Professional Documents
Culture Documents
SKB A7 F38 F7DA Heavy Duty Roller Shutters User Manual - 210417 - 005
SKB A7 F38 F7DA Heavy Duty Roller Shutters User Manual - 210417 - 005
To maintain cleanliness of shutter slats, wipe surface of shutter slats with a soft material (eg. Clean cotton cloth) every month
(or depending on condition or surroundings, more/less frequent cleaning is required). It is strongly advised to not use any strong
detergent / solvent and hard material to be in contact of the shutter slats.
It is strongly advised that user(s) shall not attempt to dismantle or perform troubleshooting on the counter-balance mechanism
(for Fold-Up Doors and Roller Shutters with 30s closing requirements) without an experienced technician or the manufacturer.
Improper installation and dismantling may risk public safety causing unwanted injuries.
Note: Routine checks for an interval of 6 months are advised to be performed for each motorised roller
shutter.
1. Limit switches
2. Wiring connections
3. Check if any part damage or worn out need to be replaced.
4. Apply light grease on motor sprocket gear chain every 6 months for smooth operation.