You are on page 1of 5

OS 5.

1 Release Notes
Restrictions

Usage of vehicle communication interfaces VAS 6154 and VAS 6154A (once available)

Both interface types can be used under Windows 7 and Windows 10.
USB connectivity is recommended.

Usage of vehicle communication interfaces VAS 5054, VAS 5054A, and VAS 5055

These interface types can be used under Windows 7.


Please note that Windows 7 support will end on December 31st, 2019.
Service
Implemented user requirements in version 5.1

In this section, the implemented user requirements of version 5.1


are listed with their respective CCB-DS ID and original requirement title.

ODIS Service version 5.1.2:

CCB_DS_1212 For a connected vehicle, ODIS Service must always show the battery voltage from the vehicle in
the start mask.
CCB_DS_1592 ODIS service must switch off checking ODX SCALE CONSTRAINTS for reading and writring
services.
CCB_DS_2181 When using the VAS6154A, ODIS Service and ODIS Engineering must support the baud rate
switchover (LinkControl).
CCB_DS_2187 The last diagnostic protocol as HTML and the fbck file must be included in the extended logs.

ODIS Service version 5.1.4:

CCB_DS_2082 Disable energy saving mode in the default configuration of the diagnostics interface VAS
6154.
CCB_DS_2112 The WLAN VCI VAS6154 must support authentication with intermediate certificates.
CCB_DS_2129 For the initial setup of the VAS6154 a Setup Wizard should be created in ODIS.
CCB_DS_2228 When calling the ElectronicsRepairService in the XML structure according to WSDL, ODIS must
Service

comply with certain element sequences and remove empty elements.


CCB_DS_2255 ODIS should use the LL_AllOBDSyste for VW OBD communication.
Defect resolution in version 5.1

In this section, the resolved defects of version 5.1


are listed with their respective Defect ID and original defect title.

ODIS Service version 5.1.2:

#19317 ODIS S 4.1.3: End of PDU Field does not work in the request from the ODIS C
#19949 ComPrimitive depends on DoIP NACK 0x05
#19983 OS 5.0.2 CCB-DS 1212 battery voltage is displayed incorrectly with VAS 5054 (flat rate 12V)
#20046 Grammatical error in the connection test window
#20061 The display in the lower status bar on the right does not match the current ODIS state
#20072 OS 5.0.3 Autosave protocol is not sent to the BackEnd (DISS)
#20089 OS 5.1.1 unclear error message. Inconsistent diagnosis data
#20095 ODIS 5.1.1 GUI in the start mask no correct representation
#20108 OS 5.0.5 Diagnostic log is not sent Error message ODS9215E
#20109 OS 5.0.3 at the start of self-diagnosis several times an error ODS4009E occurred in the field
#20110 The VCI trace information in the support request is missing
#20112 Error reading the license file: Invalid certifacate data
#20115 Restart message after Postsetup appears despite restart after Singlesetup

ODIS Service version 5.1.3:

#20143 Time units do not fit in the dignose protocol.


Service

#20154 OS 5.1.2 Time in the diagnostic protocol does not match to the spend time


#20157 Error message after termination of diagnosis and logoff to group systems
#20176 Crafter: Complete deletion of the event memory on diagnostic exit

ODIS Service version 5.1.4:

#19860 ODIS S 5.0 - changed behavior when interrupt VCI connection


#19944 Flash on Wi‐Fi and DoIP does not work
#20132 Measured values KWP gearbox DQ250 (02E) are incorrect or incomplete (value not
available).
#20138 DoIP: Flash abort on large Flash files using the D-PDU API 16.0.0
#20141 [OE-3] [DoIP] DiagnosticPowerMode query will not be repeated on late response after
ResponsePending
#20173 [Crafter_OS] OS 5.1.2 - VIN is not recognized automatically
#20174 [Crafter_OS] OS 5.1.2 - 91 Motor ECU KWP is not recognized during diagnosis entry
#20220 ODIS service: The error message "The automatic SFD activation has failed" appears on vehicles
without SFD
#20226 OS 5.0.6 SFD step 1 automatic activation does not work for jobs
#20230 The new Audi A3 (MQB_37w) VIN could not be readed
#20231 [OE-9] [ICAS] After reconnecting the TCP connection in the boot loader and receiving the positive
response to the session change, ODIS stops sending data.
#20258 Gateway flashing over DoIP does not work at the Audi A5 USA model
#20260 Missing time values for OS 5.1.3 in the diagnostics entry without GMD

ODIS Service version 5.1.5:

#20731 ODIS S: 5.1.4 Response from diagnosis jobs is not processed correctly
Supported vehicles with version 5.1

Approved AUDI vehicles


• All AUDI vehicles are supported.

Approved Volkswagen vehicles


• All Volkswagen vehicles are supported.

Approved Volkswagen Nutzfahrzeuge vehicles


• All Volkswagen Nutzfahrzeuge vehicles are supported.

Approved Seat vehicles


• All Seat vehicles are supported.

Approved Skoda vehicles


• All Skoda vehicles are supported.

Approved Bentley vehicles


• All Bentley vehicles are supported.

Approved Lamborghini vehicles


• The following Lamborghini vehicles are supported:
Gallardo from MY09-MY14 (only immobilizer and radio PIN code), Aventador, Huracán, and Urus.

Approved Bugatti vehicles


• Bugatti Veyron and Bugatti Chiron are supported.

Approved MAN vehicles


• MAN-TGE is supported.

You might also like