Professional Documents
Culture Documents
Rockwell logo
Automation
Listen
Think
Solve
Support Center
Get Support
Training & Webinars
Online Forum
samuel.mor…
My
logo
TechConnect
ADD TO FAVORITES
Document ID
QA22460
Published Date
02/14/2020
Summary
RSLogix 5000: Type 10 Code 14 Minor Fault
Question
Why do I have a type 10 code 14 minor fault?
Answer
Type 10: Energy Storage Fault
The fault is linked to faulty ESM(energy storage module) in 1756-L7X and CompactLogix 5370 controllers with
internal ESM.
The ESM needs to be replaced due to a hardware fault. It is not capable of maintaining the WallClockTime
attribute or controller program at power down.
The energy storage takes about 3 seconds to charge, so on power up the fault may be present for 3 seconds.
For a brand new out of the box controller, it takes about 30 seconds to charge up.
More information can be found in 502060 - RSLogix 5000 software list Battery as one of the minor faults for
CompactLogix 5370 controllers.
Refer also to the Logix5000 Controllers Major and Minor Faults Programming Manual Publication 1756-PM014 for
additional major and minor fault information.
Attachments
RATE CONTENT
Recently Viewed
DISCLAIMER
This knowledge base web site is intended to provide general technical information on a particular subject or subjects
and is not an exhaustive treatment of such subjects. Accordingly, the information in this web site is not intended to
constitute application, design, software or other professional engineering advice or services. Before making any
decision or taking any action, which might affect your equipment, you should consult a qualified professional advisor.
ROCKWELL AUTOMATION DOES NOT WARRANT THE COMPLETENESS, TIMELINESS OR ACCURACY OF ANY OF THE DATA
CONTAINED IN THIS WEB SITE AND MAY MAKE CHANGES THERETO AT ANY TIME IN ITS SOLE DISCRETION WITHOUT
NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS "AS IS." IN NO EVENT SHALL
ROCKWELL BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL,
LOSS PROFIT OR DAMAGE, EVEN IF ROCKWELL AUTOMATION HAVE BEEN ADVISED ON THE POSSIBILITY OF SUCH
DAMAGES.
ROCKWELL AUTOMATION DISCLAIMS ALL WARRANTIES WHETHER EXPRESSED OR IMPLIED IN RESPECT OF THE
INFORMATION (INCLUDING SOFTWARE) PROVIDED HEREBY, INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, AND NON-INFRINGEMENT. Note that certain jurisdictions do not
countenance the exclusion of implied warranties; thus, this disclaimer may not apply to you.
www.rockwellautomation.com