Professional Documents
Culture Documents
Read Me
Read Me
Parts list:
1 x 28MM M3 bolt
1 x M3 bolt
1x M3 Nut
Printing Guide:
Print the upper cup part with the rim flat on the bed and supports everywhere.
Print the base standing as it would on a table, no supports needed. Same with Ball.
Assembly tips:
The nut is designed to glued into the cup part Nylock nuts work best.
If making a resin ball you will need to sand 2 opposite faces flat to match the
ball
as the cavity is not spherical.
Finishing Tips:
My usally process is to sand the entire piece to 120 grit before applying filler
primer.
I then spray everything black satin/gloss before using a gold top coat
without fully covering which leaves a slight patina effect.