm
Drawings
Circuit diagram
04/06/2015 Page 23 / 23