Professional Documents
Culture Documents
Sumitomo EWC Catalogue All Products
Sumitomo EWC Catalogue All Products
第 1 章 絶縁電線
Section 1 Insulation Electronic Wire
(2014.02)
INDEX
UL スタイル No. CSA タイプ ページ
UL Style No. CSA Type Page
デカブロフリーイラックス ® B28 絶縁電線(125℃、150V)
UL 3265 AWM 1-20
IRRAX™B28 WIRE (NON-PBDE TYPE)
CL 1252 デカブロフリーイラックス ® B28 絶縁電線(125℃、300V)
UL 3266 1-21
AWM IRRAX™B28 WIRE (NON-PBDE TYPE)
CL 1252 デカブロフリーイラックス ® B32 絶縁電線(125℃、300V)
UL 3266 1-22
AWM IRRAX™B32 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B28 絶縁電線(125℃、600V)
UL 3271 CL 1251 1-23
IRRAX™B28 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B32 絶縁電線(125℃、600V)
UL 3271 CL 1251 1-24
IRRAX™B32 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B28 絶縁電線(125℃、600V)
UL 3887 AWM 1-25
IRRAX™B28 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B30 絶縁電線(150℃、300V)
UL 3398 AWM 1-26
IRRAX™B30 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B30 絶縁電線(150℃、600V)
UL 3289 AWM 1-27
IRRAX™B30 WIRE (NON-PBDE TYPE)
デカブロフリーイラックス ® B30 絶縁電線(150℃、600V)
UL 3888 AWM 1-28
IRRAX™B30 WIRE (NON-PBDE TYPE)
イラックス ® R9 絶縁電線(200℃、300V)
UL 3826 AWM 1-29
IRRAX ™ R9 INSULATED WIRE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線(二次側リード線)。 Internal wiring of electrical and elrctronic equipment (Secondary
circuits lead wire).
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 300V、定格温度 80℃(UL)、90℃(CSA) CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Rating ����� Rating voltage 300 V, rating temperature
基づく垂直燃焼試験に合格します。 80℃ (UL), 90℃ (CSA).
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1, CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線(一次回路のリード線)。 Internal wiring of electrical and electronic equipment (Primary
circuits lead wire).
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 600V、定格温度 105℃ CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Rating ����� Rating voltage 600 V, rating temperature
づく垂直燃焼試験に合格します。 105℃ .
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1, CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, C-UL ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線(一次回路のリード線)。 Internal wiring of electrical and electronic equipment (Primary
circuits lead wire).
特 長 DESCRIPTION
■定 格 ��定格電圧 600V、定格温度 105℃ ■ Rating ����� Rating voltage 600 V, rating temperature
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 105℃ .
づく垂直燃焼試験に合格します。 ■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1, CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
TV 受信機その他の電子機器の高圧回路のリード線として最適で It is optimum as lead wire of high voltage circuit of TV receiver
す。 and other electronic equipment.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 1000V、定格温度 90℃ CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Rating ����� Rating voltage 1000 V, rating temperature
基づく垂直燃焼試験に合格します。 90℃ .
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1, CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電子機器の内部配線。狭いスペースへの配線に適しています。 Internal wiring of electronic equipment. It is adequate for wrapping
wiring and the use requiring the consideration on the space factor.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 300V、定格温度 80℃ CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Rating ����� Rating voltage 300 V, rating temperature
基づく垂直燃焼試験に合格します。 80℃ .
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1, CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器内部配線、スペースファクターの考慮を要する用 Internal wiring of electrical and electronic equipment. It is adequate
途に適しています。
(デジタルカメラ・モーターリード・バッテリ− for the use of requiring the consideration of the space factor such as
リードなど) digitalcameras, motor lead wire and battery lead wire.
特 長 DESCRIPTION
■定 格 ��定格電圧 30V、定格温度 80℃ ■ Rating ����� Rating voltage 30 V, rating temperature 80℃ .
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 ■ Flamability ��� These wires pass the vertical flame test
焼試験に合格します。 based on UL VW-1.
■耐熱性 ��絶縁体は照射架橋されており熱的に安全なため、 ■ Heat resistance � The insulation is cross-linked by irradiation
300 〜 380℃の半田ごてが触れても溶融しにくく and stable thermally.
なっています。 ■ Outer diameter �� Small finished diameter is advantageous in
■外 径………仕上外径が細くスペースファクター上有利です。 relation to space factor.
■耐油性………通常の塩化ビニルに比較し優れています。 ■ Oil resistance �� It is excellent compared with normal PVC wire.
■耐薬品性……通常の塩化ビニルに比較し優れています。 ■ Chemical resistance � It is excellent compared with normal PVC wire.
■圧接用 ��AWG26、28 は 2mm ピッチの圧接コネクタに適合 ■ IDC ������ AWG26, 28 can use for insulation
します。 displacement contact.
(Connecter pitch is 2 mm pitch)
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
柔軟性を生かした製品 FLEXIBLE PRODUCTS
定 格 導 体(錫めっき軟銅線) 絶縁体(鉛フリーイラックス ® V2) 最 大 最 小 絶 縁
RATING CONDUCTOR INSULATION 導体抵抗 絶縁抵抗 耐 圧
UL (Tinned Annealed Copper Wire) (Lead Free IRRAX™V2) MAX. MIN. DIELEC-
スタイル No. CON- INSULA- TRIC
温 度 電 圧 サイズ 構 成 外 径 厚 さ 外 径 DUCTOR TION STRENG-
UL TEMP. VOLT. SIZE No./mm NOM. DIA. NOM. NOM. DIA. RESIST- RESIST- TH
STYLE No. (℃ ) (VAC) (AWG) (mm) THICK. (mm) ANCE ANCE VAC(1min)
(mm) (20℃ ) (20℃ )
( Ω /km) (M Ω・km)
32 20/0.05 0.26 0.15 0.56 535
1571 80 30 30 30/0.05 0.32 0.15 0.62 369 15 500
28 44/0.05 0.39 0.16 0.70 232
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
配線スペースの狭い小型電子機器・モバイル機器の内部配線に適 Internal wiring(narrow space)of electronic equipment ; mobile
しています。 equipment and small electronic equipment. Especially it is
特にノート PC・ビデオカメラなど、屈曲が必要な用途に適して confirm to need high bending durability ; notebook PCs, digital
います。 videos etc.
特 長 DESCRIPTION
■ 0.8mm・0.6mm ピッチの圧接コネクタに適合可能。銅合金線の使 ■ It is possible to confirm 0.8 mm, 0.6 mm pitch piercing
用により、高耐屈曲性を実現。 connector.
It is realized high bending durability to use copper alloy wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電子機器の内部配線。 Used for wiring of electronic equipment.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ����� These wires are approved by both UL and CSA
■定 格 ��定格電圧 300V、定格温度 105℃ standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Rating ������ Rating voltage 300 V, rating temperature 105℃ .
づく垂直燃焼試験に合格します。 ■ Flamability ���� These wires pass the vertical flame test based on
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なので、 UL VW-1, CSA FT1.
300 〜 380℃の半田ごてが触れても溶融しにくく ■ Heat resistance �� The insulation is cross-linked by irradiation and
なっています。 stable thermally.
■外 径 ��仕上外径が細くスペースファクター上有利です。 ■ Outer diameter ��� Small finished diameter is advantageous in
■二重絶縁体 各層の局部最小厚が 0.4mm 以上です。 relation to space factor.
■耐油性 ��通常の塩化ビニルに比較し優れています。 ■ Double insulation �� The minimum thickness of every layer at any
■耐薬品性 �通常の塩化ビニルに比較し優れています。 point is more than 0.4 mm.
■ Oil resistance ��� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体
Conductor
一次絶縁体 二次絶縁体
Primary insulation Secondary insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
UL STYLE 10272 LF, 3610 LF, CSA AWM 鉛フリー 1.5mm ピッチ圧接コネクタ用絶縁電線
LEAD FREE WIRE FOR 1.5 mm PITCH PIERCING CONNECTOR
RoHS Directive
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
配線スペースの狭い小型電子機器・モバイル機器の内部配線に適 Internal wirinig(narrow space)of electronic equipment ; mobile
しています。 equipment and small electronic equipment. Especially it is
特に OA 機器など、許容電流値が必要な用途に適しています。 necessary high permissible current ; OA equipment etc.
特 長 DESCRIPTION
■ 1.5mm ピッチの圧接コネクタに適合可能。 ■ It is possible to confirm 1.5 mm pitch piercing connector.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※対応コネクタは一例です。他コネクタについては弊社営業へお問い合せ下さい。
※ The connectors in the list is one such example. Please contact sales department to other connector than the ones shown here.
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線。耐熱性を必要とする狭い箇所への配 Internal wiring of electrical and electronic equipment, especially
線に適しています。 for compact size type.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 300V、定格温度 105℃ CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Rating ����� Rating voltage 300 V, rating temperature
基づく垂直燃焼試験に合格します。 105℃ .
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なので、 ■ Flamability ��� These wires pass the vertical flame test
300 〜 380℃の半田ごてが触れても溶融しにくく based on UL VW-1, CSA FT1.
なっています。 ■ Heat resistance � The insulation is cross-linked by
irradiation and stable thermally.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線。 Internal wiring of electrical and electronic equipment. (Internal wiring
(ドライヤー、炊飯器、トランス口出、照明器具、エアコンなど of high temperature and temperature elevation appliances such as
の高温部での配線に適しています。) dryers, toasters, hair curlers, electric rice cookers, etc. Transformer
lead wire, lighting equipment wiring, air conditioner wiring, etc.)
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ����� These wires are approved by both UL and CSA
■定 格 ��定格電圧 300V、定格温度 105℃ standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Rating ������ Rating voltage 300 V, rating temperature 105℃ .
づく垂直燃焼試験に合格します。 ■ Flamability ���� These wires pass the vertical flame test based on
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なので、 UL VW-1, CSA FT1.
300 〜 380℃の半田ごてが触れても溶融しにくく ■ Heat resistance �� The insulation is cross-linked by irradiation and
なっています。 stable thermally.
■外 径 ��仕上外径が細くスペースファクター上有利です。 ■ Outer diameter ��� Small finished diameter is advantageous in
■絶縁体厚さ 局部最小厚が 0.4mm 以上です。 relation to space factor.
■ Insulation thickness � The minimum thickness at any point is more than
0.4 mm.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の一次回路のリード線等に適しています。 Internal wiring of electrical and electronic equipment.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 600V、定格温度 105℃ CSA standard.
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Rating ����� Rating voltage 600 V, rating temperature
づく垂直燃焼試験に合格します。 105℃ .
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なので、 ■ Flamability ��� These wires pass the vertical flame test
300 〜 380℃の半田ごてが触れても溶融しにくく based on UL VW-1, CSA FT1.
なっています。 ■ Heat resistance � The insulation is cross-linked by
irradiation and stable thermally.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL 規格対象の電気・電子機器に適しています。 It is used in electrical and electronic equipment specified in the
UL standard.
特 長 DESCRIPTION
■定 格 ��定格電圧 30V、定格温度 105℃ ■ Rating ����� Rating voltage 30 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロゲン ■ Insulation ���� Insulation material is our original flame
化合物、赤リン、鉛および鉛系化合物、アンチモ retardant polyolefin. This material doesn't
ンおよびアンチモン系化合物を使用しておりません。 use any halogen or halogen compounds, red
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 phosphorus, any lead or lead compounds or
焼試験に合格します。 any antimony or antimony compounds at all.
■ Flamability ��� These wires pass the vertical flame test
bassed on UL VW-1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL 規格対象の電気・電子機器の内部配線に適しています。 It is used in electrical and electronic equipment specified in the
特に配線スペースの狭い小型電子機器・モバイル機器の内部配線 UL standard. Especially Internal wiring(narrow space)of
に適しています。 electronic equipment; mobile equipment and electronic equipment.
特 長 DESCRIPTION
■定 格 ��定格電圧 30V、定格温度 105℃ ■ Rating ����� Rating voltage 30 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロゲン ■ Insulation ���� Insulation material is our original flame
化合物、赤リン、鉛および鉛系化合物、アンチモ retardant polyolefin. This material doesn't
ンおよびアンチモン系化合物を使用しておりません。 use any halogen or halogen compounds, red
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 phosphorus, any lead or lead compounds or
焼試験に合格します。 any antimony or antimony compounds at all.
■外 径 ��仕上外径が細くスペースファクター上有利です。 ■ Flamability ��� These wires pass the vertical flame test
■適応コネクタ ��AWG28 は 1.0mm ピッチ・0.8mm ピッチの圧着コ bassed on UL VW-1.
ネクタに適合します。適応コネクタはお問い合わ ■ Outer diameter � Small finished diameter is advantageous in
せください。 relation to space factor.
■ Connector …AWG28 is suitable for 1.0mm,0.8mm pitch crimp
type connector.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器に適しています。 It is used in electrical and electronic equipment specified in the
UL and CSA standard .
特 長 DESCRIPTION
■定 格 ��定格電圧 300V、定格温度 105℃ ■ Rating ����� Rating voltage 300 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロ ■ Insulation ���� Insulation material is our original flame
ゲン化合物、赤リン、鉛および鉛系化合物、アン retardant polyolefin. This material doesn't
チモンおよびアンチモン系化合物を使用しており use any halogen or halogen compounds, red
ません。 phosphorus, any lead or lead compounds or
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に any antimony or antimony compounds at all.
基づく垂直燃焼試験に合格します。 ■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器に適しています。 It is used in electrical and electronic equipment specified in the
UL and CSA standard.
特 長 DESCRIPTION
■定 格 ��定格電圧 600V、定格温度 105℃ ■ Rating ����� Rating voltage 600 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロ ■ Insulation ���� Insulation material is our original flame
ゲン化合物、赤リン、鉛および鉛系化合物、アン retardant polyolefin. This material doesn't
チモンおよびアンチモン系化合物を使用しており use any halogen or halogen compounds, red
ません。 phosphorus, any lead or lead compounds or
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に any antimony or antimony compounds at all.
基づく垂直燃焼試験に合格します。
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器に適しています。 It is used in electrical and electronic equipment specified in the
UL and CSA standard.
特 長 DESCRIPTION
■定 格 ��定格電圧 600V、定格温度 105℃ ■ Rating ����� Rating voltage 600 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロ ■ Insulation ���� Insulation material is our original flame
ゲン化合物、赤リン、鉛および鉛系化合物、アン retardant polyolefin. This material doesn't
チモンおよびアンチモン系化合物を使用しており use any halogen or halogen compounds, red
ません。 phosphorus, any lead or lead compounds or
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に any antimony or antimony compounds at all.
基づく垂直燃焼試験に合格します。
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器に適しています。 It is used in electrical equipment specified in the UL and CSA
standard.
特 長 DESCRIPTION
■定 格 ��定格電圧 600V、定格温度 105℃ ■ Rating ����� Rating voltage 600V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであ 105℃ .
り、塩素や臭素に代表されるハロゲン元素および ■ Insulation ���� Insulation material is our original flame
ハロゲン化合物、赤リン、鉛および鉛系化合物、 retardant polyolefin.This material doesn't
アンチモンおよびアンチモン系化合物を使用して use any halogen or halogen compounds, red
おりません。 phosphorus,any lead or lead compounds or
■難燃性 ��UL VW-1、CSA FT1、電気用品安全法に基づく any antimony or antimony compounds at
垂直燃焼規格 (F マーク ) に合格します。 all.
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器に適しています。 It is used in electrical and electronic equipment specified in the
UL and CSA standard.
特 長 DESCRIPTION
■定 格 ��定格電圧 300V、定格温度 105℃ ■ Rating ����� Rating voltage 300 V, rating temperature
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであり、 105℃ .
塩素や臭素に代表されるハロゲン元素およびハロ ■ Insulation ���� Insulation material is our original flame
ゲン化合物、赤リン、鉛および鉛系化合物、アン retardant polyolefin. This material doesn't
チモンおよびアンチモン系化合物を使用しており use any halogen or halogen compounds, red
ません。 phosphorus, any lead or lead compounds or
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に any antimony or antimony compounds at all.
基づく垂直燃焼試験に合格します。
■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
電気・電子機器の内部配線。スペースファクターの考慮を要する Internal wiring of electrical and electronic equipment. It is adequate
用途に適しています。 for the use of requiring the consideration of the space factor.
(ドライヤー・炊飯器等高温昇温機器内部配線・モーターリードなど) (Internal wiring of high temperature,and temperature elevation
appliances, such as dryers, electronic rice cookers, motor lead, etc.)
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格共用です。 ■ Standard ���� These wires are approved by both UL and
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 CSA standard.
難燃剤を使用しておりません。 ■ Insulation ���� Insulation material of these wires doesn't
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に use any PBDEs or PBBs as flame
基づく垂直燃焼試験に合格します。 retardants at all.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Flamability ��� These wires pass the vertical flame test
300 〜 380℃の半田ごてが触れても溶融しにくく based on UL VW-1, CSA FT1.
なっています。 ■ Heat resistance � The insulation is cross-linked by
■外 径 ��仕上外径が細くスペースファクター上有利です irradiation and stable thermally.
■機械的性能 イラックス ®B28 は高温カットスルー抵抗が優れて ■ Outer diameter � Small finished diameter is advantageous in
おり、高温において金属エッジに対し、優れた強度 relation to space factor.
を有します。 ■ Mechanical property IRRAX™B28 is excellent in high
■耐油性 ��通常の塩化ビニルに比較し優れています。 temperature cut through resistance, and it
■耐薬品性 �通常の塩化ビニルに比較し優れています。 has excellent strength against the metal
edge at high temperature.
■ Oil resistance �� It is excellent compared with normal PVC
wire.
■ Chemical resistance It is excellent compared with normal PVC
wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格、電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 300V、定格温度 125℃ CSA standard.
電気用品安全法の絶縁物の使用上限値 130℃で ■ Rating ����� Rating voltage 300 V, rating temperature
す。 125℃ . The working upper limit temperature
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 value of insulation in the Electrical Appliance
難燃剤を使用しておりません。 and Material Safety Law is 130℃ .
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Insulation ���� Insulation material of these wires doesn't use
づく垂直燃焼試験に合格します。 any PBDEs or PBBs as flame retardants at
■耐熱性 ��絶縁体は電子線照射架橋されており熱的に安定な all.
ため、300 〜 380℃の半田ごてが触れても溶融し ■ Flamability ��� These wires pass the vertical flame test
にくくなっています。 based on UL VW-1, CSA FT1.
■絶縁体厚さ 局部最小厚 0.4mm 以上です。 ■ Heat resistance � The insulation is cross-linked by irradiation
■耐油性 ��通常の塩化ビニルに比較し優れています。 and stable thermally.
■耐薬品性 �通常の塩化ビニルに比較し優れています。 ■ Insulation thickness � The minimum thickness at any point is more
than 0.4 mm.
■ Oil resistance �� It is excellent compared with normal PVC
wire.
■ Chemical resistance � It is excellent compared with normal PVC
wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格………UL、CSA 規格、電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格………定格電圧 300V、定格温度 125℃ CSA standard.
電気用品安全法の絶縁物の使用上限値 125℃で ■ Rating ����� Rating voltage 300 V, rating temperature
す。 125℃ . The working upper limit temperature
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 value of insulation in the Electrical Appliance
難燃剤を使用しておりません。 and Material Safety Law is 125℃ .
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に基 ■ Insulation ���� Insulation material of these wires doesn't use
づく垂直燃焼試験に合格します。 any PBDEs or PBBs as flame retardants at
■耐熱性 ��絶縁体は電子線照射架橋されており熱的に安定な all.
ため、300 〜 380℃の半田ごてが触れても溶融し ■ Flamability ��� These wires pass the vertical flame test based
にくくなっています。 on UL VW-1, CSA FT1.
■イラックス ®B28 電線より柔軟です。 ■ Heat resistance � The insulation is cross-linked by irradiation
■耐油性 ��通常の塩化ビニルに比較し優れています。 and stable thermally.
■耐薬品性 �通常の塩化ビニルに比較し優れています。 ■ IRRAX™B32 WIRE is more flexible than IRRAX™B28 WIRE.
■ Oil resistance �� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格………UL、CSA 規格、電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格………定格電圧 600V、定格温度 125℃ CSA standard.
電気用品安全法の絶縁物の使用上限値 130℃です。 ■ Rating ����� Rating voltage 600 V, rating temperature
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 125℃ . The working upper limit temperature
難燃剤を使用しておりません。 value of insulation in the Electrical Appliance
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に and Material Safety Law is 130℃ .
基づく垂直燃焼試験に合格します。 ■ Insulation ���� Insulation material of these wires doesn't use
■耐熱性 ��絶縁体は電子線照射架橋されており熱的に安定な any PBDEs or PBBs as flame retardants at
ため、300 〜 380℃の半田ごてが触れても溶融し all.
にくくなっています。 ■ Flamability ��� These wires pass the vertical flame test based
■耐油性 ��通常の塩化ビニルに比較し優れています。 on UL VW-1, CSA FT1.
■耐薬品性 �通常の塩化ビニルに比較し優れています。 ■ Heat resistance � The insulation is cross-linked by irradiation
and stable thermally.
■ Oil resistance �� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格………UL、CSA、 電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格………定格電圧 600V、定格温度 125℃ CSA standard.
電気用品安全法の絶縁物の使用上限値 125℃です。 ■ Rating ����� Rating voltage 600 V, rating temperature
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 125℃ . The working upper limit temperature
難燃剤を使用しておりません。 value of insulation in the Electrical Appliance
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に and Material Safety Law is 125℃ .
基づく垂直燃焼試験に合格します。 ■ Insulation ���� Insulation material of these wires doesn't use
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 any PBDEs or PBBs as flame retardants at
300 〜 380℃の半田ごてが触れても溶融しにくくな all.
っています。 ■ Flamability ��� These wires pass the vertical flame test based
■イラックス ®B28 電線より柔軟です。 on UL VW-1, CSA FT1.
■耐油性 ��通常の塩化ビニルに比較し優れています。 ■ Heat resistance � The insulation is cross-linked by irradiation
■耐薬品性 �通常の塩化ビニルに比較し優れています。 and stable thermally.
■ IRRAX™B32 WIRE is more flexible than IRRAX™B28 WIRE.
■ Oil resistance �� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, C-UL ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■定 格………定格電圧 600V、定格温度 125℃ ■ Rating ����� Rating voltage 600 V, rating temperature
電気用品安全法の絶縁物の使用上限値 130℃です。 125℃ . The working upper limit temperature
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 value of insulation in the Electrical Appliance
難燃剤を含んでおりません。 and Material Safety Law is 130℃ .
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Insulation ���� Insulation material of these wires doesn't
基づく垂直燃焼試験に合格します。 contain any PBDEs or PBBs as flame
■耐熱性 ��絶縁体は電子線照射架橋されており熱的に安定な retardants at all.
ため、300 〜 380℃の半田ごてが触れても溶融し ■ Flamability ��� These wires pass the vertical flame test based
にくくなっています。 on UL VW-1, CSA FT1.
■耐油性 ��通常の塩化ビニルに比較し優れています。 ■ Heat resistance � The insulation is cross-linked by irradiation
■耐薬品性 �通常の塩化ビニルに比較し優れています。 and stable thermally.
■ Oil resistance �� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格、電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 300V、定格温度 CSA standard.
電気用品安全法の絶縁物の使用上限値 125℃ ■ Rating ����� Rating voltage 300 V, rating temperature
Working upper limit value of insulation in the
UL 規格 150℃ Electrical Appliance and Material Safety Law
125℃
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, CSA STANDARD ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■規 格 ��UL、CSA 規格、電気用品安全法共用です。 ■ Standard ���� These wires are approved by both UL and
■定 格 ��定格電圧 600V、定格温度 CSA standard.
電気用品安全法の絶縁物の使用上限値 125℃ ■ Rating ����� Rating voltage 600 V, rating temperature
Working upper limit value of insulation in the
UL 規格 150℃ Electrical Appliance and Material Safety Law
125℃
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・CSA 規格電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
UL、CSA 規格対象の電気・電子機器および電気用品安全法の絶 It is used in electrical and electronic equipment specified in the UL
縁物の使用温度上限値規制を対象とした機器に適しています。 and CSA standard and in appliances with the working temperature
upper limit value restriction of insulation of electrical and electronic
equipment in the Electrical Appliance and Material Safety Law.
特 長 DESCRIPTION
■定 格 ��定格電圧 600V、定格温度 150℃電気用品安全法 ■ Rating ����� Rating voltage 600 V, rating temperature 150℃
の絶縁物の使用上限値 125℃です。 The working upper limit temperature value of
■絶縁体 ��この絶縁体には PBDEs・PBBs 等の特定臭素系 insulation in the Electrical Appliance and
難燃剤を使用しておりません。 Material Safety Law is 125℃
■難燃性 ��UL VW-1、CSA FT1 および電気用品安全法に ■ Insulation ���� Insulation material of these wires doesn't use any
基づく垂直燃焼試験に合格します。 PBDEs or PBBs as flame retardants at all.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Flamability ���� These wires pass the vertical flame test based
300 〜 380℃の半田ごてが触れても溶融しにくく on UL VW-1, CSA FT1.
なっています。 ■ Heat resistance � The insulation is cross-linked by irradiation and
■耐油性 ��通常の塩化ビニルに比較し優れています。 stable thermally.
■耐薬品性 �通常の塩化ビニルに比較し優れています。 ■ Oil resistance �� It is excellent compared with normal PVC wire.
■ Chemical resistance � It is excellent compared with normal PVC wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
Conductor Insulation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC Halogen
XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
PVC Free XLPE Free Free Free Free Free Free Free Free
用 途 APPLICATION
複写機、電子炊飯器等耐熱性が要求される電気機器の内部配線に Suitable for internal wiring of electric equipment required heat
適しています。 resistance.(Copymachine,ricecooker,etc.)
特 長 DESCRIPTION
■定 格 ��定格電圧 300V(AC)、定格温度 200℃ ■ Rating ����� Rating voltage 300 V, rating temperature
■難燃性 ��UL VW-1、CSA FT1、電気用品安全法に基づく 200 ℃ .
垂直燃焼規格(F マーク)に合格します。 ■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1 and CSA FT1.
■細 経 ��従来品と比べて細経です。 ■ Thin ������ Small diameter compared with conventional
wire.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
INDEX
第 2 章 高圧線
Section 2 High Voltage Wire
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
電子レンジ、複写機等の電気・電子機器高圧用リード線に適して Suitable for internal wiring of electronic oven and copy machine
います。 etc.
特 長 DESCRIPTION
■定 格 ��定格電圧 10kV(DC), 20kV(DC)、定格温度 105℃ ■ Rating ����� Rating voltage 10,20 kV(DC) , rating
■難燃性 ��UL VW-1、電気用品安全法に基づく垂直難燃規 temperature 105℃ .
格 (F マーク ) に合格します。 ■ Flamability ��� These wires pass the vertical flame test
based on UL VW-1.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
20kV(DC) の場合
20kV(DC)
1次絶縁体 2次絶縁体
Primary Insulation Secondary Insulation
マーキングは一行で表示されます。
導 体 Identification marking is printed in one line.
Conductor
イラックス ®HF
10 22 7/0.26 0.78 0.61 2.00 0.10 2.20
IRRAX™HF
3239 105
イラックス ®
20 22 7/0.26 0.78 0.31 1.40 0.90 3.20
IRRAX™
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
液晶ディスプレーのバックライトを始め、ファクシミリ、スキャナ Internal wiring of electrical equipment. It is adequate for the use
のランプなど、高電圧が印加され柔軟性を必要とされるリード線 requiring the consideration on voltage rating, flexibility, and space
としての使用に適しています。 factor. (Internal wiring of backlight uanit of flat panel displays, etc.)
特 長 DESCRIPTION
■定 格 ��定格電圧 3kV (DC)
、6kV
(DC)
、10kV
(DC)、20kV
(DC) ■ Rating ����� Rating voltage 3, 6, 10 kV(DC), rating
定格温度 105℃ temperature 105℃ .
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 ■ Flamability ��� These wires pass the vertical flame test
焼試験に合格します。 based on UL VW-1.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance � The insulation is cross-linked by
300 〜 380℃の半田ごてが触れても溶融しにくく irradiation and stable thermally.
なっています。 ■ Outer diameter � Small finished diameter is advantageous in
■外 径 ��仕上外径が細くスペースファクター上有利です。 relation to space factor.
■機械的性能 耐エッジ性に優れ、狭いスペースでの配線作業上 ■ Mechanical property This insulation material has excellent
有利です。 strength against metal edge.
■絶縁体 ��この絶縁体には PBDEs・PBBs などの特定臭素 ■ Insulation ���� Insulation material of these wires doesn't
系難燃剤を使用しておりません。 use any PBDEs or PBBs as flame
retardants at all.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
液晶ディスプレーのバックライトを始め、ファクシミリ、スキャナ Internal wiring of electrical equipment. It is adequate for the use
のランプなど、高電圧が印加され柔軟性を必要とされるリード線 requiring the consideration on voltage rating, flexibility, and space
としての使用に適しています。 factor. (Internal wiring of backlight unit of flat panel displays, etc.)
特 長 DESCRIPTION
■定 格 ��定格電圧 3kV (AC)、定格温度 150℃ ■ Rating ����� Rating voltage 3 kV(AC), rating
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 temperature 150℃ .
焼試験に合格します。 ■ Flamability ��� These wires pass the vertical flame test
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 based on UL VW-1.
300 〜 380℃の半田ごてが触れても溶融しにくく ■ Heat resistance � The insulation is cross-linked by
なっています。 irradiation and stable thermally.
■機械的性能 耐エッジ性に優れ、狭いスペースでの配線作業上 ■ Mechanical property This insulation material has excellent
有利です。 strength against metal edge.
■絶縁体 ��この絶縁体には PBDEs・PBBs などの特定臭素 ■ Insulation ���� Insulation material of these wires doesn't
系難燃剤を使用しておりません。 use any PBDEs or PBBs as flame
retardants at all.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
液晶ディスプレーのバックライトのリード線に適しています。 Suitable for backlight lead wire.
特 長 DESCRIPTION
■定 格 ��定格電圧 3kV(AC)、定格温度 105℃ ■ Rating ����� Rating voltage 3kV(AC),rating temperature
■難燃性 ��UL VW-1 CSA FT1 および電器用品安全法に基 105℃
づく垂直難燃試験に合格します。 ■ Flamability ��� These wires pass the vertical flame test
■絶縁体 ��絶縁体は当社独自配合の難燃ポリオレフィンであり、 based on UL VW-1 and CSA FT1.
塩素や臭素に代表されるハロゲン元素およびハロ ■ Insulation ���� Insulation material is our original flame
ゲン化合物、赤リン、鉛および鉛系化合物、アン retardant polyolefin. This material doesn't
チモンおよびアンチモン系化合物を使用しておりま use any halogen or halogen compounds, red
せん。 phosphorus, any lead or lead compounds or
■外 径 ��仕上外径が細くスペースファクター上有利です。 any antimony or antimony compounds at all.
■ Outer diameter � Small finished diameter is advantageous in
relation to space factor.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
絶縁体
導 体
Insulation
Conductor
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL・C-UL 電線 UL, C-UL ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
液晶ディスプレーのバックライトを始め、ファクシミリ、スキャ Internal wirng of electrical equipment. It is adequate for the use
ナのランプなど、高電圧が印加され柔軟性を必要とされるリード requiring the consideration on voltage rating, flexibility, and
線としての使用に適しています。 space factor. (Internal wiring of backlight unit of flat panel
display, etc.)
特 長 DESCRIPTION
■定 格 ��定格電圧 3kV(AC)、定格温度 125℃ ■ Rating ����� Rating voltage 3kV(AC), rating
■難燃性 ��UL VW-1、CSA FT1、電気用品安全法に基づく temperature 125℃ .
垂直燃焼規格 (F マーク ) に合格します。 ■ Flamability ��� These wires pass the vertical flame test
■絶縁体 ��絶縁体は当社独自技術の難燃ポリオレフィンであ based on UL VW-1 and CSA FT1.
り、塩素や臭素に代表されるハロゲン元素および ■ Insulation ���� Insulation material is our original flame
ハロゲン化合物、赤リン、鉛および鉛系化合物、 retardant polyolefin. This material doesn't
アンチモンおよびアンチモン系化合物を使用して use any halogen or halogen compounds, red
おりません。 phosphorus,any lead or lead compounds or
any antimony or antimony compounds at
all.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
INDEX
第 3 章 横巻シ−ルド線
Section 3 Spiral Shielded Wire
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
ピーク電圧 42.4V 以下、実用実効電圧 30V 以下の低圧で二次側 These wires are used for signal transmission of secondary wiring
回路の信号伝送用に用います。 in the low voltage; peak voltage is less than 42.4 V and operational
effective voltage is less than 30 V.
特 長 DESCRIPTION
■定 格………定格電圧 30V、定格温度 80℃ ■ Rating ������ Rating voltage 30 V, rating temperature 80℃ .
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 ■ Flamability ���� These wires pass the vertical flame test based on
焼試験に合格します。 UL VW-1.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance �� The insulation is cross-linked by irradiation and
300 〜 380℃の半田ごてが触れても溶融しにくく stable thermally.
なっています。 ■ Outer diameter �� Small finished diameter is advantageous in relation
■外 径………仕上外径が細くスペースファクター上有利です。 to space factor.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
UL Style 1571 鉛フリーイラックス ® V2 絶縁横巻シールド線(単心)
UL Style 1571 Lead free IRRAX™V2 insulated spiral shielded wire (single core)
絶縁体 横巻シールド 外 被
Insulation Spiral shield Jacket
導 体
Conductor
導 体
Conductor
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
用 途 APPLICATION
ピーク電圧 42.4V 以下、実用実効電圧 30V 以下の低圧で二次側 These wires are used for signal transmission of secondary wiring
回路の信号伝送用に用います。 in the low voltage; peak voltage is less than 42.4 V and
operational effective voltage is less than 30 V.
特 長 DESCRIPTION
■定 格………定格電圧 30V、定格温度 80℃ ■ Rating �������Rating voltage 30 V, rating temperature 80℃ .
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 ■ Flamability �����These wires pass the vertical flame test based on
焼試験に合格します。 UL VW-1.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance ���The insulation is cross-linked by irradiation and
300 〜 380℃の半田ごてが触れても溶融しにくく stable thermally.
なっています。 ■ Electric property ��The electric capacity is low and stable in the
■電気特性 �低容量であり長さ方向の静電容量の変動が少なく longitudinal direction.
安定しています。 ■ Outer diameter ���Small finished diameter is advantageous in relation
■外 径………仕上外径が細くスペースファクター上有利です。 to space factor.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
UL Style 1631 鉛フリー発泡イラックス ® A 絶縁横巻シールド線(単心)
UL Style 1631 Lead free foamed IRRAX™A insulated spiral shielded wire (single core)
1631 AWG 28-PEFXSV 80 30 28 7/0.127 0.38 0.29 0.96 — — 0.10 1.16 0.25 1.66 224 1000 500 ≦ 110
2623 AWG 28 × 2-PEFXSV 80 30 28 7/0.127 0.38 0.25 0.88 2 1.76 0.10 1.96 0.27 2.50 224 1000 500 ≦ 97
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
用 途 APPLICATION
ピーク電圧 42.4V 以下、実用実効電圧 30V 以下の低圧で二次側 These wires are used for signal transmission of secondary wiring
回路の信号伝送用に用います。 in the low voltage; peak voltage is less than 42.4 V and
operational effective voltage is less than 30 V.
特 長 DESCRIPTION
■定 格………定格電圧 30V、定格温度 80℃ ■ Rating ����� Rating voltage 30 V, rating temperature
■難燃性 ��UL VW-1 および電気用品安全法に基づく垂直燃 80℃ .
焼試験に合格します。 ■ Flamability ��� These wires pass the vertical flame test
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 based on UL VW-1.
300 〜 380℃の半田ごてが触れても溶融しにく ■ Heat resistance � The insulation is cross-linked by irradiation and
くなっています。 stable thermally.
■電気特性 �低容量であり長さ方向の静電容量の変動が少なく ■ Electric property � The electric capacity is low and stable in
安定しています。 the longitudinal direction.
■絶縁体 ��この絶縁体には PBDEs・PBBs などの特定臭素 ■ Insulation ���� Insulation material of these wires doesn't
系難燃剤を使用しておりません。 use any PBDEs or PBBs as flame
retardants at all.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
UL Style 1691 鉛フリー発泡イラックス ® B 絶縁横巻シールド線(単心)
UL Style 1691 Lead free foamed IRRAX™B insulated spiral shielded wire (single core)
定 格 導 体 絶縁体 撚 合 横巻シールド 外 被 最 大 最 小 絶 縁 静 電
RATING (錫めっき軟銅線)(鉛フリー発泡イラックス ®B) STRAND (錫めっき軟銅線)(鉛フリー耐熱塩化ビニル) 導体抵抗 絶縁抵抗 耐 圧 容 量
CONDUCTOR INSULATION SPIRAL SHIELD JACKET MAX. MIN. DIELEC- CAPACI-
UL (Tinned Annealed (Lead Free Foamed (Tinned Annealed (Lead Free Heat CON- INSULA- TRIC TANCE
スタイル No. Resistant PVC)
Copper Wire) IRRAX™B) Copper Wire) DUCTOR TION STRENG- (pF/m)
品 名
RESIST- RESIST- TH
UL NAME 温 度 電 圧 サイズ 構 成 外 径 厚 さ 外 径 心 数 外 径 素線径 外 径 厚 さ 外 径
ANCE ANCE VAC
STYLE TEMP. VOLT. SIZE No./ NOM. NOM. NOM. No. NOM. ELE- NOM. NOM. NOM.
MENT (20℃ ) (20℃ ) (1min)
No. (℃ ) (VAC) (AWG) mm DIA. THICK. DIA. OF DIA. DIA. THICK. DIA.
( Ω / (M Ω・km)
(mm) (mm) (mm) CORE (mm) WIRE (mm) (mm) (mm)
DIAM- km)
WIRE ETER
(N) (mm)
AWG30-FRPEFXSV 30 7/0.10 0.30 0.25 0.80 — — 0.08 0.96 0.22 1.40 355 ≦ 124
1691 AWG28-FRPEFXSV 80 30 28 7/0.127 0.38 0.29 0.96 — — 0.10 1.16 0.25 1.66 224 1000 500 ≦ 129
AWG26-FRPEFXSV 26 7/0.16 0.48 0.31 1.10 — — 0.10 1.30 0.25 1.80 140 ≦ 140
AWG30×2-FRPEFXSV 30 7/0.10 0.30 0.25 0.80 2 1.60 0.10 1.80 0.25 2.30 355 ≦ 101
AWG28×2-FRPEFXSV 28 7/0.127 0.38 0.25 0.88 2 1.76 0.10 1.96 0.27 2.50 224 ≦ 113
2791 80 30 1000 500
AWG26×2-FRPEFXSV 26 7/0.16 0.48 0.31 1.10 2 2.20 0.10 2.40 0.30 3.00 140 ≦ 114
AWG24×2-FRPEFXSV 24 7/0.203 0.61 0.25 1.11 2 2.22 0.12 2.41 0.33 3.12 86.0 ≦ 150
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
第 4 章 同軸ケーブル
Section 4 Coaxial Cable INDEX
UL スタイル No. ページ
UL Style No. Page
鉛フリー 50 Ω/ 75 Ωイラックス ®A 絶縁高周波同軸ケーブル(80℃、300V)
UL 1553 4-1
LEAD FREE 50 Ω /75 Ω IRRAX™A INSULATION HIGH FREQUENCY COAXIAL CABLE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格電線 UL STANDARD ELECTRONIC WIRE
用 途 APPLICATION
電子機器の内部配線として使用できます。 These wires are used for high frequency circuit wiring, acoustic
apparatus, etc. and approved by UL standard.
特 長 DESCRIPTION
■難燃性 ��UL VW-1 および電気用品安全法の垂直燃焼試験 ■ Flamability ��� These wires pass the vertical flame test based on
に合格します。 UL VW-1.
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance �� The insulation is cross-linked by irradiation and
300 〜 380℃の半田ごてが触れても溶融しにくく stable thermally.
なっています。 ■ Electrical property � The characteristic impedance variation in the
■電気特性 �長さ方向の特性インピーダンスの変動が少なく安 longitudinal direction is less and stable.
定しています。
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
絶縁体
Insulation
外部導体 外 被
External conductor Jacket
定 格 内部導体 絶縁体 外部導体 外 被 最 大 最 小 絶縁耐圧 標 準 特 性
RATING (イラックス ®A)(軟銅線編組)(鉛フリー塩化ビニル) 導体抵抗 絶縁抵抗 DIELEC- 静電容量 インピーダンス
INNER CONDUCTOR
UL INSULATION EXTERNAL JACKET MAX. MIN. TRIC NOM. IMPE-
スタイル (IRRAX™A) CONDUCTOR (Lead Free PVC) CON- INSULA- STLENG- CAPACI- DANCE
No. 品 名 (Annealed Copper Wire Braid)
DUCTOR TION TH TANCE (10MHz)
UL NAME 温 度 電 圧 サイズ 材 質 構 成 外 径 厚 さ 外 径 厚 さ 外 径 厚 さ 外 径 RESIST- RESIST- VAC (1kHz) ( Ω )
STYLE TEMP. VOLT. SIZE MATE- No./mm NOM. NOM. NOM. NOM. NOM. NOM. NOM. ANCE ANCE (1min) (pF/m)
(20℃ ) (20℃ )
No. (℃ ) (VAC) (AWG) RIAL DIA. THICK. DIA. THICK. DIA. THICK. DIA.
(mm) (mm) (mm) (mm) (mm) (mm) (mm) ( Ω /km) (M Ω
・km)
1.5DS-
25 7/0.18 0.54 0.55 1.64 0.25 2.14 0.43 3.0 111 105 50 ± 3
EXBV 軟銅線
Annealed
Copper
2.5D- Wire
21 1/0.80 0.80 0.93 2.66 0.30 3.26 0.52 4.3 42.7 100 50 ± 2
EXBV
1553 80 300 1000 1000
銅合金線
1.5CCA-
30 Copper 1/0.26 0.26 0.67 1.60 0.25 2.10 0.45 3.0 443
EXBV AlloyWire
69 75 ± 3
軟銅線
2.5C- Annealed
26 1/0.40 0.40 1.05 2.50 0.30 3.10 0.65 4.4 137
EXBV Copper
Wire
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
INDEX
第 5 章 自動車用耐熱電線、機器用電線
Section 5 Automobile Wire, Device Wire
ページ
自動車用耐熱電線 AUTOMOBILE WIRE Page
AEX, AVX(自動車用耐熱低圧電線)
5-1
HEAT RESISTANT LOW-VOLTAGE CABLES FOR AUTOMOBILES
AESSX, AVSSX(自動車用超薄肉耐熱低圧電線)
5-2
ULTRA THIN HEAT RESISTANT LOW VOLTAGE WIRE FOR AUTOMOBILE
AEX-28, AEX-30(自動車用高耐熱低圧電線)
5-3
HIGH HEAT RESISTANT LOW-VOLTAGE CABLES FOR AUTOMOBILES
EEX, EEXS, TEEX, TEEXS(電気自動車用高圧電線)
5-4
HIGH VOLTAGE CABLE FOR ELECTRIC VEHICLE
EX30(耐熱 150℃電気自動車用高圧電線)
5-5
HIGH VOLTAGE CABLE FOR ELECTRIC VEHICLE
イラックス ® O(自動車用耐燃料低圧電線)
5-6
FUEL RESISTANT LOW VOLTAGE WIRE FOR AUTOMOBILE
ページ
機器用電線 DEVICE WIRE Page
イラックス ® A 絶縁電線
5-7
IRRAX™A
鉛フリーイラックス ®A 絶縁高周波同軸ケーブル
5-8
LEAD FREE IRRAX™A HIGH FREQUENCY COAXIAL CABLE
鉛フリー LVCX 高周波同軸ケーブル
5-9
LEAD FREE LVCX HIGH FREQUENCY COAXIAL CABLE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
自動車用耐熱電線 AUTOMOBILE CABLES
用 途 APPLICATION
耐熱特性が要求されるエンジン等に近接した低圧回路配線に適し These are used in low voltage circuits adjacent to the engine,
ています。 etc. requiring special heat resistance in the wiring for automobile.
特 長 DESCRIPTION
■日本自動車技術会規格 JASO D608-92 に合格します。 ■ These conform with the Japanese Automotibes Standards
■耐熱区分 Organization;JASO D608-92.
電線種類 記号 耐熱区分 ■ Heat resistance class
自動車用架橋塩化ビニル絶縁耐熱低圧電線 AVX 100℃
Heat
自動車用架橋ポリエチレン絶縁耐熱低圧電線 AEX 120℃ Type Symbol resistance
class
■ AVX の絶縁体には鉛化合物を含みません。AEX の絶縁体には Cross-linked PVC insulated heat
resistant low-voltage cables for AVX 100℃
PBDE、PBBs 等の特定臭素系難燃剤を使用しておりません。 automobiles
Cross-linked polyethylene insulated
heat resistant low-voltage cables AEX 120℃
for automobiles
構造 CONSTRUCTION
絶縁体:(AVX)照射架橋塩化ビニル、(AEX)照射架橋ポリエチレン
Insulation : (AVX)Cross-linked PVC、(AEX)Cross-linked polyethylene
導 体:錫めっき軟銅撚り線
Conductor : Tinned annealed copper stranded conductors
導体
(錫めっき軟銅撚り線) 絶縁体 仕上外径 最大導体抵抗
CONDUCTOR INSULATION OUTER DIAMETER MAX. CONDUCTOR
(Tinned annealed copper stranded conductors) RESISTANCE
厚さ
THICKNESS (20℃ )
サイズ 構 成 計算断面積 外 径 標 準 最 大 (m Ω /m)
SIZE CONSTRUCTION CALCULATED NOM. (mm) STANDARD MAX.
(No./mm) AREA DIAMETER (mm) (mm)
(mm2) (mm)
0.5 f 20/0.18 0.5089 1.0 0.5 2.0 2.2 38.6
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
自動車用耐熱電線 AUTOMOBILE CABLES
特 長 DESCRIPTION
■ A VSSX・AESSX は、AVX・AEX の薄肉絶縁タイプで、性 ■ AVSSX/AESSX insulation are thinner than AVX/AEX,
能は AVX・AEX と同等です。 performance are equivalent to AVX/AEX.
■耐熱区分 ■ Heat resistance class
種類 記号 耐熱区分 Heat
Type Symbol resistance
自動車用極薄肉形架橋塩化ビニル絶縁耐熱低圧電線 AVSSX 100℃ class
自動車用極薄肉形架橋ポリエチレン絶縁耐熱低圧電線 AESSX 120℃ Extremely thin wall type cross-linked
PVC insulated heat resistant low- AVSSX 100℃
voltage cables for automobiles
■ A VSSX の絶縁体には鉛化合物を含みません。AESSX の絶縁
Extremely thin wall type cross-linked
体にには PBDE、PBBs 等の特定臭素系難燃剤を使用してお polyethylene insulated heat resistant low- AESSX 120℃
voltage cables for automobiles
りません。
■ Insulation of AVSSX is lead free. Insulation of AESSX do not
use any PBDE or PBBs as flame retardants.
構造 CONSTRUCTION
絶縁体 : (AVSSX)照射架橋塩化ビニル、(AESSX)照射架橋ポリエチレン
Insulation : (AVSSX)Cross-linked PVC, (AESSX)Cross-linked polyethylene
導体:錫めっき軟銅撚り線
Conductor:Tinned annealed copper stranded conductors
導体
(錫めっき軟銅撚り線) 絶縁体 仕上外径 最大導体抵抗
CONDUCTOR INSULATION OUTER DIAMETER MAX. CONDUCTOR
(Tinned annealed copper stranded conductors) RESISTANCE
厚さ
THICKNESS (20℃ )
サイズ 構 成 計算断面積 外径 標 準 最 大 (m Ω /m)
SIZE CONSTRUCTION CALCULATED Nom. DIAMETER (mm) STANDARD MAX.
(No./mm) AREA (mm2) (mm) (mm)
(mm2)
0.3 f 19/0.16 0.3821 0.8 0.3 1.4 1.5 55.9
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
自動車用耐熱電線 AUTOMOBILE CABLES
特 長 DESCRIPTION
■日本自動車技術会規格 JASO D608-92 に合格し、通常の AEX ■ These conform with the Japanese Automotibes Standards
より高温での連続使用に耐えられるものです。 Organization;JASO D608-92 and are superior to ordinary AEX
■耐熱区分 in the continuous use at high temperature.
■ Heat resistance class
記号 耐熱区分
Symbol Heat resistance class
AEX-28 140℃
AEX-28 140℃
AEX-30 150℃
AEX-30 150℃
構造 CONSTRUCTION
絶縁体:照射架橋ポリエチレン
Insulation : Cross-linked polyethylene
導 体:錫めっき軟銅撚り線
Conductor : Tinned annealed copper stranded conductors
導体
(錫めっき軟銅撚り線) 絶縁体 仕上外径 最大導体抵抗
CONDUCTOR INSULATION OUTER DIAMETER MAX. CONDUCTOR
(Tinned annealed copper stranded conductors) RESISTANCE
厚さ
THICKNESS (20℃ )
サイズ 構 成 計算断面積 外 径 標 準 最 大 (m Ω /m)
SIZE CONSTRUCTION CALCULATED NOM. (mm) STANDARD MAX.
(No./mm) AREA DIAMETER (mm) (mm)
(mm2) (mm)
0.5 f 20/0.18 0.5089 1.0 0.5 2.0 2.2 38.6
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
自動車用耐熱電線 AUTOMOBILE CABLES
EEX, EEXS, TEEX, TEEXS HIGH VOLTAGE CABLES FOR ELECTRIC VEHICLES
電気自動車用高圧電線
用 途 APPLICATION
高電圧、大電流による電気自動車(含:HEV、FCEV)の主に動 These cables are used for high voltage and high current circuit in
力回路用として、高い信頼性、低コスト、更に環境対策品である electric vehicles. Also can get high reliability, low cost and
ことを兼ね備えた電線です。 ecological solution.
特 長 DESCRIPTION
■高柔軟性 ■ Flexibility
高い柔軟性を得るために軟銅複合撚線と高柔軟絶縁体を採用し Annealed copper rope-stranded conductor and softer insulation
ています。 material to get high flexibility.
■高耐熱 ■ Heat resistance
絶縁体には JASO 耐熱区分 120℃、シースには同 100℃の特性
Insulation heat resistance class of JASO is 120℃ , sheath is 100℃ .
をもたせています。
■環境対策 ■ Environmentally friendly
絶縁体にハロゲン物質を含まないハロゲンフリー照射架橋ポリ Insulation is halogen free and sheath is lead free PVC.
エチレン、シースには鉛化合物を含まない鉛フリー耐熱塩化ビ ■ Shielding
ニルを採用し、環境負荷を低減しています。 Also available high-density braiding shield for low noise emission.
■シールド
高い放射ノイズ低減効果をもたせた、高密度編組付も対応して
います。
構造 CONSTRUCTION
EEX,TEEX : シールド無し
Non-shield
柔軟導体 絶縁体:ハロゲンフリー照射架橋ポリエチレン
Flexibility Insulation:Halogen free irradiated cross-linked polyethylene
conductor
EEXS,TEEXS : シールド付き
With shield
シース:鉛フリー耐熱塩化ビニル
Sheath:Lead free heat resistant PVC
シールド:高密度編組
Shield:High-density braiding shield
導 体
(軟銅又は錫めっき軟銅撚り線) 絶縁体(ハロゲンフリー照射架橋ポリエチレン)
CONDUCTOR INSULATION
(Annealed copper or tinned annealed copper stranded condcutors) (Halogen free irradiated cross-linked PE)
サイズ
EEX SIZE 構 成 計算断面積 外 径 最大導体抵抗 標準厚さ 外 径
MAX.CONDUCTOR RESISTANCE
CONSTRUCTION CALCULATED NOM. NOM. NOM.
TEEX (No./mm) AREA
(20℃ )(m Ω /m)
DIAMETER めっき無し めっき有り THICKNESS DIAMETER
シールド (mm2) (mm) NON-TINNED TINNED (mm) (mm)
無し 3f 58/0.26 3.08 2.3 6.06 - 0.7 3.7
NON- 5 65/0.32 5.23 3.0 - 3.72 0.8 4.6
SHIELD
8 7/22/0.26 8.18 4.0 - 2.43 0.8 5.6
15 19/9/0.32 13.75 5.3 - 1.44 1.1 7.5
20 19/13/0.32 19.86 6.5 - 0.999 1.1 8.7
編組シールド(錫めっき軟銅線) シース
(鉛フリー耐熱塩化ビニル)
BRAIDING SHIELD SHEATH
(Tinned annealed copper wire) (Lead free heat resistant PVC)
(2014.02)
自動車用耐熱電線 AUTOMOBILE WIRE
EX30 耐熱 150℃電気自動車用高圧電線
HIGH VOLTAGE CABLE FOR ELECTRIC VEHICLE
用 途 APPLICATION
高電圧、大電流による電気自動車(含:HEV, FCEV)の主に動力回 These cables are used for high voltage and high current circuit in
路用として、EEX, TEEX より高い耐熱性を有する電線です。 electric vehicles. Heat resistance is higher than EEX / TEEX.
特 長 DESCRIPTION
■ JASO 耐熱区分:150℃を有し、EEX, TEEX より高温での連 ■ Heat resistance classification of JASO is 150℃ , superior to
続使用に耐えられます。 EEX/TEEX in the continuous use at high temperature.
■この絶縁体には PBDE, PBBs 等の特定臭素系難燃剤を使用し ■ Insulation materials do not use any PBDE or PBBs as flame
ておりません。 retardants.
構造 CONSTRUCTION
照射架橋ポリエチレン絶縁体
Irradiated cross-linked polyethylene insulation
軟銅撚り線
Annealed copper stranded conductors ※シールド付きも対応可能
Shirld type is available
導 体(軟銅線) 絶縁体(照射架橋ポリエチレン)
呼び CONDUCTOR INSULATION
(Annealed Copper Wire) (Irradiated cross-linked polyethylene)
(mm2)
NOMINAL 構 成 計算断面積 外 径 導体抵抗(20℃) 標準厚 仕上外径
SECTIONAL No./mm CALCULATED NOM. CONDUCTOR STANDARD THICK. OUTER
AREA SECTIONAL AREA DIA. RESISTANCE (20℃ ) (mm) DIAMETER
(mm2) (mm) (mΩ /m) (mm)
20f 19/13/0.32 19.86 6.5 0.946 1.1 8.7
30f 19/19/0.32 29.03 7.8 0.647 1.4 10.6
■電線色 color
全てオレンジ色 Orange only
許容電流 PERMISSIBLE CURRENT
TEEX EX30
240 350
許
220
20mm2
300
容
200
30mm
20mm2
電
180
15mm2 250
流
160
20mm22
(A)
140 (A)200
120
8mm2
Permissible current(A)
Permissible current(A)
100 150
5mm 2
80
100
60
40
50
20
0 0
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100120140160
周囲温度(℃) 周囲温度(℃)
Ambient Temperature(℃) Ambient Temperature(℃)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
自動車用耐熱電線 AUTOMOBILE WIRE
イラックス ®® O 自動車用耐燃料低圧電線
FUEL RESISTANT LOW VOLTAGE WIRE FOR AUTOMOBILE
用 途 APPLICATION
耐燃料性が要求されるガソリンタンク内部配線および近接した部 This wire can be used for the application in a fuel tank.
分の配線に適しています。 Especially it is suitable for the lead wires of a fuel pump and the
従来使用されているフッ素系材料に比べ安価であり、経済的に優 lead wires of a fuel level sensor. It's low cost compared with
れております。 fluoroelastomer.
特 長 DESCRIPTION
■耐燃料性 �絶縁体にはガソリン・軽油・ガソホール等の燃料 ■ Fuel resistance � Insulation is our special cross-linked PE
に耐性のある弊社独自の架橋ポリエチレンを照射 by irradiation to get great resistance for
加工したものを用いており、燃料油中での連続使 fuel(gasoline, light oil, gasohole).
用に適しております。 ■ Heat resistance � Heat resistance classification is 100℃ ,
■耐熱性 ��自 動 車 工 業 会 規 格(JASO D608-92)に 基 づ く complied with JASO D608-92.
100 ℃ の 耐 熱 性 を 有 し て お り ま す。
構造 CONSTRUCTION
絶縁体:照射架橋ポリエチレン
Insulation:Irradiated Cross-linked polyethylene
導体:錫めっき軟銅撚り線
Conductor:Tinned annealed copper stranded conductors
項 目 規 格
ITEM SPECIFICATION
耐 熱 性 I 120℃で 168 時間加熱し屈曲後 1000V に 1 分間耐えること。
HEAT RESISTANCE I Heated at 120℃ for 168 hours and bent ; Withstand AC 1000 V for 1min.
耐 熱 性 II 自己径に巻いた試料を 200℃で 30 分間加熱後,絶縁体に亀裂および溶融を生じないこと。
HEAT RESISTANCE II Bent(self-diameter) and heated at 200℃ for 30 min. Not Crack and melt.
低温性 − 45℃で 3 時間冷却し屈曲後,1000V に 1 分間耐えること。
LOW TEMPERATURE RESISTANCE Cooled at − 45℃ for 3 hours and bent ; Withstand AC 1000 V for 1 min.
( a ) ガソリン Gasoline
60℃× 1000 hours
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
機器用電線 DEVICE WIRE
RoHS Directive
Lead
Lead Hg Cd Cr6+
Cr6+ PBB
PBB PBDE
PBDE PVC
PVC Halogen
Free
Free Free
Free Free
Free Free
Free Free
Free Free
Free Free
Free Free※
Free
※:色相により異なります。 Depend on color.
用 途 APPLICATION
優れた耐熱性と高周波特性の点から計算機、測定器類の内部配線 These wires are used as electronic wires for internal wiring of
用電線として最適です。イラックス ® B 電線に比べて柔軟なため、 computers and measuring instruments in terms of the excellent
特に狭い機内配線用電線としておすすめできます。 heat resistance and the high frequency characteristic. These
wires have high utilization value as electronic wires for wiring in
a narrow interior of a machine.
特 長 DESCRIPTION
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance � The insulation is cross-linked by
300 〜 380℃の半田ごてが触れても溶融しにくく irradiation and stable thermally.
なっています。 ■ Electrical property The electrical property, such as high
■電気特性 �高周波特性等の電気性能は通常のポリエチレンと frequency characteristic, etc. is equivalent
同等以上です。 to that of polyethylene.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
抗張力 10MPa 以上
常 温
TENSILE STRENGTH More than 10 MPa
ROOM
伸び 100%以上
TEMPERATURE
ELONGATION More than 100%
機械的性能 残率 80%以上
抗張力
MECHANICAL PROPERTY More than 80%
TENSILE STRENGTH 老化条件 120℃ 96 時間
老化後 (Retention ratio)
AFTER AGING 残率 80%以上 120℃ and 96 hours of aging
伸び conditions
More than 80%
ELONGATION
(Retention ratio)
半田付性 250℃ 1 分間不溶
SOLDERING PROPERTY Not melt at 250℃ for
耐熱性 1 minute
HEAT RESISTANCE 連続使用温度 電気用品安全法による
CONTINUOUS WORKING 90℃ With the Electrical Appliance
TEMPERATURE and Material Safety Law.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
機器用電線 DEVICE WIRE
用 途 APPLICATION
このケーブルは機器の接続、内部配線、給電線などとして− 30 〜+ These cables are used in the temperature range of − 30℃ to +
60℃の温度範囲で使用できます。 60℃ as connection of devices, internal wiring, transmission line, etc.
特 長 DESCRIPTION
■耐熱性 ��絶縁体は照射架橋されており熱的に安定なため、 ■ Heat resistance � The insulation is cross-linked by
300 〜 380℃の半田ごてが触れても溶融しにくく irradiation and stable thermally.
なっています。 ■ Electrical property The characteristic impedance variation in
■電気特性 �長さ方向の特性インピーダンスの変動が少なく安 the longitudinal direction is less.
定しています。
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
絶縁体
Insulation
外部導体 外 被
External conductor Jacket
SUMITOMO 品名
(NAME)
内部導体
Inner Conductor
ACu 7/0.18 1.64 2.14 0.43 3.00 灰 0.30 1000 50 ± 3 105 ± 5 106
1.5D-XVS
Gray
黒
1.5C-XVS ACu 7/0.10 1.68 2.18 0.41 3.00 1 1000 75 ± 3 69 ± 4 99
Black
1000
1.5D-XVS
700
500
400
300
200
Attenuation(dB/km)
減衰量(dB/km)
1.5C-XVCS
100
70
50
40
30
20
10
1 3 10 30 100 200 1000
周波数(MHz)
Frequency(MHz)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
機器用電線 DEVICE WIRE
鉛フリー LVCX 高周波同軸ケーブル LEAD FREE LVCX HIGH FREQUENCY COAXIAL CABLE
RoHS Directive
Lead
Lead Hg Cd Cr6+
Cr6+ PBB
PBB PBDE
PBDE PVC Halogen
Free
Free Free
Free Free
Free Free
Free Free
Free Free
Free Free Free
用 途 APPLICATION
通信基地局の内部配線および車載用ケーブル(ETC、GPS、衛 Intemal wiring for communication base station and automobiles
星ラジオ、地上波デジタル TV)として使用できます。 (ETC , GPS , satellite radio and digital terrestrial television)
特 長 DESCRIPTION
(1)微細均一発泡による長さ方向の特性安定化 (1)Characteristic stabilization by fine uniform forming
(2)低 tanδ発泡材料開発による低損失化 (2)Developing low tanδ insulation material to achieve loss reduction
(3)照射架橋技術による高耐熱化 (3)High heat resistance property by irradiation technology
(4)ハロゲンフリー対応も可能 (4)Harogen free insulation is available
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
内部導体
Inner conductor
金属テープ縦添え
Tape wrapping single braid
SUMITOMO 品名
(NAME)
編 組 外 被
Braid Jacket
低損失発泡絶縁
Foamed insulation with low loss
50 Ω系 75 Ω系
0.0 0.0
0.1
0.5
0.75dB/m
0.75 dB/m 0.2
1.0 1.08dB/m
1.08 dB/m 1.29 dB/m
1.29dB/m
減衰量(dB/m)
減衰量(dB/m)
0.3
2.5DS-GXC(3.8)
1.5 0.4
1.84dB/m
1.84 dB/m 0.45 dB/m
0.45dB/m
1.5DS-GXC-SP 0.5
1.75
1.75dB/m
dB/m
2.0 0.60dB/m
0.60 dB/m
0.6
0.59 dB/m
0.59dB/m
2.5 0.7 1.5CS-GXC
0.8 0.77dB/m
0.77 dB/m
3.0
3.19dB/m
3.19 dB/m 1.5D-2V相当 0.9 1.5C-2V相当
3.5 1.0
2400 MHz 5800 MHz 470 MHz 770 MHz
0 1000 2000 3000 4000 5000 6000 0 200 400 600 800 1000
周波数(MHz) 周波数(MHz)
構造 CONSTRUCTION
内部導体 絶縁体 外部導体 外被
INNER CONDUCTOR INSULATION EXTERNAL CONDUCTOR JACKET
品名
NAME 材質 構成 外径 材質 外径 材質 構成 材質 外径
MATE- No./mm NOM.DIA MATERIAL NOM.DIA MATERIAL COMPOSITION MATERIAL NOM.DIA
RIAL (mm) (mm) (mm)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
電気性能 ELECTRICAL PROPERTIES
品名 標準静電容量 特性インピーダンス 標準減衰量
NAME NOM. CHARACTERISTIC NOM.ATTENUATION(dB/m)
CAPACITANCE IMPEDANCE
(pF/m) ( Ω ) (TDR)
■品名 ■ NAME
(例) (EX.)
1.5 D S - G X C 1.5 D S - G X C
① ② ③ ④ ⑤ ⑥ ① ② ③ ④ ⑤ ⑥
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
INDEX
第 6 章 情報機器用電線
Section 6 Electronic Wire for
Mobile Communication Device
ページ
Page
LVCX シリーズ 広帯域同軸ケーブル(GHz 帯域対応)
6-1
LVCX SERIES HIGH FREQUENCY(GHz) COAXIAL CABLE
極細同軸ケーブル(MFCX)
6-2
MICRO FLEX COAXIAL CABLE
極細 2 心平行ケーブル
6-3
MINIATURE TWIN COAXIAL CABLE
UL STYLE 1516,10064 フッ素樹脂絶縁電線
6-4
UL STYLE 1516,10064 FLUOROPOLYMER INSULATED WIRE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
ELECTRONIC WIRE FOR MOBILE COMMUNICATION DEVICE
用 途 APPLICATION
アンテナ用(無線 LAN 等)として使用できます。 Antenna feeder wiring (wireless LAN etc.).
特 長 DESCRIPTION
■フッ素樹脂により均一な絶緑構造を形成し、広帯域に渡って ■ Fluorine resin used for insulation equally in the longitudinal
VSWR が安定します。 direction, the LVCX cables have low VSWR for wideband
■更に細経化した製品、低 Loss の製品も開発中です。詳しくは frequencies.
お問い合わせ下さい。 ■ Futher miniturization and low loss is possible upon reguest.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
内部導体
減衰量ー周波数特性
Innner conductor
AttenuationーFrequency Characterstic
10000
0.8DS-PBA
0.7DS-PBA(TA)
Attenuation (dB/km)
0.4DS-PBA-H
減衰量(dB/km)
1000
編 組 外 被
Braid Jacket
絶縁体
100
Insulation 100 1000 10000
周波数(MHZ) Frequency (MHZ)
構造 CONSTRUCTION
内部導体 絶縁体 外部導体 外被
INNER CONDUCTOR INSULATION EXTERNAL CONDUCTOR JACKET
品 名 材 質 構 成 外 径 材 質 外 径 材 質 構 成 材 質 外 径
NAME MATERIAL No./mm NOM. MATERIAL NOM. MATERIAL COMPOSITION MATERIAL NOM.
DIA. DIA. DIA.
(mm) (mm) (mm)
電気特性 ELECTRICAL PROPERTY
標準静電容量 標準特性インピーダンス 標準減衰量
品 名 NOM. CAPACITANCE NOM. IMPEDANCE NOM. ATTENUATION (dB/m)
NAME (pF/m) ( Ω ) (TDR)
0.9 GHz 1.5 GHz 2.0 GHz 2.4 GHz 6 GHz
0.4DS-PBA 2.5 3.6 4.2 4.7 7.6
0.7DS-PBA 95 50 1.8 2.3 2.8 3.1 5.1
0.8DS-PBA 1.4 1.9 2.1 2.4 3.9
■品 名 ■ Naming
(例)0.8 D S − P B A (ex)0.8 D S − P B A
◯
1 ◯2 ◯
3 ◯4 ◯
5 ◯
6 ◯1 ◯
2 ◯3 ◯
4 ◯5 ◯
6
◯1 :絶縁外径(mm) ◯1 :Outer diameter of insulation(mm)
◯
2 :特性インピーダンス(D…50 Ω) ◯
2 :Impedance(D…50 Ω)
◯
3 :中心導体構造(S…撚線) ◯
3 :Construction of inner conductor(S…Stranded conductor)
◯
4 :絶縁材料(P…FEP) ◯
4 :Insulation material(P…FEP)
◯
5 :B…一重編組 ◯
5 :B…Single braid
◯
6 :A…PFA 外被 ◯
6 :A…PFA jackt
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
ELECTRONIC WIRE FOR MOBILE COMMUNICATION DEVICE
用 途 APPLICATION
ノート PC、携帯電話、DSC、FPD 等の LCD 接続用ケーブル Internal wiring for LCD connection of notebook PCs, mobile
phones, digital cameras, flat panel displays and so on.
特 長 DESCRIPTION
■高導電率、高強度導体の採用による優れた伝送特性、機械特性。 ■ Excellent transmission and mechanical properties by adapting
■ 40C バンドル状態でも、外径が 3mm φ以下と非常に細径、省 high conductivity and breaking-force conductor.
スペース。 ■ Extremely small diameter and space-saving, achieving less than
■各心がシールド構造故(オプションで 2 重遮蔽も可能)、ノイ 3 mm φ when 40 cables are bundled with wrapping tape.
ズ対策が不要もしくは簡便。 ■ Excellent EMI properties for bundled cable due to individually
■各種極細同軸用コネクタに適合、納入実績多数。 shielded wires (double shielding is optional).
■ハーネス加工品での対応も可能。 ■ Can be terminated with various types of connectors.
(用途によっては、ハーネス加工品のみの対応となります。
) ■ Cable assembly is available in accordance with customer`s
■更に細径化した製品も開発中です。詳しくはお問い合わせ下さい。 specifications.
■ Futher miniturization is possible upon request.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体
Conductor
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
ELECTRONIC WIRE FOR MOBILE COMMUNICATION DEVICE
用 途 APPLICATION
ノート PC、FPD 等の高速差動伝送用(LVDS, TMDS)接続ケー High speed differential transmisson lines, such as LVDS and
ブル TMDS for notebook PCs, FPD and so on.
特 長 DESCRIPTION
■高速差動信号伝送用として標準化されている LVDS、TMDS ■ Suitable for very high speed differential transmission line such
方式の接続に最適。 as LVDS and TMDS.
■高導電率、高強度導体の採用による優れた伝送特性、機械特性。 ■ Excellent transmmission and mechanical properties by adapting
■銅蒸着 PET +一括遮蔽構造による優れた遮蔽特性。 high conductivity and breaking-force conductor.
■ Excellent EMI properties due to copper-coated PET plus
overall shielding construction.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体
Conductor 外 被
横巻シールド Jacket
Spiral shield
絶縁体
Insulation
構造/性能 単位 AWG40
Construction/Properties UNITS DS (Double spiral shield) BS (Braiding shield)
中心導体抵抗(最大)
ohm/m 5.0
MAX. CONDUCTOR RESISTANCE
外部シールド抵抗(標準)
ohm/m 0.4 0.5
NOM. SHIELD RESISTANCE
特性インピーダンス(標準)
NOM. CHARACTERISTIC IMPEDANCE@ ohm 100
TDR
減衰量@ 1GHz(標準)
dB/m 5.5
NOM. ATTENUATION @1GHz
最大許容電流
A 0.3
MAX. PERMISSIBLE CURRENT
伝播遅延時間(標準)
ns/m 4.7
NOM. PROPAGATION DELAY
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
ELECTRONIC WIRE FOR MOBILE COMMUNICATION DEVICE
PVC XLPVC XLPE OTHERS Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
配線スペースの狭い電子機器・モバイル機器の内部配線に適して Internal wiring (narrow space) of electronic equipment; mobile
います。 equipment and small electronic equipment.
特 長 DESCRIPTION
■フッ素樹脂により伝送特性、機械特性に優れている。 ■ Excellent transmission and mechanical properties by using
■耐熱性に優れている。 fluorine resin for insulation.
■ Excellent heat resistance.
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
導 体 絶縁体
Conductor Insulation
※本製品は一次電源回路のリード線には適さない場合がございますので、機器の適用規格をよくご確認下さい。
※ This product is not suitable for primary power supply circuit in some cases. Please confirm applicable standard of your product.
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
第 7 章 フラットコンポーネント
Section 7 Flat Component INDEX
ページ
Page
スミカード ®
7-1
SUMI-CARD™
金めっきスミカード
7-4
Au-PLATING SUMI-CARD
シールドスミカード
7-8
SHIELDED SUMI-CARD
金めっきシールドスミカード
7-11
Au-PLATING SHIELDED SUMI-CARD
高周波対応スミカード
7-14
SUMI-CARD for high frequency
高温高湿対応スミカード
7-17
SUMI-CARD for high temparature, high humidity
高定格ハロゲンフリースミカード
7-20
High rating halogen-free Sumi-Card
ジャンパーリード
7-
JUMPER LEAD
タブリード
7-
TAB-LEAD
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
スミカード ®® スミカード ®
SUMI-CARD™
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
用 途 APPLICATION
・FPD・DVD・プリンター・スキャナー・ゲーム機・ノート PC、 ・SUMI-CARD™ is used for internal wiring of electronic equipment,
他の内部配線。 FPD, DVD, game machine,notebook PC, printer, scanner and so
on.
特 長 DESCRIPTION
・薄く、フレキシブルかつ軽量で機器の小型・軽量化に対応 ・Efficient downsized wiring system
・コネクタとの挿抜が容易で誤配線を防止でき、補修が可能 ・Insulation thickness is thin
・定格 30V・80℃から 300V・105℃まで各種 UL 規格を取得 ・Easy to connect, prevent mis-wiring
・難燃グレードは全て UL 規格 VW-1 に合格 ・Rating voltage 30 V, rating temperature 80℃〜
rating voltage 300 V, rating temperature 105℃
・The vertical flame retardant test based on UL VW-1
構造および性能 CONSTRUCTION&TYPICAL PROPERTIES
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD SML2XCD
SYMBOL NAME
標準 錫めっき軟銅箔(めっき厚 1 μ m 以上)
導 体 STANDARD Tinned copper (Thickness of tin plating:Min.1 μ m)
CONDUCTOR SNT2 錫めっき軟銅箔(めっき厚 0.4+0.2/-0.1 μ m( 純錫厚 0.1 ± 0.1 μ m))
ウィスカ対策品 ANTI-WHISKER Tinned copper (Thickness of tin plating:0.4+0.2/-0.1 μ m, pure tin plating:0.1 ± 0.1 μ m)
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 難燃ポリエステル系 架橋ポリオレフィン
INSULATION ADHESIVE LAYER Frame-Retardant Polyester Cross-Linked Polyolefin
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
性 能(例) PROPERTIES (EXAMPLES)
製品区分略号
SML2CD SML2XCD
SYMBOL NAME
UL スタイル No. 2896 20783
UL STYLE No.
サイズ
0.035 × 0.8 mm 0.035 × 0.8 mm
導体 NOMINAL DIMENSION
CONDUCTOR ピッチ
1.25 mm
PITCH
難燃性 VW‐1 合格
FLAME TEST VW‐1 PASS
導体抵抗 750 Ω /km 以下 750 Ω /km 以下
CONDUCTOR RESISTANCE Max. 750 Ω /km Max. 750 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω -m
AC500V-1 分 AC2,500V-1 分
耐電圧(隣接導体間) 絶縁破壊無し 絶縁破壊無し
DIELECTRIC STRENGTH AC500V-1min AC2,500V-1min
(Between Adjacent Conductors) No Dielectric Breakdown No Dielectric Breakdown
15mmR,1,000 回 / 分 ,25mm 5mmR,700 回 / 分 ,20mm
往復摺動 1,500 万回以上 50 万回以上
摺動試験 SLIDING TEST 15mmR,1,000 cycles/min,25mm 5mmR,700 cycles/min,20mm
FLEXING TEST Min. 15,000,000 cycles Min. 500,000 cycles
180°折り重ね屈曲 100 回以上 50 回以上
FOLDING TEST Min. 100 cycles Min. 50 cycles
φ 0.5mm, 600g 摩耗強度 10,000 回以上
φ 0.5mm,600 g ABRASION TEST Min. 10,000 cycles
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL スタイルと適用品種 UL STYLE No. AND PRODUCTS
導体厚 仕上厚 導体間ピッチ
CONDUCTOR CABLE PITCH (P)
UL スタイル No. UL 定格
THICKNESS THICKNESS (mm)
UL STYLE No. UL Rating
製品区分略号 (B) (T)
SYMBOL NAME (mm) (mm) 1.25 1.0 0.5
0.05 0.20 ○ ○ △
2896 80℃、30 V
0.035 0.18 ○ ○ △
2896
80℃、30 V 0.035 0.11 ○ ○ ○
薄肉タイプ Thin type
0.05 0.20 ○ ○ △
SML2CD 20624 80℃、60 V
0.035 0.18 ○ ○ ○
0.05 0.16 ○ ○ △
20861 105℃、60 V
0.035 0.14 ○ ○ ○
21147 0.05 0.14 ○ ○ ○
80℃、60 V
ハロゲンフリー Halogen Free 0.035 0.12 ○ ○ ○
0.05 0.20 ○ ○ ×
20783 105℃、300 V
0.035 0.18 ○ ○ ×
SML2XCD
0.05 0.18 × × ○
20941 105℃、90 V
0.035 0.16 × × ○
○:標準品 △:特殊仕様 ×:製造不可
○:Sumitomo Standard △:Special Specification ×:Unavailable
公称寸法 NOMINAL DIMENSION
単位 Unit:mm
項 目 寸 法
ITEM DIMENSION
導体間ピッチ
1.25 1.0 0.5
PITCH (P)
導体巾
0.80 0.70 0.60 0.30
CONDUCTOR WIDTH (A)
マージン巾
0.85 0.65 0.70 0.35
MARGIN WIDTH (M)
トータルピッチ P × (n − 1) n =導体数
TOTAL PITCH (TP) n = number of conductors
仕上巾
P × (n + 1)
CABLE WIDTH (W)
絶縁長 20 以上任意 (P1.25,P1.0 の AD タイプは 30 以上 )
INSULATION LENGTH (I) Min. 20 (P1.25,P1.0 AD type:Min30)
端末厚
0.30
TERMINAL THICKNESS (TT)
ストリップ長
4, 5, 6
STRIP LENGTH (S)
補強テープ長 6, 8, 10, 15, 20
SUPPORTING TAPE LENGTH (H)
D SML2CD・SML2XCD SML2CD-NZ
S I S S I S S I S
M
M
TP
TP
P
P
W
絶縁体 導体 絶縁体
A
導体 絶縁体 導体
onductors Insulation Conductors Insulation P0.5:0.7±0.3 Conductors Insulation
絶縁体 絶縁体 導体 P1.0:0.8±0.5 絶縁体
導体 Insulation Insulation 導体
Insulation Conductors Conductors
T T T Conductors
B
TT
TT
H 補強テープ H H 補強テープ H H H
補強テープ
Supporting tape Supporting tape Supporting tape
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
品名呼称 NOMENCLATURE
− n × I − × (BL)− P −S − UL
製品区分略号
Symbol name 導体間ピッチ
Pitch
芯数
Number of conductors
ストリップ長 ULスタイルNo.
絶縁長 Strip length UL Style No.
Insulation length
加工形態
Processing form
特殊記号
Special processing form
補強テープ長 ①加工関係 Processing K :特殊加工 Special processing
Supporting tape length ②絶縁体関係 Insulation M :ULマーキングあり UL marking
B :絶縁体色黒 Black color
F :薄肉 Thin type
補強テープ色 HF :ハロゲンフリー Halogen Free
Supporting tape color ③導体関係 Conductor T :導体巾0.8mm Conductor width 0.8mm
T(0.6) :導体巾0.6mm Conductor width 0.6mm
N :導体厚0.05mm Conductor thickness 0.05mm
N(35) :導体厚0.035mm Conductor thickness 0.035mm
SNT2 :ウィスカー対策 Anti-Whisker
④その他 Other NZ :NON-ZIFコネクタ対応端末構造
NON-ZIF connector type
加工タイプ PROCESSING FORM
BD AD ES
両端末同じ方向に補強テープ 両端末逆方向に補強テープ 片端補強テープ、片端導体露出(サヤ残し加工を含む)
Supporting tapes at both ends are Supporting tapes at both ends are Supporting tapes at one end,
製品区分略号 on the same side on the opposite side and the other end is stripped for
soldering(including semi-strip type)
SYMBOL NAME
SML2CD
SML2XCD
SML2CD-NZ
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
金めっきスミカード 金めっきスミカード
Au-PLATING SUMI-CARD
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
用 途 APPLICATION
・FPD・DVD・ プ リ ン タ ー・ ス キ ャ ナ ー・ ゲ ー ム 機・ ノ ー ト ・Au-PLATING SUMI-CARD is used for internal wiring of
PC、他の内部配線。 electronic equipment, FPD, DVD, game machine,notebook PC,
printer, scanner and so on.
特 長 DESCRIPTION
・鉛フリー対応製品 ・Lead-Free product
・ウィスカ発生による短絡事故を防止可能 ・Enables to prevent a short circuit caused by "whisker"
・従来製品(錫めっき品)と同等性能を維持 ・Maintains the performance equaled to the conventional (tinned)
products
構造 CONSTRUCTION
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 AUP タイプ
PRODUCT TYPE AUP type
材 質 軟銅箔
MATERIAL Annealed copper
めっき(全体) ニッケルめっき
PLATING(whole length) Nickel Plating
AUP AUPT
厚み
導 体 THICKNESS 0.3 μ m 以上
CONDUCTOR Min. 0.3 μ m
めっき(端末部) 金めっき
PLATING(terminal) Au Plating
AUP AUPT
厚み
THICKNESS 0.05 μ m 以上 0.15 μ m 以上
Min. 0.05 μ m Min. 0.15 μ m
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 難燃ポリエステル系
INSULATION ADHESIVE LAYER Frame-Retardant Polyester
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 AUP3 タイプ
PRODUCT TYPE AUP3 type
材 質 軟銅箔
MATERIAL Annealed copper
ニッケルめっき
Nickel Plating
0.03 μ m 以上 0.08 μ m 以上
Min. 0.03 μ m Min. 0.08 μ m
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 難燃ポリエステル系
INSULATION ADHESIVE LAYER Frame-Retardant Polyester
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
0.05 0.13 × △
20706
SML2CD 105℃、60 V
ハロゲンフリー(HF)
0.035 0.11 ○ ○
(2014.02)
性 能(例) PROPERTIES(EXAMPLES)
構 成
DETAIL
UL スタイル No.
2896 20861
UL STYLE No.
サイズ
0.035 × 0.3 mm 0.05 × 0.7 mm
導体 NOMINAL DIMENSION
CONDUCTOR ピッチ
0.5 mm 1.0 mm
PITCH
難燃性 VW‐1 合格
FLAME RETARDANT UL VW‐1 Pass
導体抵抗 2,200 Ω /km 以下 600 Ω /km 以下
CONDUCTOR RESISTANCE Max. 2,200 Ω /km Max. 600 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω -m
耐電圧(隣接導体間) AC500V-1 分
DIELECTRIC STRENGTH 絶縁破壊無し
AC500V-1min
(Between Adjacent Conductors) No Dielectric Breakdown
公称寸法 NOMINAL DIMENSION
単位 Unit:mm
項 目 仕 様
ITEM DIMENSION
導体間ピッチ
0.5 1.0
PITCH (P)
導体幅
0.30 0.70
CONDUCTOR WIDTH (A)
マージン幅
0.35 0.65
MARGIN WIDTH (M)
トータルピッチ n= 導体数
P × (n − 1) n=number of conductors
TOTAL PITCH (TP)
仕上幅 n= 導体数
P × (n + 1) n=number of conductors
CABLE WIDTH (W)
絶縁長 20 以上任意 30 以上任意
INSULATION LENGTH (I) Min. 20 Min. 30
全 長 650mm 以下 / 650mm 超は要相談
CABLE LENGTH (L) MAX. 650 mm / Negotiable if over 650mm
端末厚
0.30 ± 0.05
TERMINAL THICKNESS (TT)
剥離長
4, 5, 6
STRIP LENGTH (S)
補強テープ長
6, 8, 10
SUPPORTING TAPE LENGTH (H)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
品名呼称 NOMENCLATURE
SML2CD − n × I − × − P −S − − UL
製品区分略号
Symbol name
芯数 導体間ピッチ めっきタイプ
Number of conductors Pitch Plating type
絶縁長 ストリップ長
Insulation length Strip length
加工形態
Processing form ULスタイルNo.
※2 特殊記号 UL Style No.
Special processing form
補強テープ長
Supporting tape length
※1 青色のときBL Blule ; BL
加工タイプ PROCESSING FORM
BDタイプ ADタイプ
BD type AD type
ES
片端補強テープ、
両端末同じ方向に補強テープ 両端末逆方向に補強テープ (
Supporting tapes at both ends Supporting tapes at both ends
are on the same side are on the opposite side
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
シールドスミカード シールドスミカード
SHIELDED SUMI-CARD
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
用 途 APPLICATION
・FPD・ゲーム機・DVD・ノート PC 等ノイズ対策を必要とする ・SHIELDED SUMI-CARD is used for internal wiring of
製品の機内配線。 electronic equipment, FPD, game machine, DVD, notebook PC
in which need shielding measures.
特 長 DESCRIPTION
・薄く、フレキシブルかつ軽量で機器の小型・軽量化に対応 ・Efficient downsized wiring system
・スミカード ® 同様ワンタッチでコネクタへの脱着可能 ・Insulation thickness is thin
・可動部での使用も可能 ・Easy to connect
・Flexible SML2SC is available for moving parts
構造 CONSTRUCTION
項 目 構 成
ITEM DETAIL
製品区分略号
SML2SC
SYMBOL NAME
導 体 錫めっき軟銅箔(めっき厚 1 μ m 以上)
CONDUCTOR Tinned copper (Thickness of tin plating:Min.1 μ m)
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 難燃ポリエステル系
INSULATION ADHESIVE LAYER Flame-Retardant Polyester
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
シールドテープ 材質 PET(外層)+金属層+銀コート銅(内層)
SHIELD TAPE MATERIAL PET (Outer) + Metalic Layer + Copper Coated with Silver (Inner)
保護テープ 材質 ポリイミド(外層)+接着剤(内層)
REINFORCING TAPE MATERIAL Polymide (outside)+Adhesive(inside)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
性 能(例) PROPERTIES (EXAMPLES)
< UL2896 薄肉タイプ THIN TYPE >
項 目 構 成
ITEM DETAIL
サイズ
0.035 × 0.3 mm
導体 NOMINAL DIMENSION
CONDUCTOR ピッチ
0.5 mm
PITCH
難燃性 VW‐1 合格
FLAME TEST VW-1 Pass
導体抵抗 2,200 Ω -km 以下
CONDUCTOR RESISTANCE Max. 2,200 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω /m
AC500V-1 分
隣接導体間
絶縁破壊無し
BETWEEN ADJACENT
AC500V-1min
耐電圧 CONDUCTORS
No Dielectric Breakdown
DIELECTRIC
STRENGTH AC250V-1 分
導体/シールド間
絶縁破壊無し
CONDUCTORS /
AC250V-1min
SHIELD
No Dielectric Breakdown
静電容量 624 pF/m
CAPACITANCE (参考値/ Ref.)
15mmR,1,000 回 / 分 ,25mm
往復摺動 1,500 万回以上
摺動試験 SLIDING TEST 15mmR,1,000 cycles/min,25mm
FLEXING TEST Min.15,000,000 cycles
180°折り重ね屈曲 30 回以上
FOLDING TEST Min. 30 cycles
φ 0.5mm, 600g 摩耗強度 200 回以上
φ 0.5mm, 600 g ABRASION TEST Min. 200 cycles
静電シールド効果 SHIELDING EFFECT
0.1MHz 0.5MHz 1MHz 5MHz 10MHz 静電シールド効果(dB) Shielding Effect(dB)
120 SML2CD-P1.25
SML2CD-P1.25 69.4 55.2 48.7 34.4 28.2 SML2SC-P1.25
SML2CD-P0.5
100 SML2SC-P0.5
SML2SC-P1.25 96.5 82.2 76.4 61.4 55.6
80
SML2CD-P0.5 75.2 60.8 55.7 40.6 34.9
60
SML2SC-P0.5 104.2 90.3 81.7 70.4 56.5
(dB) 40
※記載の値は、測定値の一例であり、保証値ではありません。
※ The figures shown on the charts are example of measurements for reference, not 20
guaranteed value.
0
0.1 0.5 1 5 10
周波数(MHz) Frequency( MHz)
(2014.02)
公称寸法 NOMINAL DIMENSION
単位 Unit:mm
項 目 仕 様
ITEM DIMENSION
導体間ピッチ
1.25 1.0 0.5
PITCH (P)
導体巾
0.80 0.70 0.30
CONDUCTOR WIDTH (A)
マージン巾
0.85 0.65 0.35
MARGIN WIDTH (M)
トータルピッチ n= 導体数
P × (n − 1) n=number of conductors
TOTAL PITCH (TP)
仕上巾 P × (n + 1)
CABLE WIDTH (W)
20 以上任意
絶縁長 (P1.25, P1.0 の AD タイプは 30 以上)
INSULATION LENGTH (I) Min.20
(P1.25, P1.0 AD type : Min.30)
端末厚
0.30
TERMINAL THICKNESS (TT)
ストリップ長
3,4,5
STRIP LENGTH (S)
補強テープ長 ストリップ長+ 2mm(以下)
SUPPORTING TAPE LENGTH (H) Strip length + Max. 2mm
S I S
保護テープ
Reinforcing tape 導体
M
Conductors
B
P
TT
TP
(S)(G)(S)(S)(S)(G)(S)
W
T (S):信号線 (G):グランド線
H H Signal Ground
絶縁体
A
Insulation
シールドテープ
導体 シールドテープ 保護テープ Shield tape
Shield tape Reinforcing tape 補強テープ
Conductors
Supporting tape
※グランド配列位置は仕様面で制約がございます。
※ Because there is limitation on specifications, please confirm a combination of ground pin assignment, strip length and supporting tape length
with our sales office.
品名呼称 NOMENCLATURE
加工タイプ PROCESSING FORM
BD AD ES
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
×
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
保存
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
金めっきシールドスミカード 金めっきシールドスミカード
Au-PLATING SHIELDED SUMI-CARD
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
金めっきスミカードに新グランド接続方式のシールド構造を付加 Added the shield function to Gold plated SUMI-CARD which has
し、“EMI 対策”、” ウィスカ対策” を両立させたフラットケーブ an excellent whisker preventive effect.
ルです。
用 途 APPLICATION
・FPD・ゲーム機・DVD・ノート PC 等、ノイズ対策を必要とす ・SHIELDED SUMI-CARD with Au plated is used for internal
る製品の機内配線。 wiring of electronic equipment, FPD, game machine, DVD,
notebook PC.
特 長 DESCRIPTION
・“EMI 対策” と “ウィスカ対策” を両立 ・Compatible both shield structure for measure against EMI and
・グランド線−シールドテープ間を接続することにより、EMI 特 gold plated on the terminal for measure against whisker.
性を強化 ・We have developed new connection structure between shield
・高屈曲性であり、摺動部にも使用可能 material and GND conductor which will be able to locate
anywhere you want.
・SHIELDED SUMI-CARD with gold plated has a high bending
characteristic which is suitable for sliding use.
構造 CONSTRUCTION
項 目 構 成
ITEM DETAIL
製品区分略号
SML2SC
SYMBOL NAME
材 質 軟銅箔
MATERIAL Annealed copper
サイズ 0.035mm 厚× 0.3mm 巾
導 体 SIZE t:0.035mm × w:0.035mm
CONDUCTOR 全体:ニッケルめっき(厚み:0.3 μ m 以上)
めっき Whole:Nickel (Thickness:min.0.3 μ m)
PLATING 末端部:金めっき(厚み:0.05 μ m 以上)
Terminal:Gold (Thickness:min.0.05 μ m)
材 質 ポリエステル(接着層:難燃ポリエステル系接着剤)
絶縁体 MATERIAL Polyester (Adhesive layer:Flame-retardant polyester adhesive)
INSULATION 色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
シールドテープ PET(外層)+金属層+導電性フィラー(内層)
SHIELD TAPE PET(Outer) + Metallic layer + Copper coated with Silver(Inner)
PPS +粘着剤
UL 2896,20861
GND 加工部絶縁テープ PPS/Adhesive
INSULATION FOR GND ポリイミド+粘着剤
UL 21147
Polyimide/Adhesive
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL スタイルと適用品種 UL STYLE No. AND PRODUCTS
ワイヤリングハーネス(UL 認定番号 E66078 となります) WIRING HARNESS (UL Approved Number E66078)
導体厚 仕上厚
製品区分略号 UL スタイル No. UL 定格
CONDUCTOR THICKNESS CABLE THICKNESS
SYMBOL NAME UL STYLE No. UL RATING (mm) (mm)
性 能 PROPERTIES
項 目 性 能
ITEM SPEC
UL スタイル No.
UL2896 UL20861 UL21147
UL STYLE No.
導体抵抗 2,200 Ω /km 以下
CONDUCTOR RESISTANCE Max. 2,200 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω -m
AC500V-1 分
隣接導体間
絶縁破壊無し
BETWEEN ADJACENT
AC500V-1min
耐電圧 CONDUCTORS
No Dielectric Breakdown
DIELECTRIC
STRENGTH AC250V-1 分
導体/シールド間
絶縁破壊無し
CONDUCTORS /
AC250V-1min
SHIELD
No Dielectric Breakdown
静電容量 579 pF/m 501 pF/m 552 pF/m
CAPACITANCE (参考値/ Ref.) (参考値/ Ref.) (参考値/ Ref.)
難燃性 UL 垂直難燃試験合格(VW‐1)
FLAME TEST VW-1 Pass
180°折り重ね屈曲(自己径屈曲) 30 回以上 ※グランド加工部以外
FOLDING TEST Min. 30 times *Excluding the ground processing
往復摺動 1,500 万回以上(摺動半径 15mmR) ※グランド加工部以外
SLIDING TEST Min. 15million times (15mmR) *Excluding the ground processing
EMI 特性 EMI
磁界強度 (dBuV)
Magnetic field strength
(dBuV)
100
金めっきFFC
Au-plating FFC
90 金めっきシールドFFC
Au-plating shielded FFC
80
70
60
50
Better
40
50 150 250 350
周波数 (MHz)
Frequency(MHz)
※測定データは参考値です。
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。 ご検討の際には実機での御評価をお願い致します。
※ This specification is subject※The abovewithout
to change data isafor reference.
prior Please evaluate EMI fully if EMI suits your products.
announcement.
(2014.02)
公称寸法 NOMINAL DIMENSION
単位 Unit:mm
項 目 仕 様
ITEM DIMENSION
導体間ピッチ
0.5
PITCH (P)
導体巾
0.3
CONDUCTOR WIDTH (A)
トータルピッチ n= 導
体数 P × (n − 1)
TOTAL PITCH (TP)
仕上巾 P × (n + 1)
CABLE WIDTH (W)
マージン巾 0.35
MARGIN WIDTH (M)
端末厚
0.3
TERMINAL THICKNESS (TT)
ストリップ長 標準 3 , 4 , 5
STRIP LENGTH (S) Standard 3 , 4 , 5
補強テープ長 標準 5 , 6 , 7
SUPPORTING TAPE LENGTH (H) Standard 5 , 6 , 7
絶縁長 BD タイプ 55 以上 AD タイプ 70 以上
INSULATION LENGTH (I) BD type Min.55 AD type Min.70
全 長 650 以下
CABLE LENGTH (L) Max.650
グランド位置・本数 グランド位置:任意 グランド本数:4 本以下
GROUND ROCATION / NUMBER Ground rocation:anywhere Ground number:Max 4
シールド-グランド線接触部
Shield-GND conductor connecting
M
P
W TP
シールドテープ GND加工部絶縁テープ
Shield tape Insulation for GND
導体めっき(Au) 導体めっき(Au)
Plating(Au) Plating(Au)
シールドテープ
Shield tape 導体
Conductors 導体
FFC絶縁体 Conductors
Insulation of FFC
S T FFC絶縁体
導体めっき(Au) Insulation of FFC
TT Plating(Au)
ニッケルめっき
Nickel plating
品名呼称 NOMENCLATURE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
高周波対応スミカード 高周波対応スミカード
SUMI-CARD for high frequency
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
高周波対応スミカードは、AV 機器内部配線向け端子間ピッチ SUMI-CARD for high frequency is Flexible Flat Cable harness for
0.5mm のフレキシブルフラットケーブルハーネスです。高速伝送 internal wiring in AV equipment. This product achieves a good
規格で要求されるインピーダンスコントロール性能を併せ持つシ balance between Noise suppression and Impedance control by
ールドスミカードの派生製品で、一般用途向け金めっきスミカー derivative technology of SHIELD SUMI-CARD. Type Ⅰ is based on
ドをベースとする Type Ⅰと、信号伝送品質を重視した Type Ⅱ a gold-plated SUMI-CARD for general uses. Type Ⅱ is based on a
をラインナップしております。 gold-plated SUMI-CARD for special design for high-speed signaling.
用 途 APPLICATION
・液晶 TV の LCD パネル駆動用信号伝送配線 ・LVDS wiring for LCD driving signal transmission.
・メモリーカードリーダ実装サブ基板との内部配線 ・USB wiring between main-board and memory reader device.
・HDMI ポート実装サブ基板との内部配線 ・HDMI wiring between main-board and HDMI port.
特 長 DESCRIPTION
・汎用:CUP と専用:ALZ の2種類のシールドテープをラインナップ ・Two kinds of shield tape are available. A commodity type is“CUP”.
・高周波特性は、シールドテープ種別と金めっき手法に依存 A purpose-built type is“ALZ”.
・Type Ⅰはニッケルめっき軟銅箔仕様で、Type Ⅱは軟銅箔導体仕様 ・The high frequency characteristic depends on shield tape and
・固定配線でのご使用を推奨 plating way of conductor.
・This product is classified roughly into two kinds by a kind of the
介在テープ
conductor type of core-FFC.
Interposition tape
・The conductor of core-FFC for“Type Ⅰ”is Nickel plated
絶縁体
Insulation annealed copper, for“Type Ⅱ”is annealed copper.
・This product is not suitable for sliding use.
シールドテープ 導体
Shield tape Conductor
構 造 CONSTRUCTION
・UL のカテゴリーは AWM ではなく、WIRING HARNESS とな ・This product is assembled with a FFC, interposition tape for
ります。(UL 認定番号 E66078) impedance adjustment, shield tape for electro shielding, and
・インピーダンス調整のために介在テープを使用しております。 electro-conductive tape for grounding electrode.
・シールド層を導体とは独立に GND と接続するための導電性テー ・The UL-category of this product is not AWM but WIRING
プ(錫めっき銅箔テープ,グランドバーに相当)を有します。 HARNESS. (UL approved No. E66078)
絶縁体 ポリエステル(接着層:難燃ポリエステル系接着剤)
INSULATION Polyester (Flame-retardant polyester adhesive)
補強テープ ポリエステル
SUPPORTING TAPE Polyester
UL 定格 80℃ /60V 105℃ /60V 105℃ /60V
UL-RATING STYLE No. AWM21147 AWM20706 AWM20861
ハロゲンフリー対応 ハロゲンフリー ハロゲンフリー 非ハロゲンフリー
HALOGEN FREE STATUS HF HF Non-HF
介在テープ ポリオレフィン樹脂
INTERPOSITION TAPE Polyolefin resin
ALZ
ALZ ALPET (斜線状エチレン酢酸ビニル系接着剤) CUP 銀蒸着 PET (導電性
シールドテープ ポリエステル系接着剤)
ALZ Aluminum-clad PET
SHIELD TAPE CUP Silver evaporated
(Zebra-coated ethylene-vinyl acetate adhesive)
PET (Electro-conductive
polyester adhesive)
導電性テープ 錫めっき銅箔テープ(シールド接地用電極)
ELECTRO-CONDUCTIVE TAPE Tinned copper tape ( for grounding electrode of shield tape )
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
Type Ⅱの構造 CONSTRUCTION LIST OF “TYPE Ⅱ”
項 目 構 成
ITEM DETAIL
軟銅箔 ,0.035 × 0.3mm(開口部のみにめっき),
導 体 下地ニッケルめっき厚:0.8um 以上、金めっき厚:0.08um 以上
CONDUCTOR Annealed copper, 0.035 × 0.3mm
Nickel plating thickness:Min.0.8 um, Au plating thickness:Min.0.08um, only exposed area
絶縁体 ポリエステル(接着層:難燃ポリオレフィン系接着剤)
INSULATION Polyester (Flame-retardant polyolefin adhesive)
補強テープ ポリエステル
SUPPORTING TAPE Polyester
UL 定格 80℃ /60V
UL-RATING STYLE No. AWM5442
ハロゲンフリー対応 非ハロゲンフリー
HALOGEN FREE STATUS Non-HF
介在テープ ポリオレフィン樹脂
INTERPOSITION TAPE Polyolefin resin
シールドテープ ALPET(斜線状エチレン酢酸ビニル系接着剤)
SHIELD TAPE ALZ Aluminum-clad PET (Zebra-coated ethylene-vinyl acetate adhesive)
導電性テープ 錫めっき銅箔テープ(シールド接地用電極)
ELECTRO-CONDUCTIVE TAPE Tinned copper tape ( for grounding electrode of shield tape )
形 状 SHAPE
L 代表寸法
I DIMENSION (EXAMPLE)
項 目
WT
S1 S2
ITEM
TT
寸法
BD 名 称 記 号 DIMENSION UNIT. mm
H1 H2
DESCRIPTION SYMBOL
3
端子間ピッチ
P 0.5 ± 0.03
TERMINAL PITCH
P
端末厚
W
TT
TERMINAL THICKNESS
コネクタ推奨寸法
ストリップ長
4 C D E 4 S1, S2 Connector maker
STRIP LENGTH
recommendation dimension
補強テープ長
H1, H2
SUPPORTING TAPE LENGTH
絶縁長
I 50 ≦ I < 800
INSULATION LENGTH
4 3 3 ケーブル全長
2 4 L I+S+S
CABLE LENGTH
ケーブル厚
WT (0.74)
CABLE THICKNESS
1 2 1 1
C 矢視図 D 矢視図 E 矢視図 ・AD タイプも製作可能です。 ・AD type is available.
Cross-section ・プラグタイプも対応可能です。 ・Plug terminal type is available.
㈰スミカード ® SUMI-CARD™
㈪介在テープ INTERPOSITION TAPE
㈫シールドテープ SHIELD TAPE
㈬導電性テープ ELECTRO-CONDUCTIVE TAPE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
性 能(例) PROPERTIES(EXAMPLES)
項 目
TYPE Ⅰ CUP TYPE Ⅰ ALZ TYPE Ⅱ ALZ
ITEM
インピーダンス(差動モード )
92 Ω typ. 90 ± 10 Ω 90 Ω typ. 90 ± 10 Ω 96 Ω typ. 100 ± 10 Ω
DIFFERENTIAL MODE IMPEDANCE
信号伝送品質
△ ○ ◎
SIGNAL INTEGRITY
耐屈曲性能
△ × ×
FLEX TESTING DURABILITY
品名呼称 NOMENCLATURE
SML2SC − n × I − × − P0.5
− − − N(35)
−K − − − −Z100 UL
製品区分略号
Symbol name
芯数
Number of conductors
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
高温高湿対応スミカード 高温高湿対応スミカード
SUMI-CARD for high temparature, high humidity
用 途 APPLICATION
・車載機器用途を中心に、高耐熱・高耐湿、且つ長期信頼性をもつ製品が ・In the major market of automotive electronics, it's strongly required
要求されます。このご要求に対応するために新規に独自開発した絶縁 the high reliability products like high heat resistance and high
フィルムを使用し、優れた耐環境性能をもつフラットケーブルです humidity resistance. SUMI-CARD for high temperature, high
humidity is now under developing to achieve higher performance with
the combination of our own high performance insulation material.
特 長 DESCRIPTION
・高耐熱・高耐湿性能を非照射にて実現 ・High performance with heat resistance and humidity resistance
(85℃、85%× 1,000 時間保証) without irradiation. (e.g.85℃ ,85%X1000Hr)
・従来より厳しい耐環境性能を要求される室外設置の車載機器 ・Will be applied for out-room automotive electoronics unit and
にも対応可能(ミリ波レーダー等) household electronic appliances which requires the high
Temp.resistance.
・イラックススミカードの代替品としても適用可能
・Replacement of the “IRRAX SUMI-CARD” is possible.
・金めっき対応可能
・Enable to Au-plating type and Tin plating type.
構 造 CONSTRUCTION
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 錫めっきタイプ
PRODUCT TYPE Tin Plated Copper type
標準 錫めっき軟銅箔(めっき厚 1 μ m 以上)
導 体 STANDARD Tinned copper (Thickness of tin plating:Min.1 μ m)
CONDUCTOR SNT2 錫めっき軟銅箔(めっき厚 0.4+0.2/-0.1 μ m( 純錫厚 0.1 ± 0.1 μ m))
ウィスカ対策品 ANTI-WHISKER Tinned copper (Thickness of tin plating:0.4+0.2/-0.1 μ m, pure tin plating:0.1 ± 0.1 μ m)
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 架橋ポリオレフィン
INSULATION ADHESIVE LAYER Cross-Linked Polyolefin
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 AUP タイプ
PRODUCT TYPE AUP type
材 質 軟銅箔
MATERIAL Annealed copper
めっき(全体) ニッケルめっき
PLATING(whole) Nickel Plating
AUP AUPT
厚み
導 体 THICKNESS 0.3 μ m 以上
CONDUCTOR Min. 0.3 μ m
めっき(端末部) 金めっき
PLATING(Terminal) Au Plating
AUP AUPT
厚み
THICKNESS 0.05 μ m 以上 0.15 μ m 以上
Min. 0.05 μ m Min. 0.15 μ m
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 難燃ポリオレフィン
INSULATION ADHESIVE LAYER Flame retardant polyolefin
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
性 能(例) PROPERTIES (EXAMPLES)
製品区分略号 構 成
SYMBOL NAME DETAIL
UL スタイル No.
5465 5462
UL STYLE No.
サイズ
NOMINAL DIMENSION 0.035 × 0.3 mm 0.05 × 0.7 mm
導体
CONDUCTOR ピッチ
0.5 mm 1.0 mm
PITCH
難燃性 VW‐1 合格
FLAME TEST VW‐1 PASS
導体抵抗 2,200 Ω /km 以下 600 Ω /km 以下
CONDUCTOR RESISTANCE Max. 2,200 Ω /km Max. 600 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω -m
耐電圧(隣接導体間)
AC500V-1 分絶縁破壊無し
DIELECTRIC STRENGTH AC500V-1min No Dielectric Breakdown
(Between Adjacent Conductors)
絶縁抵抗 1000M Ω -m 以上
Insulation Resistance Min. 1,000 M Ω -m
耐熱性 (110℃× 1000Hr)
HEAT RESISTANCE(110℃× 1000Hr) 耐電圧(隣接導体間) AC500V-1 分絶縁破壊無し
DIELECTRIC STRENGTH (Between Conductors)
AC500V-1min No Dielectric Breakdown
絶縁抵抗 1000M Ω -m 以上
Insulation Resistance Min. 1,000 M Ω -m
耐湿性 (85℃ 85%RH × 1000Hr)
HIGH HUMIDITY RESISTANCE 耐電圧(隣接導体間) AC500V-1 分絶縁破壊無し
(85℃ 85%RH × 1000Hr) DIELECTRIC STRENGTH (Between Conductors)
AC500V-1min No Dielectric Breakdown
絶縁抵抗 1000M Ω -m 以上
Insulation Resistance Min. 1,000 M Ω -m
耐寒性 (-40℃× 1000Hr)
COLD RESISTANCE 耐電圧(隣接導体間) AC500V-1 分絶縁破壊無し
(-40℃× 1000Hr) DIELECTRIC STRENGTH (Between Conductors)
AC500V-1min No Dielectric Breakdown
絶縁抵抗 1000M Ω -m 以上
Insulation Resistance Min. 1,000 M Ω -m
ヒートショック
HEAT SHOCK 耐電圧(隣接導体間) AC500V-1 分絶縁破壊無し
(110℃× 0.5Hr ⇔ -40℃× 0.5Hr)× 1000Cycles DIELECTRIC STRENGTH (Between Conductors)
AC500V-1min No Dielectric Breakdown
摩耗強度
φ 0.5mm, 600g, 60 回 / 分 10,000 回以上
ABRASION TEST Min. 10,000 cycles
φ 0.5mm, 600g, 60cycles/min
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL スタイルと適用品種 UL STYLE No. AND PRODUCTS
導体厚 導体間ピッチ
CABLE Pitch(mm)
製品区分略号 製品構造 CONDUCTOR
UL スタイル№ UL 定格 THICKNESS
SYMBOL PRODUCT THICKNESS
UL STYLE No. UL Rating (T)
NAME TYPE (B)
(mm) 1.25 '1.0 0.5
(mm)
0.035 0.18 ○ ○ ×
5462 105℃ 300V
錫めっきタイプ 0.05 0.20 ○ ○ ×
Tin Plated Type 0.035 0.18 × × ○
5465 105℃ 90V 0.05 0.20 × × ○
0.035 0.18 ○ ○ ×
SNT2 タイプ 5462 105℃ 300V 0.05 0.20 △ △ ×
SML2CD ANTI WHISKER
0.035 0.18 × × ○
Type 5465 105℃ 90V
0.05 0.20 × × △
0.035 0.18 × × ×
5462 105℃ 300V 0.05 0.20 × × ×
AUP タイプ
AUP Type 0.035 0.18 × × ○
5465 105℃ 90V 0.05 0.20 × × ×
公称寸法 NOMINAL DIMENSION
錫めっき、SNT 2タイプ (TIN PLATED, SNT2 TYPE) 単位 Unit : mm
項 目 寸 法
ITEM DEMENSION
導体間ピッチ
1.25 1.0 0.5
PITCH (P)
導体幅
0.80 0.70 0.60 0.30
CONDUCTOR WIDTH (A)
マージン幅
0.85 0.65 0.70 0.35
MARGIN WIDTH (M)
トータルピッチ n= 導体数
TOTAL PITCH (TP) P × (n + 1)
n=number of condoctors
仕上幅 n= 導体数
CABLE WIDTH (W) P × (n + 1)
n=number of condoctors
絶縁長
P × (n + 1)
INSULATION LENGTH (I)
全 長 20 以上任意 (P1.25,P1.0 の AD タイプは 30 以上 )
CABLE LENGTH (L) Min. 20(P1.25,P1.0 AD type:Min30)
端末厚
TERMINAL THICKNESS (TT) 0.30
剥離長
4,5,6,
STRIP LENGTH (S)
補強テープ長
SUPPORTING TAPE LENGTH (H) 6,8,10,15,20
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
AUP タイプ (AUP TYPE) 単位 Unit : mm
項 目 仕 様
ITEM DEMENSION
導体間ピッチ
0.5 1.0
PITCH (P)
導体幅
0.30 0.70
CONDUCTOR WIDTH (A)
マージン幅
0.35 0.65
MARGIN WIDTH (M)
トータルピッチ n= 導体数
TOTAL PITCH (TP) P × (n + 1)
n=number of condoctors
仕上幅 n= 導体数
CABLE WIDTH (W) P × (n + 1)
n=number of condoctors
絶縁長 20 以上任意 30 以上任意
INSULATION LENGTH (I) Min. 20 Min. 30
全 長 650mm 以下 /650mm 超は要相談
CABLE LENGTH (L) MAX. 650mm/Negotirble over 650mm
端末厚
TERMINAL THICKNESS (TT) 0.30 ± 0.05
剥離長
STRIP LENGTH (S) 4,5,6,
補強テープ長
SUPPORTING TAPE LENGTH (H) 6,8,10
品名呼称 NOMENCLATURE
SML2CD − n × I − × − P −S − − UL
製品区分略号
Symbol name
芯数 導体間ピッチ めっきタイプ
Number of conductors Pitch Plating type
絶縁長 ストリップ長
Insulation length Strip length
加工形態
Processing form ULスタイルNo.
※2 特殊記号 UL Style No.
Special processing form
補強テープ長
Supporting tape length
※1 青色のときBL Blule ; BL
BDタイプ ADタイプ
加工タイプ PROCESSING
BD type FORM AD type
ES
片端補強テープ、
両端末同じ方向に補強テープ 両端末逆方向に補強テープ (
Supporting tapes at both ends Supporting tapes at both ends
are on the same side are on the opposite side
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
高定格ハロゲンフリースミカード 高定格ハロゲンフリースミカード
High rating halogen-free Sumi-Card
用 途 APPLICATION
・液晶テレビの LED バックライト用途を中心として高定格電圧対応可能 ・The High Rating HF(halogen-free) product is demanded particularly
な製品が強く求められております。 for LCD TV – LED Back light unit. To meet this demand, We have
また、同時に環境対応品(ハロゲンフリー)も求められております。こ released the High Rating HF Sumi-Card which is used new
れらご要求に対応するため、新規に独自開発した絶縁フィルムを使用 developed our original insulation film.
した高定格ハロゲンフリーフラットケーブルです。
特 長 DESCRIPTION
・独自の非照射新規絶縁フィルム(ハロゲンフリー系接着剤) ・New Sumitomo original insulation material
・高電圧定格実現 (Non-irradiate and halogen-free)
・金めっき対応可能 ・High Rating(P1.0:105℃ ,300V、P0.5:105℃ ,150V)
・Available for Au-plating
構造 CONSTRUCTION
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 錫めっきタイプ
PRODUCT TYPE Tin Plated Copper type
標準 錫めっき軟銅箔(めっき厚 1 μ m 以上)
導 体 STANDARD Tinned copper (Thickness of tin plating:Min.1 μ m)
CONDUCTOR SNT2 錫めっき軟銅箔(めっき厚 0.4+0.2/-0.1 μ m( 純錫厚 0.1 ± 0.1 μ m))
ウィスカ対策品 ANTI-WHISKER Tinned copper (Thickness of tin plating:0.4+0.2/-0.1 μ m, pure tin plating:0.1 ± 0.1 μ m)
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 ハロゲンフリー難燃ポリエステル系接着剤
INSULATION ADHESIVE LAYER halogen-free flame retardant polyester
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
項 目 構 成
ITEM DETAIL
製品区分略号
SML2CD
SYMBOL NAME
製品構造 AUP タイプ
PRODUCT TYPE AUP type
標準 軟銅箔
STANDARD Annealed copper
めっき(全体) ニッケルめっき
PLATING(whole) Nickel Plating
AUP AUPT
厚み
導 体 THICKNESS 0.3 μ m 以上
CONDUCTOR Min. 0.3 μ m
めっき(端末部) 金めっき
PLATING(Terminal) Au Plating
AUP AUPT
厚み
THICKNESS 0.05 μ m 以上 0.05 μ m 以上
Min. 0.05 μ m Min. 0.15 μ m
絶縁層 ポリエステル
INSULATION LAYER Polyester
絶縁体 接着層 ハロゲンフリー難燃ポリエステル系接着剤
INSULATION ADHESIVE LAYER halogen-free flame retardant polyester
色 白
COLOR White
材 質 ポリエステル
補強テープ MATERIAL Polyester
SUPPORTING TAPE 色 青
COLOR Blue
性 能(例) PROPERTIES (EXAMPLES)
製品区分略号 構 成
SYMBOL NAME DETAIL
UL スタイル No.
5463 5460,5461
UL STYLE No.
サイズ
NOMINAL DIMENSION 0.035 × 0.3 mm 0.05 × 0.7 mm
導体
CONDUCTOR ピッチ
PITCH 0.5 mm 1.0 mm
難燃性 VW‐1 合格
FLAME TEST VW‐1 PASS
導体抵抗 2,200 Ω /km 以下 600 Ω /km 以下
CONDUCTOR RESISTANCE Max. 2,200 Ω /km Max. 600 Ω /km
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000 M Ω -m
耐電圧(隣接導体間)
AC2,000V-1 分 絶縁破壊無し
DIELECTRIC STRENGTH AC2,000V-1min No Dielectric Breakdown
(Between Adjacent Conductors)
摩耗強度
φ 0.5mm, 600g, 60 回 / 分 10,000 回以上
ABRASION TEST Min. 10,000 cycles
φ 0.5mm, 600g, 60cycles/min
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL スタイルと適用品種 UL STYLE No. AND PRODUCTS
導体厚 導体間ピッチ
CABLE Pitch(mm)
製品区分略号 製品構造 CONDUCTOR
UL スタイル№ UL 定格 THICKNESS
SYMBOL PRODUCT THICKNESS
UL STYLE No. UL Rating (T)
NAME TYPE (B)
(mm) 1.25 '1.0 0.5
(mm)
0.035 0.16 ○ ○ ×
錫めっきタイプ 5460 105℃ 150V
0.05 0.18 ○ ○ ×
( ウィスカ対策含む ) 0.035 0.16 ○ ○ ×
Tin Plated Type 5461 105℃ 300V 0.05
(Including SNT2) 0.18 ○ ○ ×
0.035 0.16 × × ○
5463 105℃ 150V
0.05 0.18 × × ○
SML2CD
0.035 0.16 × △ ×
5460 105℃ 150V
0.05 0.18 × ○ ×
AUP タイプ 0.035 0.16 × △ ×
5461 105℃ 300V 0.05
AUP Type 0.18 × ○ ×
0.035 0.16 × × ○
5463 105℃ 150V 0.05 0.18 × × ×
公称寸法 NOMINAL DIMENSION
錫めっき、SNT2 タイプ(TIN PRATED, SNT2 TYPE) 単位 Unit : mm
項 目 寸 法
ITEM DEMENSION
導体間ピッチ
1.25 1.0 0.5
PITCH (P)
導体幅
0.80 0.70 0.60 0.30
CONDUCTOR WIDTH (A)
マージン幅
0.85 0.65 0.70 0.35
MARGIN WIDTH (M)
トータルピッチ n= 導体数
TOTAL PITCH (TP) P × (n + 1)
n=number of condoctors
仕上幅 n= 導体数
CABLE WIDTH (W) P × (n + 1)
n=number of condoctors
絶縁長
P × (n + 1)
INSULATION LENGTH (I)
全 長 20 以上任意 (P1.25,P1.0 の AD タイプは 30 以上 )
CABLE LENGTH (L) Min. 20(P1.25,P1.0 AD type:Min30)
端末厚
TERMINAL THICKNESS (TT) 0.30
剥離長
STRIP LENGTH (S) 4,5,6,
補強テープ長
6,8,10,15,20
SUPPORTING TAPE LENGTH (H)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
AUP タイプ (AUP TYPE) 単位 Unit : mm
項 目 仕 様
ITEM DEMENSION
導体間ピッチ
0.5 1.0
PITCH (P)
導体幅
0.30 0.70
CONDUCTOR WIDTH (A)
マージン幅
0.35 0.65
MARGIN WIDTH (M)
トータルピッチ n= 導体数
TOTAL PITCH (TP) P × (n + 1)
n=number of condoctors
仕上幅 n= 導体数
CABLE WIDTH (W) P × (n + 1)
n=number of condoctors
絶縁長 20 以上任意 30 以上任意
INSULATION LENGTH (I) Min. 20 Min. 30
全 長 650mm 以下 /650mm 超は要相談
CABLE LENGTH (L) MAX. 650mm/Negotirble over 650mm
端末厚
TERMINAL THICKNESS (TT) 0.30 ± 0.05
剥離長
STRIP LENGTH (S) 4,5,6,
補強テープ長
SUPPORTING TAPE LENGTH (H) 6,8,10
品名呼称 NOMENCLATURE
SML2CD − n × I − × − P −S − − UL
製品区分略号
Symbol name
芯数 導体間ピッチ めっきタイプ
Number of conductors Pitch Plating type
絶縁長 ストリップ長
Insulation length Strip length
加工形態
Processing form ULスタイルNo.
※2 特殊記号 UL Style No.
Special processing form
補強テープ長
Supporting tape length
※1 青色のときBL Blule ; BL
BDタイプ ADタイプ
加工タイプ PROCESSING
BD type FORM AD type
ES
片端補強テープ、
両端末同じ方向に補強テープ 両端末逆方向に補強テープ (
Supporting tapes at both ends Supporting tapes at both ends
are on the same side are on the opposite side
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL 規格フラットケーブル UL STANDARD FLAT CABLE
ジャンパーリード ジャンパーリード
JUMPER LEAD
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE
Free Free Free Free Free Free
用 途 APPLICATION
・オーディオ、DVD、電話機、OA 機器その他電子器内部配線。 JUMPER LEAD is used for internal wiring of electronic
equipment such as audio, DVD, phone, OA equipment and so on.
特 長 DESCRIPTION
・定格 300V・105℃の UL 規格および CSA 規格も取得。 ・Certification : UL standard certifies UL2651 and UL4478 as
・基板への半田付実装や挿抜型コネクタへの嵌合可能。 105℃ , 300V rating. UL2651 and 4478 are certifid for CSA
standard,too.
・Application : Soldering to PCB or fitting with connector.
構造 CONSTRUCTION
UL スタイル No. 4478
2651 ハロゲンフリー
UL STYLE No. HALOGEN FREE
UL 定格
105℃ , 300 V
UL RATING
製品区分略号
SMV2J SMV2RJ SMV2RJ-HF
SYMBOL NAME
導体 7/0.16(OM-1S)
CONDUCTOR 7/0.16(OM-CP)
性 能 PROPERTIES
UL スタイル No. 4478
2651 ハロゲンフリー
UL STYLE No. HALOGEN FREE
難燃性 VW-1 合格
FLAME TEST VW-1Pass
絶縁抵抗 1,000M Ω -m 以上
INSULATION RESISTANCE Min. 1,000M Ω -m
耐電圧 (導体
/ 水中間) AC2,000V-1 分
絶縁破壊無し
DIELECTRIC STRENGTH
AC2,000V-1min
(Conductors / Water) No Dielectric Breakdown
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
公称寸法 NOMINAL DIMENSION 単位 Unit:mm
トータルピッチ
P ×(n-1)
TOTAL PITCH (TP)
仕上巾
P×n
CABLE WIDTH (W)
仕上厚
0.95
CABLE THICKNESS (T)
絶縁長 20 以上
INSULATION LENGTH (I ) Min. 20
標 準 サヤ残し
3,3.5,4,4.5,5 Semi-strip (4.5)
Standard
ストリップ長
STRIP LENGTH (S) フォーミング
Forming 3.5F 〜 5F
形 状 SHAPE
UL スタイル No. 4478
2651 ハロゲンフリー
UL STYLE No. HALOGEN FREE
導体 絶縁体
S I S Conductors Insulation 導体 絶縁体
Conductors Insulation
T
T
P
P
TP TP
W
W
品名呼称 NOMENCLATURE
− − × n × I − P − S + − UL
未使用→
TP
製品区分略号
W
導体 絶縁体
P
Symbol name
加工形態 ストリップ長
Processing form Strip length
導体 ストリップ長 ULスタイルNo.
Conductor Strip length UL Style No.
芯数
Number of conductors
絶縁長 特殊記号
Insulation length Special processing form
絶縁体関係 M :ULマーキングあり UL marking
導体間ピッチ Insulation HF :ハロゲンフリー Halogen Free
Pitch LF :鉛フリー Lead Free
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
加工タイプ PROCESSING FORM
B C D
S1 S2 S1 S2 片端および両端フォーミング
両端導体露出 S1=S2 両端導体露出 S1≠S2 One or both ends conductor are formed.
Both ends are stripped. Both ends are stripped.
片端および両端鞘残し
One or both ends are semi-stripped.
片端および両端特殊鞘残し
One or both ends are
semi-stripped.specially
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
Li イオン電池用リード線 TAB LEAD FOR THE LI-ION(POLYMER) BATTERY
タブリード タブリード
TAB-LEAD
RoHS Directive
Lead Hg Cd Cr6+ PBB PBDE PVC Halogen
Free Free Free Free Free Free Free Free
用 途 APPLICATION
フィルム型 Li イオン電池(ポリマー電池)用タブリード TAB LEAD specially designed for the Li-ion(polymer) battery.
特 長 DESCRIPTION
・接着層と耐熱層の 2 層構造によって、加熱変形を抑制し、導体 ・High heat resistance(non-deformation)
との接着力と、フィルムとのショート防止を両立 ・Excellent sealing ability
・導体に表面処理することで、優れた耐電解液性を保持 ・Conductor surface treatment technology
構 造 CONSTRUCTION
項 目 プラスリード マイナスリード
ITEM PLUS LEAD MINUS LEAD
ニッケル Nickel
アルミ(ノンクロム系表面処理等)
導 体 ニッケル(ノンクロム系表面処理等)
Aluminum
CONDUCTOR Nickel (Surface treatment non-Cr)
(Surface treatment non-Cr)
ニッケルめっき銅
Nickel plated copper
耐熱層 耐熱ポリプロピレン
HEAT RESISTANCE LAYER Heat resistant PP
絶縁体
INSULATION
接着層 特殊ポリプロピレン
ADHESIVE LAYER Modified PP
製品 プラスリード 納入形態
マイナスリード
Product MINUS LEAD PLUS LEAD Delivery style
セパレーター
Separator
正極
負極 Cathode
Anode
アルミラミネートフィルム
Aluminum laminated film
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
公称寸法 NOMINAL DIMENSION 単位 Unit:mm
項 目 仕 様
ITEM SPECIFICATION
導体巾(d) 2.0 3.0 4.0 5.0 6.0 7.0 10.0
CONDUCTOR WIDTH (d)
導体厚(t)
CONDUCTOR THICKNESS (t) 0.1 0.08, 0.1
マージン巾(M)
MARGIN WIDTH (M) 1.0, 1.5, 2.0 2.0
標 準
STANDARD t + 0.2
F タイプ
総厚(T) F TYPE t + 0.14
TOTAL
THICKNESS (T) SF タイプ
t + 0.12
SFTYPE
貼り付けピッチ(P)
INSULATION PITCH ON THE CONDUCTOR 20.0 以上任意 Min. 20.0
絶縁長(I) 標 準 5.0 最 低 3.0
INSULATION LENGTH (I) Standard Min
絶縁巾(W) d +(M × 2)
INSULATION WIDTH (W)
I P
M
d
T t
接着層 W
品名呼称 NOMENCLATURE
例)
PLUS LEAD-0.08×4.0(ALF-O)×1×50.0-P8.0-PP(5.0)-COIL
MINUS LEAD-0.08×4.0(N I - O)×1×50.0-P8.0-PP(5.0)-COIL
− × ( )× 1 × − P − − COIL
製品区分略号 導体巾 芯数
PLUS LEAD Conductor Number of 絶縁巾
MINUS LEAD width conductors Insulation width
導体厚 絶縁体・絶縁長
Conductor
thickness Insulation(Insulation length)
絶縁体
(カッコ内は)
PP( ) :標準
貼り付けピッチ 絶縁長 :Standard
Insulation pitch Insulation
on the conductor
( )
PP( )F:Fタイプ
導体種類 ( ) means
insulation :F type
Kind of conductor length
PP( )SF :SFタイプ
導体種類 ALF-O :表面処理アルミ Aluminum (Surface treatment non-Cr) :SF type
Kind of NI-O :ニッケル Nickel
conductor NIF-O :表面処理ニッケル Nickel (Surface treatment non-Cr)
NICU-O :ニッケルめっき銅 Nickel plated copper
※本製品は車載用途に適さない場合がございますので、御使用前に弊社営業にご相談下さい。
※ This product is not suitable for automobile application in some cases. Please contact our sales office before you use this product.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
INDEX
第 8 章 参考資料
Section 8 Reference
ページ
Page
イラックス ® の特性
8-1
CHARACTERISTICS OF IRRAX™
スミフロン ® の特性
8-8
CHARACTERISTICS OF SUMIFLON™
UL 規格各種シールド線の特性
8-9
CHARACTERISTICS OF VARIOUS KINDS OF SHIELDED WIRES IN THE UL STANDARD
直流導体抵抗計算式
8-10
DIRECT CURRENT CONDUCTOR RESISTANCE CALCULATION FORMULA
許容電流計算式
8-11
PERMISSIBLE CURRENT CALCULATION FORMULA
環境負荷物質対応について
8-15
CONTROLS ON SUBSTANCE OF CONCERN
A.W.G‐mm 換算表
8-18
A.W.G‐mm CONVERSION TABLE
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
SUPPLEMENTARY DATA
®
イラックス とは何か What is IRRAX™ ?
イラックス とは住友電工が製造する電子線架橋耐熱プラスチックの
®
IRRAX™ is the trade name of electron beam cross-linked heat
総称である。 resistant plastics manufactured by Sumitomo Electric Industries, Ltd.
塩化ビニルやポリエチレンは電気的な破壊が生じにくく、酸やアルカ PVC and polyethylene are difficult to occur the electrical breakdown
and to be affected by chemicals such as acid, alkali, etc., excellent in
リなどの化学薬品に侵され難く、機械的性質も優秀であり、低温でも
the mechanical property, not broken easily even at low temperature and
容易に破壊せず押出や成型加工も非常にやり易い。 very easy to conduct the extrusion and molding workings.
しかしながら、塩化ビニルやポリエチレン製品の唯一の欠点とも言え However, only one defect of PVC and polyethylene products is that
るのは高温になると溶けて流動を起こす点である。 they melt and flow at high temperature.
これは、塩化ビニルやポリエチレンが加工し易いと言う長所が逆に欠 This is that the merit of the PVC and polyethylene to be easy to work
点ともなっている訳である。 becomes conversely the defect.
On the other hand, since rubber is used after being added the
これに対してゴムはかならず硫黄等の触媒を加えて、架橋して使われ
vulcanizer of sulfur, etc., and being cross-linked at any case the worked
るので、もはや加工して製品になったものは溶けることはないのである。 product does not melt any more.
塩化ビニルやポリエチレンをその秀れた電気性能、化学的性能を生 In case PVC and polyethylene are used as electrical insulation material
かして電線その他の電気絶縁材料、防食材料として用いた場合、実 and anticorrosion material making good use of their excellent electrical
際に使用されるに当り例えば電線の端末処理の時の半田の熱、部品 performance and chemical performance, when using them practically
のリードに用いた時の部品のワニス処理時の熱、何かの事故で一時 there may be many unexpected opportunities to receive the heat
的に 200℃位に温度上昇を生じるなど熱履歴を受ける機会は意外に histories such as, heat of the solder at electronic wire terminal
treatment, heat at varnish treatment of parts in being used to the lead
多いものである。 of parts and the temporary temperature rise to approximately 200℃ by
こんな時に絶縁体の塩化ビニルやポリエチレンが溶けて流れたりせ any accident.
ず、ゴムの様な性質を持っていれば便利なことは明らかであろう。 It is clear that it is convenient for PVC and polyethylene as insulation
ポリエチレンが放射線で架橋する機構はおよそ次の様なものと考えら to have the same property as rubber without being, melted and flown.
れている。 The mechanism that polyethylene bridges with radiant ray is considered
ポリエチレンの直鎖状の高分子に放射線が照射されると次の様なラ roughly as follows.
When being irradiated with the radiant ray the straight chain of high
ジカルが発生する。
molecular polyethylene,the following radicals are produced.
H H H H H H H
C C C C ........ ∼ C C C C ........ +H
H H H H H H H H
この様にして発生したラジカルを有する直鎖高分子が反応し網目 The straight chain of high molecular polyethylene having radicals
状の三次元構造を形成する。 produced in such a way is reacted, and the three dimensional
mesh-shaped structure is formed.
(2014.02)
架橋塩化ビニルやポリエチレンの大きな特長として架橋反応を生ず Another merit of cross-linked PVC and polyethylene is to maintain
る前に有した電気的機械的性質を殆んど失うことなく維持している the electrical and mechanical properties which they have before
ことがあげられる。 producing cross-linkage.
即ちイラックス ® は大ざっぱにいって〔塩化ビニルやポリエチレンに Generally speaking, IRRAX™ can be expressed as [that added heat
resistance to PVC and polyethylene , excellent PVC and
耐熱性を附与したもの〕と表現することもできよう。
Polyethylene having higher heat resistance].
用 途
イラックス ® USE
材料の種類
特 長
KIND OF
電 線 テープフィルム CHARACTERISTICS
IRRAX™
MATERIAL ELECTRONIC WIRE TAPE FILM
イラックス ®A ポリエチレンと同じ電気的性質
◯ ◯
IRRAX™ A Same electrical properties as polyethylene
難燃性
B ◯ ◯
Flame retardant polyethylene
半硬質、難撚、
(UL 品も有り)
V1 ◯ ー Semi-rigid and flame retardant PVC
(There may be also the UL product.)
軟質、難撚、 (UL 品も有り)
V2 ◯ ◯ Soft and flame retardant PVC
(There may be also the UL product.)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
イラックス の性能 PERFORMANCE OF IRRAX™
®
◯ ◯ ◯ ◯ ◯
GASOLINE (70℃ ) (Hardening) (Swelling) (Swelling) (Swelling) (Swelling)
潤 滑 油 △(硬化) △(膨潤)△(膨潤)△(膨潤) △(膨潤)
◯ ◯ ◯ ◯ ◯
LUBRICANT OIL (70℃ ) (Hardening) (Swelling) (Swelling) (Swelling) (Swelling)
耐油耐薬品性
酸
○ ○ ○ ◎ ◯ ◯ ◯ ◯ ◯ ◯
ACID
アルカリ
○ ○ ○ ◎ ◯ ◯ ◯ ◯ ◯ ◯
ALKALI
△(膨潤)
THF (90℃ ) × △ ◯ ◯ ◯ ◯ ◯ ◯ ◯
(Swelling)
キシレン △(硬化) △(膨潤) △(膨潤) △(膨潤)△(膨潤)△(膨潤) △(膨潤)
◯ × ◯
XYLENE (120℃ ) (Hardening) (Swelling) (Swelling) (Swelling) (Swelling) (Swelling) (Swelling)
耐摩耗性
△ ◯ ◯ ◯ ◯ ◯ ◯ ◯ ◎ △
PHYSICAL PROPERTIES
ABRASION RESISTANCE
耐カットスルー
△ ◯ △ ◯ ◯ ◯ ◯ ◯ ◯ △
CUT THROUGH RESISTANCE
物理特性
加 工 性
○ ◯ ◎ ◎ ◯ ◯ ◯ ◯ △ ◯
WORKABILITY
耐放射線性
△ △ ◯ ◯ ◯ ◯ ◯ ◯ × ◯
RADIATION RAY RESISTANCE
発 煙 性
△ △ △ △ △ △ △ △ ◯ ◯
SMOKE GENERATION
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
イラックス の性能 PERFORMANCE OF IRRAX™
®
■耐熱性 �� 塩化ビニルやポリエチレンは温度上昇に伴いヤング ■ Heat resistance � PVC and polyethylene reduce the Young's
率が減少し、融点より高温で軟化流動する。ところが、 modulus accompanied with the temperature rise,
イラックス ® は前述のように直鎖状高分子間に架橋結 and they soften and flow at higher temperature
合を起こしているため、分子全体としては、流体では than the melting points.
On the other hand, on account of the fact that
なくゴム弾性体の性質を示す。従って電線の絶縁体
IRRAX™ have the three dimensional cross-
に用いた場合、半田接続作業時に 300℃附近の温度
linked structure as described above, it indicates
の半田や半田ごてが触れても単にゴム弾性を示すの the elastic property like rubber.
みで変形が残ることなく非常に有利である。又、塩化 Therefore, when using it as the insulation of
ビニルやポリエチレン電線の場合、曲げられた状態 electronic wire, it is very advantageous. Because
で配線されていて、一時的に例えば 200℃の温度に if a solder or soldering iron of approximately
露された場合導体が外部に露出する場合がある。こ 300℃ of temperature comes in contact during
れに反してイラックス ® の場合絶縁体が流れることは solder connecting work, it indicates the elastic
なく何の変化も生じない。この様な電線を配線素材 property as rubber without causing deformation.
Furthermore, in the case of PVC and polyethylene
として使えば信頼性の向上という大きな利点が得ら
insulated electronic wires which are done wiring in
れることを示すものである。
the bent condition, it occurs that the conductor is
■耐亀裂性 �� ポリエチレンには環境応力亀裂の問題がある。これは exposed to the outside when it is exposed to
材料の加工時の加工歪がそのまま内部に残存する場 temporarily, for example, at 200℃ of temperature.
合とか、材料の実用時に外部より力を加えることによ On the contrary, in the case of IRRAX™ the
り内部に応力を発生させた条件で使用する場合に特 insulation does not flow, and no change is occurs.
に問題になる。この特性の尺度として ASTDM D When using our IRRAX™ as insulating material, it
1693 − 60T による試験方法がある。これは界面活性 is indicated that a large merit such as reliability
剤の液に板状の材料を曲げた形で入れ湾曲面が何 improvement is obtained.
■ Stress crack In polyethylene there is a problem of
時間後に割れるかを求めるものである。一般的に言え
resistance…………… environmental stress crack. This is caused in
ば鎖状の高分子物質に比較し三次元網状構造を示
case the working strain at working remains
すものが優れている。ポリエチレンの場合も全く同様 inside as it is, or in case it is used in the condition
であり、電子線照射ポリエチレンすなわちイラックス that the stress is produced inside by applying
®
A は非常に優れた性質を示す。結果を第 2 表に示し the force from the outside at practical use.
た。 As criterion of this property there is the test
method in accordance with the ASTM D 1693-60T.
This is to observe how may hours later the
curvature surface is broken after entering a
plateshaped material in a bent way into the liquid
of the surface-active agent.
Generally speaking, materials having the three
dimensional mesh-shaped structure are excellent,
compared with those having no cross-linking.
The case of polyethylene is completely similar, and
electron beam irradiated polyethylene, namely,
IRRAX™ A indicates excellent stress crack
resistance.
The result is shown in Table 2.
■耐油・
塩化ビニルやポリエチレンは溶剤中に入れると溶解する。 ■ Oil Resistance and When entering PVC and polyethylene in the
……
耐溶剤性 これに対して、イラックス ® は溶剤を吸って膨潤するが Solvent Resistance…… organic solvent, they are dissolved.
不溶性のゲルを有し、 原形が崩れない。 On the other hand, IRRAX™ is swollen by
この様に有機溶剤に溶けにくいと言うイラックス ® の性質 absorbing the solvent, but it shows the insoluble
gel state and does not demolish the original
はワニス処理や溶剤で洗浄することのある電子機器の回
form.
路部品のリード用の絶縁体として使うのに有利である。
In such a way, the property of IRRAX™ that is
difficult to dissolve in the organic solvent is
advantageous in being used as insulation for
lead wire of circuit parts of electronic
equipment which are washed with solvent or
performed with varnish treatment.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
第3表 耐油・耐溶剤 Table 3 Oil Resistance and Solvent Resistance
試験溶剤 SOLVENT 膨 潤 ※ SWELLING ※ 備 考 REMARKS
25% 20℃ : Property unchanged within
25% 20℃:3 カ月以内品質不変 3 months
硫 酸 25% 60℃ : Property unchanged within
SULFURIC − 25% 60℃:1 カ月以内品質不変 1 months
ACID
無機酸 98% 20℃ : Property unchanged within
98% 20℃:3 カ月以内品質不変 3 months
INORGANIC
ACID 25% 60℃ : Property unchanged within
25% 60℃:1 カ月以内品質不変 1 month
硝 酸
NITRIC − 50% 20℃ : Property unchanged within
ACID 50% 20℃:1 カ月以内品質不変 1 month
50% 60℃:使用不可 50% 60℃ : Not used
アルカリ 強アルカリ、弱アルカリともにきわめて安 It is extremely stable both in strong
−
ALKALI 定である alkali and weak alkali.
軸方向伸び
キシレン
Elongation in the axial direction
自己径巻きにて亀裂なし No crack in the self-diameter winding.
105℃:1 分 (minute) 120%
炭化 XYLENE
10 分 (minutes) 135%
水素系
HYDRO- 重量変化
CARBON ガソリン Weight change
Take care of the swelling at higher than
25℃: 120% 50℃以上では膨潤に注意のこと
50℃ .
GASOLINE 50℃: 135%
70℃: 203%
流動パラ 軸方向伸び
No crack in the self diameter winding.
フィン Elongation in the axial direction 自己径巻きにて亀裂なし。半田付けした
The projection and tear of tube are pro-
FLUID 120℃:5 分 (minutes) 120% 固定端よりチューブの突質、破れが起こる
duced from the fixed end soldered.
パラフィン PARAFFIN 60 分 (minutes) 134%
The swelling is remarkable. The proje-
PARAFFIN 重量変化
膨潤がいちじるしい半田付けした固定端 ction and tear of tube are produced
ワックス Weight change
からチューブの突出、破れが生じる from the fixed end soldered.
WAX 130℃:30 分 (minutes)
破壊電圧はオリジナルより 30%低下 The rupture voltage lowers 30% than
300%
the original one.
軸方向伸び The self-diameter winding crack is pro-
Elongation in the axial direction 自己径巻き亀裂発生、導体両端半田付け duced, and the tear of insulation is
トリクロールエチレン
87℃:1 分 (minute) 140% では絶縁体の破れが生じる produced in the soldering of both ends
TRICHLOROETHYLENE
5 分 (minutes) 180% 蒸気中では 10 分以内 of conductor, and within 10 minutes in
15 分 (minutes) 190% the steam.
ワニス The self-diameter winding crack is pro-
VARNISH 重量変化 duced.
自己径巻き亀裂発生
(# 1270: Weight change If the 10 times and crack are not pro-
自己径 10 回、亀裂生せず
シンナー 130℃:30 分 (minutes) duced.
破壊電圧はオリジナルより 60%低下
THINNER 133% The rupture voltage lowers 60% than
ワニス 1:1 ) the original one.
VARNISH ワニスコン
パウンド 重量変化 The rupture voltage lowers 80% than the
VARNISH Weight change 破壊電圧はオリジナルより 80%低下 original one.
COMPOUND 260℃より徐冷:132% 絶縁抵抗はオリジナルの 10%に低下 The insulation resistance lowers to 10%
(JIS C2683 Annialing from 260℃ of the original one.
K.43D)
OF 重量変化 The self-diameter winding crack is pro-
ケーブル油 Weight change 自己径巻き亀裂発生 duced.
OF CABLE 130℃:30 分 (minutes) 電気的性質の劣化は起こらない The deterioration of electrical property
絶縁油 OIL 190% does not occur.
INSULATING
OIL The swelling is severe, and the use is
軸方向伸び
JIS 膨潤ひどく使用不可 impossible.
Elongation in the axial direction
C 2320 電気的性質の劣化は起こらない The deterioration of electrical property
110℃:1 分 (minute) 170%
does not occur.
Concerning freon Nos. 114, 112 and 111
メタン系 Nos.-114, -112, -111 のフレオンについて
the considerable mechanical change is
METHANE − は、いちじるしい機械的変化認められず
炭化水素の SERIES not observed. The Nos. 21 and 22 are
Nos.-21, -22 は使用可能
ハロゲン not used.
誘導体
HALOGEN エタン系
ETHANE − 安定で問題なし Stable and without problem.
SERIES
※オリジナルを 100%とした
The original should as 100%.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
イラックス の性能 PERFORMANCE OF IRRAX™
®
75
イラ
熱変形残率(%)
ック
ス ®V
2 ® IRRAX™A
IR A
イラッRクAス
X ™ V2
50
塩
化
ビ
ニ
ル
25
PV
C
リ
ポ
エチ レ
ン Polyethyl
ene
0
70 100 150 200
温度(℃)
Temperature
3000
A
™
AXR
IR
A
ス®
Tensile strenght
抗張力(psi)
2000 ne
ッ
yle
ラ
th
lye
イ
Po
レン
エチ
ポリ
1000
0
100 200 300 400 500 600 700
伸び(%)
Elongation
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
イラックス の性能 PERFORMANCE OF IRRAX™
®
100
Impulse rupture voltage
イラックス®A
インパルス破壊電圧
IRRAX™A
80
(kV/mm)
60
ポリエチレン
Polyethylene
40
20
0
20 40 60 80 100 120
温度(℃)
Temperature
応用 APPLICATION
第5表 Table 5
イラックス ® 材料の種類 代表的な電線種類 使用される理由
KIND OF IRRAX™ MATERIAL KIND OF ELECTRIC WIRE REASON TO BE USED
Hook up wire (For example, hair 耐熱性、耐半田付性
(1)Hook up wire
(例 Hair dryer )
dryer) Heat resistance and soldering resistance
自動車用電線 Electronic wire for automobile 過電流特性および耐熱性
イラックス ®A , B (2)
(JASO
〔自動車用〕規格) (JASO standard〔for automobile〕) Overcurrent characteristic and heat resistance
IRRAX™A , B
(3)同軸ケーブルおよび遮蔽付電線 Coaxial cable and shielded electronic wire 耐半田付性 Soldering resistance
高耐電圧性、耐熱性
(4)テレビ用高圧線 High voltage wire for television
High voltage resistance and heat resistance
発泡イラックス ®A ※ 1 同軸ケーブルおよび遮蔽付電 Coaxial cable and shielded electronic
FOAMED IRRAX™A ※ 1 (1)線(電子機器、コンピューター、 wire (Electronic equipment, compu- 耐半田付性 Soldering resistance
ELECTRONIC テレビ、ステレオ) ters, television sets and stereo sets)
耐熱性、耐半田付性
(1)Hook up wire
(UL 規格) Hook up wire (UL standard)
Heat resistance and soldering resistance
イラックス ® V
IRRAX™ V 自動車用電線 Electronic wire for automobile
(2) 耐熱性 Heat resistance
(JASO
〔自動車用〕規格) (JASO standard〔for automobile〕)
(3)小型モーター口出線 Small motor lead wire 耐熱性 Heat resistance
(2014.02)
SUPPLEMENTARY DATA
スミフロン ® 絶縁電線は合成樹脂〈フッ素樹脂〉を絶縁材料に取 SUMIFLON™ insulated electronic wire has the excellent heat
り入れた耐熱、耐薬品性にすぐれた電線で次の 3 種類があります。 resistance and chemical resistance, which adopts synthetic resin
as insulating material, and there are the following three kinds.
■スミフロン ® P ■ SUMIFLON™P
絶縁電線 �この電線は四フッ化エチレンと六フッ化プロピレ Insulated Electronic Wire This is insulated by FEP (Fluorinated-
ンを共重合させて製造時の加工性を良くしたフッ Ethylene-Propylene) which is made by
化エチレンプロピレン樹脂− FEP(Fluorinated copolymerizing Tetra-Fluoro-Ethylene and
Hexa-Fluoro-Propylene. The covering to
‐Ethylene‐Propylene)−を絶縁体に用いたフッ
the electronic wire is performed by the
素樹脂絶縁電線です。電線への被覆は押出法によ
extrusion process.
って行なわれます。 ■ SUMIFLON™E
■スミフロン ® E Insulated Electronic Wire This is insulated by Ethylene-Tetra-
絶縁電線 �この電線はエチレンと TEE を共重合させて、カ Fluoro-Ethylene copolymer (ETFE)
ットスルー抵抗および耐放射線性を良くしたエチ improving the cut through resistance and
レンテトラフロロエチレン樹脂− ETFE the radiant ray resistance. The covering to
(Ethylene‐Tetra‐Fluoro‐Ethylene)−を絶縁 the electronic wire is performed by the
体としたものです。電線への被覆は押出法によっ extrusion process.
■ SUMIFLON™A
て行なわれます。
Insulated Electronic Wire This is insulated by PFA
■スミフロン ® A (Tetrafluoroethylene-Per-Fluoro-
絶縁電線 �この電線は四フッ化エチレンとパーフロロアルキ Alkylvinylether copolymer). The covering
ルビニルエーテルを共重合させた四フッ化エチレ to the electronic wire is performed by the
ンパーフロロアルキルビニルエーテル樹脂− extrusion process.
PFA(Tetrafluoroethylene‐Per‐Fluoro‐
Alkylvinylether)−を絶縁体としたものです。電
線への被覆は押出法によって行なわれます。
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
SUPPLEMENTARY DATA
照射発泡ポリエチレン
絶縁材質 耐熱 PVC
— Irradiated foamed
INSULATION MATERIAL Heat resistant PVC
polyethylene
耐熱性 230℃ 1 分間
不 溶 溶ける
HEAT RESISTANCE, —
not melt melt
230℃ , for 1MINUTE
絶縁体抗張力※
約6 約 18
INSULATION TENSILE MPa
about 6 about 18
STRENGTH
絶縁体伸び※
約 200 約 200
INSULATION %
about 200 about 200
ELONGATION
静電容量の温度変化
変化なし 変化大
TEMPERATURE CHANGE —
Unchanged Changed largely
OF CAPACITANCE
熱変形性
— △ ○
HEAT DEFORMATION
柔軟性
— ◎ ○
FLEXIBILITY
細 さ
— ○ ○
THINNESS
難燃性 UL VW-1 に適合 UL VW-1 に適合
—
FLAME RETARDANT In accordance with UL VW-1 In accordance with UL VW-1
※:特性値は目安であり、保証値ではありません。
The value is for reference, but not be guaranteed.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
SUPPLEMENTARY DATA
(2014.02)
SUPPLEMENTARY DATA
公 式 FORMULA
絶縁電線の許容電流 I は次の式で計算します。 The permissible current l of insulated wire is
T1−T calculated by the following formula.
I=η0
rR
I=η0 T1−T
ここに I :許容電流(A) rR
r :電線のT1 ℃における導体実効抵抗(Ω/cm) Where, I :permissible current(A)
R :電線の全熱抵抗(℃cm/W) r :Conductor effective resistance at T1 ℃ of electronic wire(Ω/cm)
T1 :電線の最高許容温度(℃) R :Full heat resistance of electronic wire (℃ cm/W)
T :周囲温度(℃) T1:Maximum permissible temperature of electronic wire(℃)
η0 :多条布設の場合の許容電流低減率 T :Ambient temperature (℃)
η0:Permissible current reduction coefficient in the case of multi-wire installation
電線の導体抵抗 r は次により計算します。
The conductor resistance r of electronic wire is calculated by
r= r0{1+α
(T1−20)}
the following formula.
r0:電線の20℃における導体抵抗(規格値)(Ω/cm) r= r0{1+α(T1−20)}
α:導体温度抵抗係数(20℃のとき 銅 0.00393、アルミ 0.004) r0:Conductor resistance at 20℃ of electronic wire(standard value)
(Ω/cm)
α:Conductor resistance temperature coefficient
電線の全熱抵抗Rは次により計算します。 (at 20℃ copper 0.00393 and aluminum 0.004)
P1 d2 10P2
R=R1+R2 R1= loge (℃cm/W)R2= (℃cm/W) The full heat of electronic wire R is calculated
2π d1 πd2
ここに、R1:絶縁体および被覆の熱抵抗(℃cm/W) by the following formulas.
P1 d2 10P2
R2:電線表面の熱抵抗(℃cm/W) R=R1+R2 R1= loge (℃cm/W)R2= (℃cm/W)
2π d1 πd2
d1:導体外径(mm)
d2:電線外径(mm) Where, R1:Heat resistance of insulation and covering(℃cm/W)
R2:Heat resistance of electronic wire surface (℃cm/W)
P1:絶縁被覆の固有熱抵抗(℃cm/W) 表の値を用います。
d1:Outer diameter of conductor(mm)
P2:表面放散の固有熱抵抗(℃cm2/W)表の値を用います。 d2:Outer diameter of electronic wire(mm)
P1:Inherent heat resistance of insulation (℃cm/W)
The value in the table is used.
P2:Inherent heat resistance of surface diffusion(℃cm2/W)
The value in the table is used.
最高許容温度 多条布設の場合の許容電流低減率η 0
Maximum Permissible Temperature Permissible Current Reduction Coefficient η 0 of Multi-wire Installation
材料名 条 数 η0
T1(℃)
MATERIAL NUMBER OF WIRES 1 2 3 6 4 6 8 9 12
一般 PVC 配 列
60 S S S S S S S
GENERAL PVC ARRANGEM-
PE 75 中心間隔 ENT
S
イラックス ®A CENTRAL INTERVAL
90 S=d 1.00 0.85 0.80 0.70 0.70 0.60 ー ー ー
IRRAX™A
S=2d ー 0.95 0.95 0.90 0.90 0.90 0.85 0.80 0.80
イラックス B28、B32
®
125 S=3d ー 1.00 1.00 0.95 0.95 0.95 0.90 0.85 0.85
IRRAX™B28, B32
イラックス ®B30
150
IRRAX™B30
イラックス ®V2
105
IRRAX™V2
AEX-28 140
FEP 200
TFE 250
耐熱 PVC
80.105 ※弊社 Web サイトで許容電流値を算出できます。http://www.sei.co.jp/ewp/J/
HEAT RESISTANT PVC
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
各種電線の許容電流
Permissible Current of Various Kinds of Electronic Wires
イラックス®A電線(定格温度90℃) UL3443(定格温度105℃)
60
IRRAX™A electronic wire(Rating Temperature 90℃) 3.5sq UL3443(Rating Temperature 105℃)
50
40
2.0sq
30
20
1.25sq
許
許
20 15
0.75sq
容
AWG 20
容
0.5sq
電
AWG 22
電
10
流
流
10 0.3sq 8 AWG 24
(A) 9 7
8 (A) 6
7
→
0.2sq AWG 26
→
6 5
5 4 AWG 28
4
3 AWG 30
Permissible current(A)
Permissible current(A)
3
2
2
1
10 20 40 60 80 100 10 20 40 60 80 100
最高許容温度と周囲温度の差(℃) 最高許容温度と周囲温度の差(℃)
Difference Between the Maximum Permissible Difference Between the Maximum Permissible
Temperature and the Ambient Temperature(℃) Temperature and the Ambient Temperature(℃)
〈PS〉E
UL10368(定格温度105℃) UL3385(定格温度105℃)
UL10368(Rating Temperature 105℃) UL3385(Rating Temperature 105℃)
AWG18
10 20
9
許
8 AWG20
容
7
AWG24
6 AWG22
電
10
AWG26 9
5 8
流
AWG24
7
(A) 4 AWG28 (A)
6
AWG26
→
3 5
AWG30
4
AWG32
2
Permissible current(A)
Permissible current(A)
2
1 1
10 20 40 60 80 100 10 20 40 60 80 100
最高許容温度と周囲温度の差(℃) 最高許容温度と周囲温度の差(℃)
Difference Between the Maximum Permissible Difference Between the Maximum Permissible
Temperature and the Ambient Temperature(℃) Temperature and the Ambient Temperature(℃)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
UL1007(定格温度80℃) UL1015(定格温度105℃)
20 UL1007(Rating Temperature 80℃) UL1015(Rating Temperature 105℃)
30
AWG 18
許
許
AWG 18
容
容
20 20
電
電
10 20
9 22
流
流
8
22
7 24
(A) (A)
6 10 24
→
→
5 26 9
8
4 7
28
6
Permissible current(A)
Permissible current(A)
3 5
4
2
3
1
10 20 40 60 10 20 40 60 80 100
最高許容温度と周囲温度の差(℃) 最高許容温度と周囲温度の差(℃)
Difference Between the Maximum Permissible Difference Between the Maximum Permissible
Temperature and the Ambient Temperature(℃) Temperature and the Ambient Temperature(℃)
30 UL1430(定格温度105℃) 30 UL1672(定格温度105℃)
AWG
UL1430(Rating Temperature 105℃) UL1672(Rating Temperature 105℃) AWG
16
18
20 20
18
20
許
20
22
容
22 24
10
電
10
9 9
24
流
8 8
7 7
(A) 26 (A)
6 6
→
5 5
4 4
Permissible current(A)
Permissible current(A)
3 3
2 2
1 1
10 20 40 60 80 100 10 20 40 60 80 100
最高許容温度と周囲温度の差(℃) 最高許容温度と周囲温度の差(℃)
Difference Between the Maximum Permissible Difference Between the Maximum Permissible
Temperature and the Ambient Temperature(℃) Temperature and the Ambient Temperature(℃)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
各種電線の許容電流(0.5mm2)
Permissible Current of Various Kinds of Electronic Wires(0.5mm2)
22
20
許
18
容
電
16
流
14
(A)
12
Permissible current(A)
10
AEX-30
8 (耐熱150℃)
(Temp. class 150℃)
AEX
6 (耐熱120℃)
(Temp. class 120℃)
4
AVX AEX-28
2 (耐熱100℃) (耐熱140℃)
(Temp. class 100℃) (Temp. class 140℃)
0
-40 -20 0 20 40 60 80 100 120 140 160
周囲温度(℃)
Ambient Temperature(℃)
各種電線の許容電流(8mm2)
Permissible Current of Various Kinds of Electronic Wires(8mm2)
130
120
許
110
容
100
電
90
流
(A) 80
70
Permissible current(A)
60
50 AEX-30
(耐熱150℃)
40 (Temp. class 150℃)
AEX
(耐熱120℃)
30 (Temp. class 120℃)
20
AVX AEX-28
(耐熱100℃) (耐熱140℃)
10 (Temp. class 140℃)
(Temp. class 100℃)
0
-40 -20 0 20 40 60 80 100 120 140 160
周囲温度(℃)
Ambient Temperature(℃)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
SUPPLEMENTARY DATA
d2 d2
d2
外部インダクタンス : Le (mH/km) = 0.2ln = 0.4605 log10
d2 Outer inductance : Le (mH/km) = 0.2ln = 0.4605 log10
d1 d1 d1 d1
[ ] [ρ1 ρ2
]
−3
10 −3 ρ1 ρ2 10
Inner inductance : Li (mH/km) = +
内部インダクタンス : Li (mH/km) = + π f (MHz) d1 d2
π f (MHz) d1 d2
103ε = =
55.6ε 24.12ε
103ε = =
静電容量 : C (pF/m) = 55.6ε 24.12ε Capacitance : C (pF/m) =
d2 d2 d2
d2 d2 d2 18ln ln log10
18ln ln log10 d1 d1 d1
d1 d1 d1
Amount of leakage : G (μ /km) = 2πf (MHz)・C (nF/km)・tanδ×103
Ω
漏洩量 : G (μ /km) = 2πf (MHz)・C (nF/km)・tanδ×103
Ω
1 R (Ω/loop・km)
αr (np/km) = =
εf (MHz) [ ρ1 ρ2
+
d1 d2 ] 1 R (Ω/loop・km)
αr (np/km) = =
[ρ1
εf (MHz) d 1 + d 2
ρ2
]
2 Z ( Ω) 60 ln
d2 2 Z (Ω) 60 ln
d2
d1 d1
R (Ω/loop・km) = 0.0629
αr (dB/km) = 4.343 εf (MHz)
[ ρ
d
+ ]
ρ
d 1
1 2
2 R (Ω/loop・km) = 0.0629
αr (dB/km) = 4.343
[
εf (MHz) d
ρ 1
+
1
ρ2
d2 ]
Z ( Ω) log10
d2 Z (Ω) log10
d2
d1 d1
1 Attenuation constant by leakage :
漏洩減衰定数 :αg(np/km) = G ( /km)・Z (Ω) = 10.47f (MHz) ε tanδ
Ω
2 1
αg(np/km) = G ( /km)・Z (Ω) = 10.47f (MHz) ε tanδ
Ω
αg(dB/km) = 4.343G ( /km)・Z (Ω) = 90.9f (MHz)・ ε tanδ
Ω
2
減衰定数 : α =αr +αg αg(dB/km) = 4.343G ( /km)・Z (Ω) = 90.9f (MHz)・ ε tanδ
Ω
位相定数 : β(rad/km) = 2πf (MHz) L (H/km)C (F/km) Attenuation constant : α=αr +αg
= 2πf (MHz) L (mH/km)C (nF/km) Phase constant :β(rad/km) = 2πf (MHz) L (H/km)C (F/km)
2π 20 = 2πf (MHz) L (mH/km)C (nF/km)
= = πf (MHz) ε
λ(km) 3 2π 20
= = πf (MHz) ε
β(度/km) = 1200f (MHz) ε λ(km) 3
β(deg/km) = 1200f (MHz) ε
特性インピーダンス :
Characteristic Inpedance :
60
L (H/km) = ln
Z∞(Ω) = d 2 =138・1
log10 d 2 = 60k ln d 2 60
L (H/km) = ln
Z∞(Ω) = d 2 =138・1
log10 d 2 = 60k ln d 2
C (F/km) ε d1 ε d1 d1 C (F/km) ε d1 ε d1 d1
d 2 104
=138・1k log10 =
ε d 2 104
=138・1k log10 =
ε
d1 3 C (nF/km) d1 3 C (nF/km)
100MHz以上の比較的低周波では In low frequency (>100MHz)
Z0 = Z∞+ΔZ0 (1−j ) Z0 = Z∞+ΔZ0 (1−j )
1.98
ΔZ0 =
(
k1
+ )
k 2 , k 12=ρ1/ρ0, k 2 2=ρ 2/ρ0
ε f d 1 d 2
1.98
ΔZ0 =
( )
k 1 k 2 , k 12=ρ1/ρ0, k 2 2=ρ 2/ρ0
+
ε f d 1 d 2
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
その他 OTHERS
合成誘電率 : 内部導体 Total dielectric constant :
εA εBP tanδ =εAR tanδBQ tanδA inner
ε = , conductor εA εBP tanδ =εAR tanδBQ tanδA
ε = ,
εAR +εBQ εBR +εBQ εAR +εBQ εBR +εBQ
絶縁体
Aを空気とすれば、εA =1、tanδA =0となり insulation Regard A as air, εA = 1 and tanδA = 0,
εBP , tanδ = R tanδB
ε = B A εBP , tanδ = R tanδB
ε =
外部導体
R +εBQ R +εBQ R +εBQ R +εBQ
external
ここに conductor
d 2 , Q = ln d 3 , R = ln d 2
P = ln d 2 , Q = ln d 3 , R = ln d 2 d1 P = ln
d1 d1 d3
d1 d1 d3 d3
d2 Propagation velocity :
伝播速度 :
2πf (MHz) 1 5
= 3 10 2πf (MHz) 5
v (km/sec) = = v (km/sec) = 1
= = 3×10
β(rad/km) L (H/km)C (F/km) ε β(rad/km) L (H/km)C (F/km) ε
波長 : Wavelength :
v (km/sec) 2π 0.3
λ (km) = = =
f (MHz) β (rad/km) f (MHz) ε v (km/sec) 2π 0.3
λ (km) = = =
f (MHz) β (rad/km) f (MHz) ε
波長短縮率 : k = 1 Contraction rate of wavelength : k = 1
ε ε
等価導体層厚 : Equivalent thickness of conductor :
5 ρ(mμΩ・cm) 5 ρ(mμΩ・cm)
t (mm) = 103 t (mm) = ×10−3
π μ・f (MHz) π μ・f (MHz)
Cu : ρ = 1724…μ = 1…t = 0.0661/ f (MHz) Cu : ρ = 1724…μ = 1…t = 0.0661/ f (MHz)
Al : ρ = 2620…μ = 1…t = 0.0809/ f (MHz) Al : ρ = 2620…μ = 1…t = 0.0809/ f (MHz)
Sn : ρ = 11400…μ = 1…t = 0.170/ f (MHz) Sn : ρ = 11400…μ = 1…t = 0.170/ f (MHz)
Pb : ρ = 21900…μ = 1…t = 0.236/ f (MHz) Pb : ρ = 21900…μ = 1…t = 0.236/ f (MHz)
Fe : ρ = 10000…μ = 100…t = 0.0159/ f (MHz) Fe : ρ = 10000…μ = 100…t = 0.0159/ f (MHz)
x
表皮作用による電流密度変化 : ix = i 0et
x
Variation of current density due to skin effect : ix = i 0e− t
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
金属の物理的性質 PHYSICAL PROPERTIES OF METAL MATERIALS
体積固有抵抗 体積固有抵抗 熱起電力 比 重 線熱膨張係数 溶融点
VOLUME 温度係数 THERMOELECTRO- SPECIFIC THERMAL MELTING
RESISTANCE TEMPERATURE MOTIVE FORCE GRAVITY EXPANSION POINT
金 属
(20℃) FACTOR OF (mV) (20℃) COEFFICIENT (℃)
METAL
(μΩ・cm) VOLUME (× 10-6)
RESISTANCE (20℃)
(20℃付近にて 1℃につき)
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
ゴム・プラスチックケーブル構成材料の物理的性質
PHYSICAL PROPERTIES OF RUBBER&PLASTICS WHICH ARE USED FOR CABLES CONSTRUCTIVE MATERIALS
比 重 抗張力 伸び 比誘電率 誘電正接 破壊電圧 体積固有 連続使用
SPECIFIC TENSILE ELONGATION DIELECTRIC DIELECTRIC BREAKDOWN 抵抗 温度
材 料 GRAVITY STRENGTH (%) CONSTANT TANGENT VOLTAGE VOLUME CONTINUOUS
MATERIAL (20℃ ) (MPa) (60 〜 1 kHz) (60 〜 1 kHz) (AC) RESISTANCE WORKING
(20℃ ) (20℃ ) (kV/mm) (20℃ ) TEMPERATURE
(% ) ( Ω・cm) (℃ )
天然ゴム(絶縁用)
1.30 〜 1.60 8 〜 18 400 〜 600 3 〜 4.50 1.50 〜 3 20 〜 30 1015 − 55 〜 60
NATURAL RUBBER (for insulation)
天然ゴム (シース用)
1.20 〜 1.50 14 〜 18 400 〜 600 — — — 108 〜 1010 − 55 〜 60
NATURAL RUBBER (for jacket)
SBR(スチレンブタジェンゴム)
1.30 〜 1.60 4〜8 400 〜 650 3.50 〜 4.50 2〜5 20 〜 30 1013 〜 1014 − 50 〜 75
SBR (Styrene butadiene rubber)
ブチルゴム(絶縁用)
1.40 〜 1.50 4〜6 450 〜 800 3 〜 4.50 1 〜 2.50 20 〜 30 1014 〜 1016 ー 40 〜 80
BUTYL RUBBER (for insulation)
樹脂加硫ブチルゴム
1.40 〜 1.50 — — — — — — − 40 〜 100
RESIN VULCANIZED BUTYL RUBBER
珪素ゴム
1.20 〜 1.70 4〜6 200 〜 400 3〜5 2〜4 15 〜 20 1014 〜 1015 − 80 〜 180
SILICONE RUBBER
ハイパーロン
1.40 〜 1.70 8 〜 12 200 〜 350 5.50 〜 7 3〜5 20 〜 30 1013 〜 1014 − 25 〜 90
HYPALON
クロロプレンゴム(シース用)
1.40 〜 1.60 12 〜 16 400 〜 600 — — — 1010 〜 1012 − 40 〜 70
CHLOROPRENE RUBBER (for jacket)
ポリ塩化ビニル
1.20 〜 1.50 13 〜 25 200 〜 400 5〜7 8 〜 15 20 〜 40 1012 〜 1015 − 20 〜 60
POLYVINYL CHLORIDE
ポリエチレン
0.92 13 〜 17 500 〜 550 2.30 0.03 35 〜 45 1017 〜 1018 − 60 〜 75
POLYETHYLENE
架橋ポリエチレン
0.92 14 〜 20 400 〜 520 2.30 0.03 35 〜 45 1017 〜 1018 − 60 〜 100
CROSS-LINKED POLYETHYLENE
ポリ四弗化エチレン(PTFE)
2.10 〜 2.20 20 〜 40 150 〜 250 2.00 0.05 15 〜 20 1017 〜 1018 − 90 〜 260
POLYTETRAFLUOROETHYLENE (PTFE)
ナイロン
1.09 〜 1.14 50 〜 70 90 〜 300 3.50 1〜4 12 〜 20 1010 〜 1014 − 40 〜 130
NYLON
エチレンプロピレンゴム
1.30 〜 1.40 7〜8 400 〜 650 4〜5 0.50 〜 2 30 〜 40 1012 〜 1015 − 40 〜 90
ETHYLENE PROPYLENE RUBBER
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
SUPPLEMENTARY DATA
最大許容値 ppm
MAXIMUM ALLOWABLE VALUE
物質名
MATERIAL RoHS 指令 ELV 指令
RoHS DIRECTIVE ELV DIRECTIVE
鉛
1,000 1,000
LEAD (Pb)
水銀
1,000 1,000
MERCURY (Hg)
カドミウム
100 100
CADMIUM (Cd)
六価クロム
1,000 1,000
HEXAVALENT CHROMIUM (Cr6+)
ポリ臭化ビフェニル
1,000 −
POLY BROMINATED BIPHENYL (PBB)
ポリ臭化ジフェニルエーテル
1,000 −
POLY BROMINATED DIPHENYL ETHER (PBDE)
注1)最大許容値は均質材料(機械的に異なる材料に分解できな Note 1) T
he maximum allowable value is a value per
い材料)あたりの値。 homogeneous material (a material that can not be
mechanically decomposed into different materials).
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
■補足:有害物質の測定方法について ■ Supplement: Measurement method for hazardous substances
ELV 指令、RoHS 指令(PBB、PBDE といった特定臭素系物質 The actual measurement evaluations of controlled substances in
を規制に含む)での規制物質の実測評価には、次の代表的な方法 the ELV Directive and the RoHS Directive (which includes the
があります。 controls on the specific brominated substances such as PBB and
PBDE) include the following representative methods.
エネルギー分散型 プラズマ発光 ジフェニルカルバジド ガスクロマトグラフ
蛍光 X 線分析 分光分析(ICP) 吸光光度分析 質量分析
項目 ENERGY DISPERSIVE INDUCTIVITY COUPLED DIPHENYLCARBAZIDE GAS CHROMATOGRAPH
ITEM X-RAY FLUORESCENSE PLASMA ATOMIC EMISSION ABSORPTION MASS SPECTROMETRY
SPECTROMETRY SPECTROMETRY (ICP) SPECTROPHOTOMETRY
分析対象 Cd, Pb, Hg, 総 Cr, 総 Br
Cd, Pb, Hg Cr6+ PBB, PBDE
SUBJECT OF ANALYSIS Cd, Pb, Hg, total Cr, total Br
検出限界
50 ppm 10 ppm 2 ppm 5 ppm
DETECTION LIMIT
用途 定性スクリーニング分析 定量精密分析
USE Qualitative screening analysis Quantitative precision analysis
非破壊検査が可能 前処理が必要 前処理が必要 ソックスレー管での抽出
備考 簡便、前処理不要 時間がかかる 時間がかかる 時間がかかる
REMARKS Non-destructive inspection possible, Pretreatment required, Pretreatment required, Extraction with soxlet tube,
simple, no pretreatment required time-consuming time-consuming time-consuming
蛍光 X 線分析は、検査所要時間が短く、非破壊での検査も可能で The fluorescent X-ray analysis, which requires a short time for
あるため、定性分析ではあるものの、一定の基準値を決めてスク inspection and allows a non-destructive inspection, although being
リーニングとして広く日常的に運用されております。このスクリ qualitative analysis, is widely used commonly as a screening with
ーニング分析で仮に一定基準を超過した場合は、各種の定量分析 a certain standard value specified. If such a standard is exceeded
を行うことになります。 in a screening analysis, various quantitative analyses shall be
なお蛍光 X 線分析では、下記の制約があります。 conducted.
The fluorescent X-ray analysis has the following restrictions.
(1) 総クロムとしては検出できるが、六価クロム(Cr6+)含有を個
(1) T he amount of total chromium can be detected, but the
別に検出できない。このため一般的には総クロムの検出値が
hexavalent chromium (Cr6+) content can not be detected
基準値を超過しないことを確認することになる。
separately; therefore, it shall be confirmed as a rule that the
(2)臭素系物質(RoHS 規制対象の PBB、PBDE でなくても)を detected amount of total chromium dose not exceed the
含有する物質では、臭素(Br)の検出波形が他環境負荷物質 standard value.
の波形を覆い隠す場合もあるため、他の定量分析方法を必要と (2) For substances that contain brominated substances (not
することがある。 limited to PBB or PBDE, the RoHS control subjects), the
detection waveform of bromine (Br) may cover over the
waveforms of other environmental load substances; therefore,
other quantitative analysis methods may be required.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
5. お問い合わせの多い化学物質について 5. Chemical Substances on Many Inquiries
(1) フタル酸エステル (1)Phthalates
欧州では、玩具用途において 6 種類のフタル酸エステルの使用 Regulation of 6 kind of phthalate has been carried out for toy
規 制 が 2007 年 1 月 16 日 か ら 施 行 さ れ て い ま す(DIRECTIVE application by DIRECTIVE 2005/84/EC since January 16, 2007.
2005/84/EC)。さらに DEHP(フタル酸エチルヘキシル)など 4 4 kinds of phthalate, ex. DEHP(Di-ethyl Hexyl phthalate), are in
種類のフタル酸エステルが REACH の SVHC 候補となっています。 the candidate list of REACH SVHC. The phthalate is generally
フタル酸エステルは PVC の可塑剤として非常に一般的に使用さ used as plasticizer for PVC. Therefore it is difficult to prevent
from mixing or contamination of the phthalate with conventional
れているもので、従来の PVC 電線ではフタル酸エステルの混入
PVC wire. Our halogen free wires are manufactured in phthalate
や汚染を防止するのが困難でした。当社のハロゲンフリー電線は
free process, you can use it as the phthalate free wire.
フタル酸エステルの汚染を排除した工程にて製造されており、フ
タル酸エステルフリーの電線としてお使い頂けます。
(2)PFOS(perfluorooctane sulfonate)
(2)PFOS(パーフルオロオクタンスルホン酸) It has been banned that the product which contains
DIRECTIVE 2006/122/EC より 2008 年 6 月 27 日以降、指定 PFOS(perfluorooctane sulfonate) or relates of PFOS exceeding
含有量を超える PFOS(パーフルオロオクタンスルホン酸)およ certain amount is placed on the market by DIRECTIVE
びその類縁化合物を含む製品の EU 域内への上市が禁止されまし 2006/122/EC after June 27,2008. PFOS was used as water
た。PFOS は撥水剤などの用途に使用されていましたが、高い難 proof agent. It is very persistent, accumulative and also
分解性、高蓄積性があり、有毒性も疑われています。電子ワイヤ suspected of toxic. The PFOS and relates of it are not used in
ー製品には PFOS および類縁化合物の使用はございませんので、 our Electronic Wire products. Therefore you can use our
安心してお使い頂けます。 products without care of these chemical substances.
(3)Specific benzotriazole
(3) 特定ベンゾトリアゾール
2-(2H-1,2,3-benzotriazole-il)-4,6-di-tert-butylphenol(specific
2007 年 11 月 10 日に 2-(2H-1,2,3- ベンゾトリアゾール -2- イ
benzotriazole)has been designated as Class I Specified Chemical
ル )-4,6- ジ -tert- ブチルフェノール(特定ベンゾトリアゾール)
Substance of Japanese Law concerning the Evaluation of
が化審法の第一種特定化学物質 ( 実質的に製造・輸入が禁止され Chemical Substances and Regulation of Their Manufacture, etc,
る物質 ) に指定されました。この物質は紫外線吸収剤として樹脂 which is banned to manufacture and import actually November
に添加されていましたが、電子ワイヤー製品には特定ベンゾトリ 10,2007. This substance was added to plastic resin as
アゾールの使用はございませんので、安心してお使い頂けます。 UV-absorbance. However this substance is not used in our
Electronic Wire products. Therefore you can use our products
(4) フマル酸ジメチル(DMF) without care of this chemical substance.
DIRECTIVE 2009/251/EC により 2009 年 5 月 1 日以降、フ
マル酸ジメチルを含む製品の EU 域内への上市が禁止されまし (4)Di-methyl fumarate(DMF)
た。フマル酸ジメチルは防カビ剤として、家具などの中に小袋に After 1 May 2009, products containing Di-methyl fumarate
入れて使用されているものですが、人体に触れるとアレルギー反 (DMF) were prohibited from being placed on and sold on the
応を起こすことが問題となり、禁止されました。電子ワイヤー製 market in EU by DIRECTIVE 2009/251/EC. Di-methyl
fumarate is packaged in the small bags in furniture to prevent the
品にはフマル酸ジメチルを含む製品および梱包仕様はございませ
products from getting moldy. However, it causes allergic reaction
んので、安心してお使い頂けます。
when it touches human skin and it is prohibited. The DMF is not
used in our Electronic Wire products and its packing. Therefore
you can use our products without care of this chemical substance.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
6.環境関連回答フォーム
汎用的に使用される環境負荷物質調査フォームを示します。いずれのフォームでも提出対応が可能です。
Table in below indicates regular format for environmental hazardous substances report. SEIW can issue every format.
分野 形式 概要
FIELD FORM DESCRIPTION
製品中の含有化学物質データ情報伝達のため、IPC(Institute
for Interconnecting and Packaging Electronic Circuits)が標
医療 準化した pdf フォーマットです。
IPC1752
MEDICAL
PDF information format to inform Chemical substance in
products, standardized by IPC.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2011.04)
また、紛争鉱物と定義される金属(金、スズ、タングステン、タンタル)について由来を明確にするための調査フォーマットがあります .
In addition, survey format to declare its origin of 4 metals as defined conflict mineral(Gold, Tin, Tungsten, Tantalum)
対象 形式 概要
ITEM FORM DESCRIPTION
EICC/GeSI が発行する紛争鉱物調査フォーム。紛争鉱物
と定義される 4 金属の使用有無とその精錬所を情報伝達す
る為に策定されました。
これは、米国金融規制改革法第 1502 条において、米国に
上場している企業に紛争鉱物の使用について米国証券取引
紛争鉱物
EICC/GESI 委員会への報告が義務付けられたことによります。
CONFLICT MINERALS
EICC/GeSI issued to declare usage of 4 metals defined as conflict
metal and its smelters
This stands for US Dodd-Frank Wall Street Reform and Consumer
Protection Act Sec.1502 to disclose of usage conflict minerals.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2011.04)
SUPPLEMENTARY DATA
重量欄の数は銅比重 8.89 で計算したものです。 The values in the weight column are calculated with specific
gravity 8.89 for copper.
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)
直 径 断面積 重 量
ゲージ DIAMETER AREA WEIGHT
GAGE 公 称 最 小 公 称 最 小 銅
NOMINAL MINIMUM NOMINAL MINIMUM COPPER
AWG Mils (mm) Mils (mm) Cmils (mm2 ) Cmils (mm2 ) kg/km
1/0 324.9 8.252 322 8.18 105600 53.49 103488 52.42 475.5
2/0 364.8 9.226 361 9.17 133100 67.43 130438 66.80 599.4
3/0 409.6 10.40 406 10.31 167800 85.01 164444 83.31 755.9
4/0 460.0 11.68 455 11.56 211600 107.2 207368 105.1 953.0
※本カタログの仕様・構成等は性能改善の為、お断り無く変更する場合がございます。
※ This specification is subject to change without a prior announcement.
(2014.02)