Islamic University of Technology (UT)
Organisation of Islamic Cooperation (OIC)
ME 4210 3D Solid Modeling and Assembling.
| Exercise at Task
Exercise 1 Intakt to SolidWorks
Exercise 2 2D Drawing
Exercise 3 | 2D Drawing
Exercise 4 3D Part Model
| Exercise 5 3D Part Model
Exercise 6 Spring, Spur Gear
Exercise 7 Bolt, Helical Gear
Exercise 8 3D Loft
Exercise 9 Assembly 1
Exercise 10 Assembly 2
QuizME 4210 3D Solid modeling and Assembling.
Tutorial 1
Draw the following 2D drawing on the front plan using Solidworks.
Save the drawings using the following file names in the Desktop, and then submit it to
the Teacher. Finally delete the files from the Desktop.
Drawing Hstudentsno_T1_D1 Drawing 2-)students no _T2_D2
Drawing 3studentsno_T3_D3 Drawing 4students no_T4_D4
E20) | 30 30 4
2.
20
100 ei
o ae
i JA a
| ie
| we
Save your drawing frequently in order to protect jit from any unusual reasons
Md Abdur SalmME 4210 3D Solid Modeling and Assembling.
Tutorial 2
Draw the following 2D Drawing on the front plan using Solidworks
Save the drawings using the following file names in the Desktop, and then submit it to the
Teacher. Finally delete the files from the Desktop.
Drawing] studentsno_T2_D1. Drawing? students no_T2_D2.
Drawing3 students no_T2_D3. Drawing4 students no_T2_D4.
All dimensions are in mm.
Save your drawing frequently in order to protect it from any unusual reasons. Me. abd ssen
Dialing insetME 4210 3D Solid Modeling and Assembling.
Tutorial 3
Create 3D Models of the following 3D Objects using SolidWorks.
Save the Models Using the following file names in the Desktop, and then
submit it to the Teacher.
Finally delete the files from the Desktop
Model 1> Student No_T3_M1 Model 2—>Student No_T3_M2
Model 3->Student No_T3_M3 Model 4—>Student No_T3_M4
All dimensions are in mm.
MA Selon
Drafting Instructori ME 4210 3D Solid Modeling and assembling
Tutorial 4.
Create 3D Models of the following four 3D objects using Solidworks
In the drawing, Layout the front view, top view, right side view, isometric
view. Give necessary dimensions, angle of projection and scale of the
drawing.
Model 13Student no_13.M1_ Model 1I[Drawing)—Student no_13_D1
Model 23Student no_I3.M2 Model 2{Drawing)—student no_13_D2
Model 33Student no-13_M3_ Model 3{Drawing)—>student no_T3_D3
Model 43Student no_I3.M4 Model 4[Drawing)-SStudent no_13_D4