inno
HD1100J / HD1600J
High Density Polyethylene Resin
InnoPlus HD1100J and HDTG00J aro high density polyethylene injection molding gracta. They are tailored with narrow
molecular weight aistnbution (MWD) anc righ flow ably. They have optimum steength propery which used for generel
part, aulo part. toy anc house ware
Typical Application : Toys, Auto paris, Household products
Typical Properties :
Properties Typical Value Unit Test Method
Hor100 Ho te0
cope Propecioe
Mat Flow Rate (90°C. 2 18 ka) 18 2 10 min ASTM D1239
Density 9958 ase glen ‘ASTM D105
Vist Satering Pont @ 10N, 59 Cite 16 18 mS ASTD125,
sting Point 128 12 "c ASTIN 3418
Mechanical oper
Tons Senha Yieks 00 220 koe? sin Des
Tensile Suenatn @ Break 230 20 Kalen ‘STM D508
Elongation Break °° 210 * ‘ASTM D08
stress 0c00 2000) gier ‘asta D787
Fura Mobis 12800 13800 | kage? Asn 0730
Netched tod impact Srerath air ator Faerie ASTM C258
Pvomater Hardness 64 wa Stored asm p2240
ESCR,F,(condlonB, 25 % Igopa ital oak 5 is ASTM 01695,
76 = Conpiete Brak
Recommendation :
atuder temperature : 165- 190°C
Nozzle temperature: 160 - 185°C
FDA Statement :
HDPE under the brand InnoPlus complies with U.S. FDA 21 CFR 177.1520 regulation for polyethylene used in articles that
Contact food except fr articles used for packaging or holding feod during cooking,
Not : Properties rotted hare are ypical valves ofthe prac, oo be conetcored as spaciotons
PTT Globo hemical makes no oaxeseratons 931 the aecuaey or complatanass a ha information contained hein,
PIT Poymer aetog Cangany Linkec
uy cos ling AP or 58 VBavs Raconk ROG, Chek aro 0D Te 66 2B