Bulletin 9
asker
GUS SAMPLER
(Gregory Undisturbed Sampler]
This unique, air or hydraulic piston sampler was designed
and test proven in the drilling field for many years. The
design allows the sampler to be classed as a truly undis-
turbed piston sampler producing high production sampling.
HOW IT WORKS
The GUS Samper is assembled on a drill rod and
lowered to the bottom of a cleaned bore hole.
The drill rod may be chucked by means of a
chucking rod. A water swivel is attached with 2
hose line coupled to the swivel and the pressure
pump.
As the water or air pressure is applied to the drill
rods at approximately 100 to 600 PSI, the piston
in the head of the assembly forces the thin wall
sample tube in the soft underlying soil or clay
‘materials to take the sample.
Once the sampler reaches the end of its ma)
mum travel, the water or air used for pressing
exhausts through @ relief hole and returns im-
mediately to the surface. This isa signal to the
operator that the sample has been taken to its
maximum depth,
Depending upon the materials being sampled,
the sampling may take only a few seconds or
as much as one minute to reach its maximum
travel
A compressed air bottle or tank may be used
in lieu of a fluid pump for pressing the sample,
however, one must be careful to limit tank pres-
sure to prevent “over pressure” which may col-
lapse the sample tube.
After the sample has been taken, the rods and
sampler are pulled to the surface and the sam-
pler is layed out on the work table for removing
of the sample tube containing the sample.
The outer tube of the sampler containing the
sample is rotated in a counter clockwise direc-
tion three turns which releases the “vacuum
lock” created over the sample in the sample
tube and allows for easy removal of the sample
tube from the assembly. A new sample tube is
then installed on the sampler head for adcition-
altests and the procedure repeated
k
‘ying
Sacre
ndee——$>
IN OPERATION
(1) The hole Is drilled by rotary means and pre-
pared by using either casing or drilling mud to
support the overburden,
(2) The drill rods extending the sampler to the
bottom of the hole may be clamped to the cas-
ing to prevent upward movement from down
thrust of fluid or air pressure used...or rods may
bbe connected to the chucking rod in rotary drill
head.
(3) A water swivel or adaptor is used to direct
fluid or air into the drill string to operate the
sampler.
(4) positive displacement pump or com-
pressed air is used to exert pressure on the stax
tionary piston of the sampler. Pressure range
normally required is 100 to 600 PSI for at least
cone minute,
FEATURES OF THE GUS SAMPLER
Bore hole size need not be larger than sampler
‘+ Avaliable in 4 popular sizes - 2-1/2", 3", 3-1/2",
St (63.5, 76.2, 88. & 127 mm)
‘+ Fluid orair under pressure is required to oper-
ate sampler
+ Simple to operate -there sno need for actuat-
Ing rods or complicated procedures
+ Uses standard ASTM thin wall steel sampler
tubes with standard holes and cap screws
‘= Sampler adapts directly to standard AWW or NW
dri rods
‘+ Used im holes cased with mud, steel casing or
self supporting auger holes
‘+ Piston closes off sampler until sample is taken
‘+ Maximum length of sample recovered is 24”
(609.6 mm)
‘+ Maximum pressure required - 100 to 600 PSI
‘+ Stainless steel actuating cylinder
“= Drill rig is not necessary for sampling; how-
fever, hoist is required to lit tools and sampler
from the drill hole
‘+ Inexpensive when compared to other compa-
rable types of samplers
P.O. Box 830, Scranton, PA 18501 USA
Toll Free: 800.752.2537 Fax: 570.586.2659
DRILL COMPANY 3 E-Mail: sales@ackerdril.com Website: www.ackerdrill comBulletin 9
HPeruan | aerate | w Pane | sam" Pane | SvPane
Rd Connection Head “AW uw NW ny
1 | __Tike Sampler 1 ‘o0es-a | v200s74 | vaoouni | ra0w0e4
2 | Adapter od Box) | 1 vores. | ra0rees | ‘aoreea | _r207s04
a Cylinder fi ‘oreo. | v207ee2 | raoree9 | r207ee4
4 Rea, Piston 7 t2oe00-1 | rane006 | 1208006 | 1200004
5 Tube, Inner 4 zoaot-1 | *20e0-2 | r20eor-a | _120801-4
| tate, Release 7 voeo2-1 | va0e022 | r20a023 | v20e02
7 | __ Retainer 1 r20e0s-1 | 1200002 | 1200003 | _r20e00
& | Paton 1 ‘oene1 | 1202002 | 1208043 | _r20e0e4
‘Adaper(nner Tube to
oy [cease 1 r0e0s-1 | 1202082 | 120203 | 1200084
10 | carer Te fi taoe0e-1 | ra0e082 | 1208062 | 1200084
u Nut i voeo7- | va0e072 | r20eor2 | 0900-16
2 Spacer + | #5000506 | isonas-a12 | ssooss-007 | 1s00asa76
13) Cup, Packing 2 | sso0s-14 | 150086-11 | _150046-12 | 160048.00
4 | Washer Leather + | ss00es-e7 | as0045-71 | 1s004s-71 | v600e6-11
15 Ralsn + | ovorar214 | ooorar-are | onrazz-a7 | osorora1s
Ae) | ong eeen st 3 osotos-s2s | oso108ss2 | osotoe-s36 | os0108-s48
7 Coecns v1 | va0esa0 | saoesz0 | 0662-0 | 1200820
5 O-Ring + | oeot0e-112 | ooor0e-a10 | onorae-210 | osot0e-214
: Oi Seal 2 | os0es-22 | 000s63-s7 | ovos6s-s7 | _090069.73
= [Grease Fiting 1 | ce0ss0-16 | o903se-16 | ovosse-16 | os0360-16
"Assembly and Sample Tubes
‘Assembly | Head | Soil Seals for ‘Caps for be ar
size Reta cowlopdty he cprton of he
Parts | Conn. | Samplo Tubes | Sample Tubos | Tra""estdelonay nm cowaton of
Bam | oxzrees | aw | 1206722 | onoerag | Terie cunatoadbe tached when,
| vzavaz2 | nw | 206723 | 0906765 | Sracaing te sano sbve ground
saz] oa | Nw | NA 000967.56 | Maram operting pressure -60 PSL
= | ozoraes | nw | ‘208725 | oooaer-so
‘Specifications - GUS SAMPLER Air or Hydraulic (Water) Piston Sampler
Threadin | Sampler | _ Sampler Operating Pressure
‘Sampler Size | Head Conn. ‘Stroke _| Tube Length Nominal ** Wt of Assy.
: - 7 ~ | _r00t0 600°) | aes
27 (635mm)| awRed | 24° (600mm) | 90° 762mm | 2347" | (,200SSFS | soins (1940)
‘i ; ; 100 t0 600 PSI
s7e2mm | nwmes |24-(609mm | 30-crezmm| 2041 | c002S0FS | aries ct)
. i 5 100 t9 600 PS!
sr (68am) | nwrca | 24° (600mm | 0° 762mm | 3306 | (,00SSPS | 51 ee co)
; ; 10010600 PSI ‘
c1270mm | wrod | 2¢"(600mm) | 20°«762 mm] 478 |p GCOISGFS., | 196105. (61 ko
Qa [ m- ke P.O. Box 830, Scranton, PA 18501 USA
Toll Free: 800.752.2537 Fax: 570.586.2659
DRILL COMPANY 3 ENait: sales@ackerdril.com Website: www.ackerdril.com
fy hatter Co. ne bg om fasting nee charg sg mei ym