You are on page 1of 3

Date: June 15, 2005 Subject: 2006 Outlander 800 EFI Introduction No.

2006-1
New Version of B.U.D.S.: 2.3.2

YEAR MODEL SERIAL NUMBER


2006 Outlander 800 EFI (all packages) All

TABLE OF CONTENTS
Pag e Pag e 2
OUTLANDER 800 EFI ............ .............. 1 Minimum System Requirements to Use
Programming the Outlander 800 ................ 1 B.U.D.S. and New MPI-2 ......................... 3
NEW B.U.D.S. VERSION: ....... .............. 2 If You Need Assistance ........................... 3
Multiline Dealers................................... 2 TRAINING .............. ............... ........... 3
Bombardier ATV Only Dealers ................... 2 Outlander 800 H.O. EFI........................... 3
B.U.D.S. ............................................ 3

OUTLANDER 800 EFI Programming the Outlander


BRP has introduced an all new model for 2006, 800
the Outlander 800 H.O. EFI. This communication
contains critical information your Service The 2006 Outlander 800 HO EFI adds D.E.S.S.
department should be aware of. (Digital Encoding Security System) key encoding
technology for added peace-of-mind.

vdd2006-001-041_a

There is a chip in the key. All chips have their own


vdd2006-001-030 code. All vehicles share the same key pattern;
the key code makes the difference.
N OT E : The new Outlander 800 H.O. EFI will
not start until a key code is programmed in
the vehicle's ECM using B.U.D.S.

Printed in Canada. (vbs2006-003 PM) 1/ 3


©2005 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
* Trademark of Bombardier Inc. used under license.
NEW B.U.D.S. VERSION:
BRP Utility Diagnostic Software (B.U.D.S.) is no
longer limited to our Sea-Doo or Ski-Doo product
line-up. With the introduction of the new 2006
Outlander 800 H.O. EFI, all the functionality of
B.U.D.S. is now available on this new model.

Latest B.U.D.S. Version at time of


printing: 2.3.2

B.U.D.S. software is well known by our Ski-doo and


Sea-doo dealers, but is new to the ATV only dealers.
ATV dealers must familiarize themselves with vdd2006-001-149
B.U.D.S. since it is now an essential tool to
program D.E.S.S. keys and to do troubleshooting. You will need to download the latest B.U.D.S.
The latest B.U.D.S. version is always available version from BOSSWeb to program the new
from BOSSWeb, under “ComCenter”, “B.U.D.S. 2006 Outlander 800 H.O. EFI. You can also
& MPEM” (www.bossweb.brp.com). order the B.U.D.S. installation CD, version
This is a list of typical tasks that can be 2.3.2, (P/N 529 036 024). The CD will be in
performed with B.U.D.S.: stock at the end of June, 2005.
Test, add or remove D.E.S.S. Keys When using the latest B.U.D.S. version, you
must contact a BRP Technology Support
Adjust engine parameters Representative to get an access code.
Activate vehicle functions
Monitor vehicle Bombardier ATV Only Dealers
Read and reset engine historical data If you are a Bombardier ATV only dealers:
Save vehicle information to disk The new MPI–2 components will be auto-shipped
Print vehicle information to you by the end of June, 2005.
Flash ECU/cluster

Multiline Dealers
If you are a Multiline dealer (Bombardier ATV
with Sea-Doo and/or Ski-Doo):
The VCK (MPI) can be used to operate BUDS,
therefore no additional hardware is needed.

vdd2006-001-148

MPI-2 components are:


– 529 036 018: MPI-2 interface card
– 710 000 851: diagnostic cable
– 529 036 024: B.U.D.S. 2.3.2 software CD

2/ 3 2006-1 Service
This hardware will replace the previous MPI From Canada: 1-800-361-9980 (option 2–3)
kit. It has the same function, and will work
on other BRP product lines. TRAINING
You must install the latest B.U.D.S. version Training is already available to get you
and contact a BRP Technology Support fully operational.
Representative to get an access code.
Make sure to install B.U.D.S. program before Outlander 800 H.O. EFI
connecting the MPI-2 on a computer, follow
Outlander 800 H.O. EFI: 2006 ATV Competitive
the instruction steps on the CD.
Edge DVD, (P/N 716 000 326)
In the future, you will be able to
Outlander 800 H.O. EFI: 2006 ATV Technical
download updated version from BOSSWeb
Update Book, Section 4A, (P/N 219 100 226).
(www.bossweb.brp.com).
The exam will be available June 15, 2005 on the
B.R.P.T.I. web site (www.brpti.brp.com).
Minimum System
Outlander 800 H.O. EFI: Shop Manual
Requirements to Use B.U.D.S. (P/N 219 100 228) will be available late
and New MPI-2 July, 2005 (Shop Manual sections will be
available earlier on BOSSWeb, ComCenter,
You will need a computer accessible in your Preliminary Shop Manual)
shop with the following requirements in order
to install and operate B.U.D.S.: Four-stroke engines: Bombardier Recreational
Product's Guide to Service Fundamentals and
Pentium processor or higher Principles, Chapter 3, (P/N 484 800 168)
One unused USB port (can be an add-on card) Four-stroke engines: Technical Training DVD
Microsoft Window 98, ME, Windows 2000, Volume 1, (P/N 219 700 197)
XP or more recent operating system ( Win95 V-810 Engine: Shop Manual (P/N 219 100 230)
and Win NT 4 do not support USB) available end of July 2005 (Shop Manual
12 MB of hard disk space for compact installation sections will be available earlier on BOSSWeb,
(20 MB recommended for typical installation) ComCenter, Preliminary Shop Manual)
Minimum 32 MB of RAM for Win98 (64 Fuel Injection Systems: Bombardier
MB or higher recommended), Minimum 64 Recreational Product's Guide to Service
MB of RAM for Win ME and Win 2000 (128 Fundamentals and Principles, Chapter
MB or higher recommended), 256 MB of 15, (P/N 484 800 168)
RAM or higher for Win XP Fuel Systems: Technical Training DVD Volume
A display resolution of 640 by 480 with 3: Fuel Injection Systems, (P/N 219 700 199)
at least 256 colors (800 x 600 with 65000
colors or 16 bits recommended) B.U.D.S.
3.5” floppy disk drive, USB memory card 2006 ATV Technical Update Book, Section
or CD-ROM drive to transfer disks if not 4B, (P/N 219 100 226)
connected to Web
Bombardier Recreational Product's Guide
to Service Fundamentals and Principles,
If You Need Assistance Chapter 9, (P/N 484 800 168)
For assistance installing B.U.D.S. software, feel
free to call a Technology Support Representative:
From US: 1-800-366-6992 (option 4)
From Canada: 1-800-361-9980 (option 4)
For assistance using B.U.D.S. troubleshooting a
vehicle, feel free to call a Technical Representative:
From US: 1-800-366-6992 (option 2–3)

Service 2006-1 3/ 3

You might also like