Professional Documents
Culture Documents
OKMX8MM-C single board computer consists of SoM FETMX8MM-C and carrier board. The SoM was designed with
8-layer PCB in ENIG processing based on NXP i.MX8M Mini processor with frequency up to 1.8GHz, it has a compact
appearance with dimensions of 56mmx 36mm. The SoM is with three ultra thin connectors with height of 2.0mm
connectors on its back for connecting with carrier board and anti-plug mark for the sake of users to avoid misconnection.
Various interfaces are available for connecting peripherals, such as PCIe2.0, Gigabit Ethernet, SDIO/ eMMC, USB2.0,
MIPI-CSI, MIPI-DSI, etc. In software, Linux4.17.78 with QT5.10.1 and Android9.0 are well supported.
Packing connectors (3* 80pin, pitch of 0.5mm) USB 2-ch, USB2.0 OTG
Audio 1-ch Phone, 1-ch MIC, 1-ch Speaker USB Host 2-ch, USB2.0
Ethernet 1-ch, 10/ 100/ 1000Mbps auto-negotiation USB OTG 1-ch, USB2.0
UART 1-ch WIFI& BT 1-ch
Debug 1-ch A53 (RS232), 1-ch M4 (UART) Mini PCIe 1-ch
RS485 1-ch PWM 1-ch
IIC 4-ch JTAG Debug 1-ch
SPI 2-ch PDM 1-ch
QSPI 1-ch, on-board 16MB QSPI NorFlash SAI 1-ch
Camera 1-ch, MIPI-CSI
Single Board Computer OKMX6Q/DL-C
Name: Single board computer
Model: OKMX6Q-C, OKMX6DL-C
CPU: NXP i.MX6Q or i.MX6DL
Architecture: Cortex-A9
RAM: 1GB DDR3 (2GB optional)
Flash: 8GB eMMC
Main Frequency: 1GHz (industrial 800MHz)
OS: Linux4.1.15/ 3.0.35, Android6.0/ 4.4.2
OKMX6Q-C/ OKMX6DL-C is a ready-to-use single board computer consists a 4-layer EINT PCB carrier board and SoM FETMX6Q-C/
FETMX6DL-C, on-board Gigabit Ethernet, CAN bus, parallel camera, WIFI&BT are all available on its carrier board, MIPI, MLB and EMI
bus are all unique features of its CPU. The CPU module was approved by EMC and working temp testing
FLASH 8GB eMMC EIM 32-bit data bus, 27-bit address bus
Working Temp 0℃~ +70℃/ -40℃~ +85℃ SD/ MMC/ SDIO 3-ch
Packing connectors (4* 80pin, pitch of 0.5mm) USB 1x USB2.0 Host, 1x USB2.0 OTG
OKMX6Q/DL is a Cortex-A9 featuring single board computer based on Freescale i.MX6Quad/Dual Lite processor with excellent hardware
and software Performance. On-board connectors for DVP camera, LVDS, HDMI, SD card, CAN, RS485, IrDA, SATA, audio, 3-axis gravity
accelerator, etc are all available and ready-to-use. Both commercial grade 0℃~+70℃ and industrial grade -40℃~+85℃ are optional.
CPU NXP i.MX6DL / i.MX6Quad Display Interface 1x RGB 888, 2x LVDS with 8-bit, 1x HDMI
Main Frequency 1.0GHz (industrial grade 800MHz) Ethernet 1-ch, 10/ 100/ 1000M
Working Temp 0℃~ +70℃/ -40℃~ +85℃ Camera 1-ch, DVP OV5640
Packing Edge soldering (220 pins, pitch of 1mm) USB 1x USB2.0 Host, 1x USB2.0 OTG
UART 4-ch (1 debug port, 2x 3-wire serial, 1x 5-wire Power Supply 1x 5V mandatory power
OKMX6UL-C1 development board/kit is designed based on NXP Cortex-A7 featuring processor i.MX6Ultra Lite and
consists of a compact CPU module with carrier board. OS Linux is well supported. It aims at low power applications
such as telematics, IoT gateway, HMI, home energy management systems, smart energy concentrators, intelligent
industrial control systems, electronics POS device, smart appliances, financial payment systems, etc.
Board-to-board connectors
Packing SPDIF 1-ch
(2* 80 pins, pitch of 0.8mm)
Dimensions 40* 50mm JTAG 1-ch
UART 8-ch
ISO7816-3 2-ch
Certificate: CE/ FCC/ RoHS
OKMX6UL-C1 Carrier Board Features
AUDIO 1x Phone,1x MIC, 2x Speaker JTAG Supported
I2C 2-ch, pinned out PWM 1-ch for LCD backlight
SPI Supported DIP 8
Camera OV9650 (picture preview and take photos) 4G Huawei 909ES module
RTC Supported
Single Board Computer OKMX6UL-C2
Name: Single board computer
Model:OKMX6UL-C2
CPU: i.MX6Ultra Lite
Architecture: Cortex-A7
RAM: 256MB DDR2
Flash: 256MB NAND Flash
Main Frequency: 528MHz
OS: Linux
OKMX6UL-C2 is a compact sized industrial grade carrier board which is available for both FETMX6UL-C1 and
FETMX6UL-C2.
UART 8-ch
ISO7816-3 2-ch
Certificate: CE/ FCC/ RoHS
OKMX6UL-C2 Carrier Board Features
LCD 1-ch, RGB565 PWM 1-ch, backlight
USB Host 1-ch, USB2.0 host ADC 4x-ch, for resistive touch
USB OTG 1-ch, USB 2.0 OTG UART 4-ch, 2x 5-wire, 2x 3-wire
Ethernet 1-ch, 10/100Mbps Ethernet, RJ45 UART Debug 1-ch, DB9 debug port
SD Card 1-ch, SD/SDHC/SDXC(UHS-I) JTAG 1-ch
OK1052-C is a single board computer/ development board designed based on NXP Cortex-M7 crossover processor i.MX
RT1052 belongs to i.MX RT1050 series MCU. It consists of carrier board and SoM.
OK1061-S is a single board computer designed based on NXP Cortex-M7 MCU i.MX RT1061@ 528MHz(commercial grade one 600MHz),
it has on-chip SRAM up to 1MB, 512KB can be flexibly configured as TCM or general purpoes on-chip RAM, and it can support
QSPI-NOR Flash with capability of 4MB.
OK1046A-C is a single board computer(also called development board or demo board) consists of SoM FET1046A-C
and carrier board, and it’s designed based NXP Cortex-A72 featuring quad-core processor LS1046A with frequency up
to 1.7GHz , can support up to 2 10Gb Ethernet or 2 XFI interface and 8 Gigabit Ethernet interface, it has PCIe3.0,
SATA3.0, USB3.0, UART, IIC and other peripherals ready-to-use and supports both Ubuntu and OpenWRT, can support
docker and other virtual technology, with built-in hardware packet accelerator. It is applicable for router, IoT gateway,
edge computing, information security gateway, new type virtual network system, etc.
XFI 1
Up to 10Gbps
MSATA 1 Up to 6Gbps
PCIe X1 2 Up to 5Gbps
USB3.0 2 Up to 5Gbps
UART 4 3x TTL, 1x debug
SD 1 Multiplexed with eMMC
Single Board Computer OK1043A-C
OK1043A-C is a single board computer(also called development board or demo board) consists of SoM FET1043A-C
and carrier board, and it’s designed based NXP Cortex-A53 featuring quad-core processor LS1043A with frequency up
to 1.6GHz has 7 native Ethernet interface(1x 10Gbps and 6x 1000Mbps), it has PCIe2.0, SATA3.0, USB3.0, UART, IIC
and other peripherals ready-to-use and supports both Ubuntu and OpenWRT. It is applicable for router, IoT gateway,
IP-PBX and other similar products, and fields such as edge computing, energy related gateway, smart city, industrial
automation, video surveillance, etc.
OK1012A-C is a single board computer/ development board designed based on NXP Cortex-A53 featuring processor
LS1012A@ 800MHz. It consists of carrier board and SoM and integrates with multiple high-speed peripherals include
gual gigabit Ethernet PHYs with hardware packet acceleration engine, SATA3.0, PCIe2.0, USB3.0, TF card and other
interfaces. It's specially supported with Ubuntu and OpenWRT and aimming at NAS, IoT gatway. broadband Ethernet
gateway and industrial automation markets.
TI AM335x microprocessors is a simple and stable industrial development platform with main frequency up to 800MHz, operating
temperature ranges from -40℃ to +85℃.
Connection method Pin connector EBI 16-bit data bus, 12-bit address bus
Serial 3-ch (2-ch RS232, 1-ch TTL) PWM 1-ch(For LCD backlight)
EBI Support 12 bit address bus,16 bit data bus USB HOST 4-ch, USB 2.0
LCD 1-ch, support resistive, capacitive touch screen; support GPIO More than 20-ch
ADC 8-ch, in which 4-ch for resistive touch, 4-ch for self LVDS Supported
definition by users.
SATA Support to connect with USB to SATA module USB DEVICE 1-ch, USB 2.0
GPS Support to connect with external GPS module Ethernet 1-ch Gigabit Ethernet port
OK335xS single board computer is with dual Ethernet ports which is also based on TI AM335x processor and with industrial grade working
temp. It is with main frequency reaches up to 800MHz, and with 512M DDR3 RAM and 256M Nand flash.
FLASH 256M SLC Nand Flash USB DEVICE 1-ch USB DEVICE 2.0
OS Linux/ Android// WinCE/ Starter Ware PWM 2-ch (1-ch for backlight )
USB DEVICE 1-ch, support USB 2.0 protocol Ethernet 2-ch gigabit Ethernet port
PWM 2-ch(1-ch is for LCD backlight,1-ch is for 3G Support external AD3812 module(USB)
buzzer)
SATA Support to connect with USB to SATA module GPS Support to connect with external GPS module
LCD 1-ch, support resistive, capacitive touch screen; ADC 5-ch (4-ch is for resistive touch, 1-ch is for slide
module
Single Board Computer OK335xS-II
Name: Single board computer
Model: OK335xS-II
CPU: TI AM3354
Architecture: Cortex-A8
RAM: 128M DDR3
Flash: 256M SLC Nand Flash
Main Frequency: 600MHz
OS: Linux, Win CE
Same as other OK335x series single board computer, OK335xS –II is also based on TI Sitara AM335x processor with the advantages of high
efficient processing capacity, with low consumption and highly integrated peripherals, advanced graphic controller and RTC function.
FLASH 256M SLC Nand Flash USB DEVICE 1-ch USB DEVICE 2.0
2D/3D Support 2D/3D graphics acceleration SATA Support USB to SATA module
OK335xS-II Industrial Carrier Board Features
USB DEVICE 1-ch, support USB 2.0 protocol GPIO Many, multiplexed with other pins
LCD 1-ch, support resistive, capacitive touch screen; ADC 7-ch, (2-ch is for self definition, 1-ch is for slide
CAN 2-ch (CAN transceiver is not on the board, only Boot switch Set to boot from Nandflash or SD card
SATA Support to connect with USB to SATA module GPS Support to connect with external GPS module
OK4418-C single board computer is a Cortex-A9 quad-core development kit with main frequency of 1.4GHz, 1G DDR3 and 8G eMMC,
on-board SPI, RS485, CAN, UART, LVDS,HDMI, MIPI, Gigabit Ethernet are all ready-to-use for developers.
S5P4418, Cortex-A9
Architecture Ethernet 1-ch, 10/ 100/ 1000Mbps, auto-negotiation
S5P6818, Cortex-A53
Package Board-to-board connector(4x 80-pin, 0.5mm) USB 1-ch USB2.0 Host, 1-ch USB2.0 OTG
Audio 1-ch phone, 1-ch MIC Mini PCIe 1-ch, USB 3G/ 4G wireless module
Audio 1-ch phone, 1-ch MIC Mini PCIe 1-ch, USB 3G/ 4G wireless module
Parallel Bus 16-bit data bus, 16-bit address bus Li-battery 1-ch
RAM 1GB DDR3L (2GB optional) Camera 2-ch DVP, 4-ch TVIN
OS Linux3.10+ QT5.9, Android7.1 USB 2-ch USB2.0 host, 1-ch USB2.0 OTG
SD/ MMC/ SDIO 2-ch, SD card, 1-ch SDIO SMART Card 1-ch
FCU1101 Features
CR2032, power failure latency at least one year,
CPU NXP i.MX6UltraLite, Cortex-A7, 528MHz RTC
supports NTP
RAM 256M LvDDR3 Encryption IIC, on-board encryption chip, empty soldered
Flash 256M NAND Flash(1GB expandable) Watchdog For reset time setting
TF card For memory expanding, tested up to 32GB LED Power indicator, system status indicator
ZigBee model: WLT2408NZ
GSM 4G: EC20 ZigBee/ LoRa LoRa model: E32-TTL-100, 433MHz
LoRa and ZigBee are optional modules
1-ch, 10/ 100Mbps auto-negotiation,
4-ch, with 1.5KV isolation protection, ESD4,
Ethernet protocol: TCP/ IP, UDP, DHCP, TFTP, FTP, RS485
supported with Modbus(RTU)
Telnet, SSH, Web, HTTP, MQTT
DC12V input, available for DC9V to 36V,
WIFI RL-UM02WBS-8723BU, can support STA, AP Power IN designed with anti-reverse and over-current
protection circuit
Reset 1-ch, for system resetting Dimensions 105mm x 100mm x 33mm
Boot key Boot mode selection: NAND Flash /SD card Mounting Mounting hole with screw
RM: 5% to 95%, non-condensing Linux3.14,
Environment Working temp: -35℃ to +70℃; OS file system: Yaffs2,
Storage temp: -40℃ to +85℃ compiler: arm-fsl-linux-gnueabi-gcc-4.6.2
Embedded Computer FCU1201
Name: Embedded computer
Model: FCU1201
SoM: FETMX6DL-C
Architecture: Cortex-A9
RAM: 1GB DDR3
Flash: 8GB eMMC
Main Frequency: 1GHz
OS: Linux3.0.35
FCU1201 Features
CPU NXP i.MX6DualLite, Cortex-A9, 1GHz HDMI Mini HDMI connector, HDMI v1.4
Status monitored by CPU, super capacitor can
RAM 1GB DDR3 Power Failure
support system running at least 15s in power failure
Flash 8GB eMMC UART 2-ch (1x 3-wire for debug, 1x 3-wire for reader)
TF card For memory expanding, tested up to 64GB RS485 2-ch, with electrical isolation
GSM 4G: ME909S USB 1-ch USB OTG, 1-ch USB Host
ESAM ISO7816, analog by IO CAN 2-ch, with electrical isolation
PSAM With mini SIM card slot Ethernet 1-ch, 10/ 100/ 1000Mbps auto-negotiation
IEEE802.11b/ g/ n 1T1R WLAN
DO 4-ch, with relay isolation WIFI& BT
BT2.1/ 3.0/ 4.0
DI 4-ch, photo coupler isolation RTC CR2032, power failure latency at least one year
DC12V input, available for DC9V to 36V,
1-ch headphone, 1-ch MIC,
Audio Power IN designed with anti-reverse and over-current
preserved with 2-ch for speaker
protection circuit
LVDS DVI-I connector OS Linux3.0.35
Dimensions 147x 103x 42mm Mounting 4x Φ4mm screws