Professional Documents
Culture Documents
Preferred Device
SWITCHMODE
Power Rectifier
D2PAK Surface Mount Power Package
The D2PAK Power Rectifier employs the Schottky Barrier principle
with a platinum barrier metal. These state−of−the−art devices have the
following features: http://onsemi.com
• Center−Tap Configuration
• Guardring for Stress Protection SCHOTTKY BARRIER
• Low Forward Voltage RECTIFIER
• 150°C Operating Junction Temperature 30 AMPERES
• Epoxy Meets UL94, VO at 1/8″ 45 VOLTS
• Short Heat Sink Tab Manufactured — Not Sheared!
• Similar in Size to the Industry Standard TO−220 Package
Mechanical Characteristics 1
• Case: Epoxy, Molded, Epoxy Meets UL94, VO 4
• Weight: 1.7 grams (approximately) 3
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
4
260°C Max. for 10 Seconds
• Shipped 50 units per plastic tube 1
• Available in 24 mm Tape and Reel, 800 units per 13″ reel by adding a 3
“T4” suffix to the part number
D2PAK
• Marking: B2545 CASE 418B
• Device Meets MSL1 Requirements STYLE 3
• ESD Ratings: Machine Model, C (>400 V)
Human Body Model, 3B (>8000 V)
MARKING DIAGRAM
MAXIMUM RATINGS (Per Leg)
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage VRRM 45 V B2545
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
Average Rectified Forward Current IF(AV) 15 A
(Rated VR, TC = 130°C) Total Device 30 B2545 = Device Code
Peak Repetitive Forward Current IFRM 30 A
(Rated VR, Square Wave, ORDERING INFORMATION
20 kHz, TC = 130°C)
Device Package Shipping†
Non−Repetitive Peak Surge Current IFSM 150 A
(Surge Applied at Rated Load MBRB2545CT D2PAK 50/Rail
Conditions Halfwave, Single
Phase, 60 Hz) MBRB2545CTT4 D2PAK 800/Tape & Reel
Peak Repetitive Reverse Surge IRRM 1.0 A †For information on tape and reel specifications,
Current (2.0 s, 1.0 kHz) including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Storage Temperature Range Tstg −65 to +175 °C Brochure, BRD8011/D.
Operating Junction Temperature TJ −65 to +150 °C
Preferred devices are recommended choices for future use
Voltage Rate of Change dv/dt 10,000 V/s and best overall value.
(Rated VR)
100 200
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
100
20 100C 4 100C
25C
2
1
10 75C
0.4
7 0.2
5 0.1
3 0.04
0.02 25C
2 0.01
0.004
1 0.002
0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 50
vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage, Per Leg Figure 2. Typical Reverse Current, Per Leg
PF(AV), AVERAGE FORWARD POWER DISSIPATION (WATTS)
32 32
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
SQUARE WAVE
28 TJ = 1255C 28
IPK DC
24 (RESISTIVE LOAD) IAV
=π 24
DC
20 20
(CAPACITIVE
5
SQUARE
16 LOADS)
16 WAVE
10
12 IPK 12
IAV
= 20 RATED VOLTAGE APPLIED
8 8 RJC = 1.5C/W
4 4
0 0
0 4 8 12 16 20 24 28 32 36 40 110 120 130 140 150
IF, AVERAGE FORWARD CURRENT (AMPS) TC, CASE TEMPERATURE (°C)
http://onsemi.com
2
MBRB2545CT
PACKAGE DIMENSIONS
D2PAK
CASE 418B−04
ISSUE H
NOTES:
1. DIMENSIONING AND TOLERANCING
C PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
E 3. 418B−01 THRU 418B−03 OBSOLETE,
V NEW STANDARD 418B−04.
−B−
W
INCHES MILLIMETERS
4
DIM MIN MAX MIN MAX
A 0.340 0.380 8.64 9.65
B 0.380 0.405 9.65 10.29
A C 0.160 0.190 4.06 4.83
D 0.020 0.035 0.51 0.89
S
1 2 3 E 0.045 0.055 1.14 1.40
F 0.310 0.350 7.87 8.89
G 0.100 BSC 2.54 BSC
H 0.080 0.110 2.03 2.79
−T− K J 0.018 0.025 0.46 0.64
SEATING W K 0.090 0.110 2.29 2.79
PLANE
G J L 0.052 0.072 1.32 1.83
M 0.280 0.320 7.11 8.13
H N 0.197 REF 5.00 REF
D 3 PL P 0.079 REF 2.00 REF
R 0.039 REF 0.99 REF
0.13 (0.005) M T B M S 0.575 0.625 14.60 15.88
VARIABLE V 0.045 0.055 1.14 1.40
CONFIGURATION
ZONE N P STYLE 3:
R PIN 1. ANODE
U 2. CATHODE
3. ANODE
L L L 4. CATHODE
M M M
F F F
SOLDERING FOOTPRINT*
0.33
8.38
0.42 0.24
10.66 6.096
0.04
1.016
0.12
3.05
0.67 inches
17.02 mm
http://onsemi.com
3
MBRB2545CT
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com MBRB2545CT/D
4
This datasheet has been download from:
www.datasheetcatalog.com