Professional Documents
Culture Documents
Intrepid Series
Maximized capacity and reliability Intrepid & Intrepid Ultra
Backhaul | Licensed & Unlicensed
The proliferation of IP devices and applications have resulted in a backhaul bottleneck, where the channel size required to carry data efficiently exceeds the networks capacity. The MDS Intrepid Series combats this challenge by providing higher capacity, reduced interference, Quality of Service (QoS) and simple deployment options. The Intrepid Series is a cost effective, scalable, reliable and hardened backhaul solution that operates in the 2.3-2.4 and 4.8-6.0 GHz bands. In addition, Intrepid shares bandwidth between TDM and IP traffic, allowing for a smooth TDM to IP migration.
Application Flexibility
Native Ethernet and TDM traffic allowing for TDM to IP migration Multiple combinations of Ethernet and TDM ports Multiple configuration options including pointto-point and point-to-multipoint
Key Benefits
Up to 50 Mbps net throughput Smooth TDM to IP migration High reliability and signal quality Simple installation and maintenance with intuitive tools Industrially hardened to withstand extreme operating specifications
Secure
Built-in AES 128-bit encryption Password protected access and lockdown
Easy to Use
Link manager with Set-up Wizards for simple installation and configuration Easily change frequencies in the field Useful planning tools such as Spectrum View and Link Budget Calculator
Water & Wastewater SCADA monitoring and LAN/WAN networks Video surveillance, interconnect control centers
imagination at work
Intrepid Series
Application Flexibility
Intrepid Series can be deployed flexibly, either as a single pointto-point link or as multiple point-to-point links from a central site using Hub Site Synchronization (HSS) as an alternative to point-tomultipoint deployments. The unique burst synchronization technique synchronizes the transmission of collocated radios, reducing mutual interference commonly experienced with collocated radios if some transmit while others at the same site receive. The Intrepid Ultra Model supports multiple frequency bands in the same hardware, making it easy to change frequency in the field without any new hardware. Frequency bands can easily be changed using the Link Manager, an easy, intuitive management and diagnostic tool.
Reduced Interference
The Intrepid Series has built-in interference combating technology to keep the over-the-air signal clear and strong despite the interference that commonin unlicensed bands.
Backhaul
Backhaul
Reliable Communications
BER of 1.0E-11 with patented fast ARQ algorithm Native, low latency IP/Ethernet and TDM interfaces AMC and ACS facilitate easy changes for optimization in RF environments
Flexible Deployment
Multiple unlicensed frequencies Collocation of radios to optimize tower use via hub site synchronization Various channel size options facilitate best combination of range and speed
54
www.GEDigitalEnergy.com
Intrepid Series
Secure & Reliable Communications
To ensure link security, the Intrepid Series encrypts data transmitted over the air using advanced encryption standards (AES) with a 128-bit key. The MDS Intrepid Series is not only secure, but also reliable. In a 1+1 hot standby configuration, the automatic switchover from primary link to secondary link occurs within 50 miliseconds, with no impact on TDM services. Like the other GE MDS products, the Intrepid Series is hardened to survive in rugged, harsh, or remote environments where most industrial wireless networks are installed. Even in heavy rain or other extreme weather conditions, the Intrepid Series will continue to provide a wide, reliable, and robust backhaul channel.
Rear View
ODU Port
ODU Port
HSS Port
www.GEDigitalEnergy.com
55
OPERATING FREQUENCy BANDS FULL DUPLEx NET THROUGHPUT MAx RANGE MODULATION SCHEME CHANNEL SIzE AIR RATE / FULL DUPLEx NETTHROUGHPUT BPSK QPSK 16QAM 64QAM MAx Tx POWER RECEIVER SENSITIVITy (BER = 1.0E-11) BPSK QPSK 16QAM 64QAM INTERFACES DIMENSIONS
2.4, 4.9, 5.3, 5.4, 5.8 GHz 18 Mbps 80 km (50 miles) OFDM (BPSK, QPSK, 16QAM, 64QAM) 5, 10, 20 MHz 5 MHz Channel Size 10 MHz Channel Size 4.5/1.7 Mbps (k=0.5) 6/2.3 Mbps (k=0.5); 9/3.4 Mbps (k=0.75) 12/4.5 Mbps (k=0.5); 18/6.8 Mbps (k=0.75) 24/9 Mbps (k=0.66) 10 MHz Channel Size -90 dBm (k=0.5) -87dBm (k=0.5); -83 dBm (k=0.75) -85 dBm (k=0.5); -79 dBm (k=0.75) -69dBm (k=0.66)
50 Mbps 120 km (75 miles) MIMO-OFDM (BPSK, QPSK, 16QAM, 64QAM) 20 MHz 20 MHz Channel Size 13/4.9 Mbps (FEC k=0.5)
20 MHz Channel Size 9/3.4 Mbps (k=0.5) 12/4.5 Mbps (k=0.5); 18/6.8 Mbps (k=0.75) 24/9 Mbps (k=0.5); 36/13.5 Mbps (k=0.75) 48/18 Mbps (k=0.66) 20 MHz Channel Size -87 dBm (k=0.5) -84dBm (k=0.5); -80dBm (k=0.75) -79 dBm (k=0.5); -73dBm (k=0.75) -66 dBm (k=0.66)
2.25/0.8 Mbps (FEC k=0.5) 26/10.2 Mbps (k=0.5); 39/15.5 Mbps (k=0.75) 3/1.1 Mbps (k=0.5); 4.5/1.7 Mbps (k=0.75) 52/20.8 Mbps (k=0.5); 78/30.7 Mbps (k=0.75) 6/2.3 Mbps (k=0.5); 9/3.4 Mbps (k=0.75) 104/41.3 Mbps (k=0.66); 117/46.6 Mbps (k=0.75); 130/51.7 12/4.5 Mbps (k=0.66) Mbps (k=0.83) 25 dBm 23 dBm 20 MHz Channel Size 5 MHz Channel Size -88 dBm (k=0.5) -86 dBm (k=0.5); -83 dBm (k=0.75) -81 dBm (k=0.5); -80 dBm (k=0.75) -72 dBm (k=0.66); -70 dBm (k=0.75); -67 dBm (k=0.83) Ethernet: 2 Fast Ethernet ports TDM: 0, 4, 8 , or 16 T1/E1 ports IDU-E (enterprise): 43.6cm/17.2in W x 4.5cm/1.7in H x 21cm/8.3in D; 1.5kg/3.3lb ODU (integrated antenna): 37.1cm/14.8.4in W x 37.1cm/14.84in H x 9cm/3.6in D; 3.5kg/7lb ODU (external antenna): 18cm/7.2in W x 27cm/10.8in H x 5.5cm/2.2in D; 1.5kg/3lb IDU-E: 0C to +50C ODU: -35C to +60C IDU-E: 90% non-condensing ODU: IP67; up to 100% non-condensing IDU-E: -20 to -60 VDC, with optional AC/DC adapter IDU-E = 10W max IDU-E+ODU= 35W max 1+0, 1+1 space diversity split-mount -93 dBm (k=0.5) -90 dBm (k=0.5); -86dBm (k=0.75) -81 dBm (k=0.5); -80 dBm (k=0.75) -72dBm (k=0.66)
OPERATING TEMPERATURE RELATIVE HUMIDITy POWER INPUT (DUAL FEEDING) POWER CONSUMPTION CONFIGURATION
Ethernet: 1 or 2 Fast Ethernet ports TDM: 0, 1, 2, 4 T1/E1 ports IDU-E (enterprise): 43.6cm/17.2in W x 4.5cm/1.7in H x 21cm/8.3in D; 1.5kg/3.3lb IDU: 22cm/8.6in W x 4.4cm/1.7in H x 17cm/6.6in D; 0.5kg/1.1lb ODU (integrated antenna): 30.5cm/12in W x 30.5cm/12in H x 5.8cm/2.28in D; 1.5kg/3.3lb ODU: 13.5cm/5.3in W x 24.5cm/9.6in H x 4cm/1.5in D; 1.0kg/2.2lb IDU: -5C to +45C; IDU-E: 0C to +50C ODU: -35C to +60C IDU, IDU-E: up to 90% non-condensing ODU: IP67; up to 100% non-condensing IDU: 100-240 VAC , 50/60 Hz IDU-E: -20 to -60 VDC, with optional AC/DC adapter IDU +ODU= 10W max IDU-E + ODU = 14W max 1+0, 1+1 split-mount, all-indoor