Professional Documents
Culture Documents
Connector Assignment of X5 at Control Unit HM Rear Module: Pin As S Ignment
Connector Assignment of X5 at Control Unit HM Rear Module: Pin As S Ignment
Pin as s ignment :
- 2 : Frame CAN bus : CAN high line from base module (GM)
- 5 : Frame CAN bus : CAN low line from base module (GM)
- 7 : Ground line of brake wear sensor (B42 , B43) at rear axle 2 , Ground cable of fuel level sensor 2 (MAPPS)
- 10 : Not assigned
- 12 : Not assigned
- 19 : Not assigned
- 21 : Not assigned
Ce ll co -ordinate : 9,5