General Product Information
ROCKWOOL stone wool products are made of basalt, a volcanic stone.
ROCKWOOL stone wool products are non-combustible witha ROCKWOOL stone wool is inorganic and contains no
melting point more than 1000°C. They are particularly nutritious substance. Therefore it will not be attacked by
suitable for thermal insulation, fire protection and sound microorganisms. Stone wool will not rot and does not attract,
reduction/absorption, vermin.
No CFCs, HFCs, HCFCs, or asbestos are used in the
manufacture of ROCKWOOL stone wool products.
eo 2.00898ThermalRock B (Blanket)
Common applications Facings
ThermalRack Bis manufactured in a wide variety of thick: ThermalRock B products are available in plain, aluminium
nesses and densities to suit most requirements, suitable for fall acings and one-sided glass tissue facings.
general application in residential, commercial and industrial
builgings. Packaging and storage
Dimensions ThermalRock 8 is supplied in folded or rol form (depending
Product Type Thickness (am) LengihxWidihmm) on factory] and shrink-wrapped in polyethylene sheets for
800 sa 5000x 1200 ease of handling, transportation, storage and identification
50 7500» 1200 Products should be stored indoors or under a waterproof
950 sa 000 x 1200 ae
sa 17500 x 1200
860 50 000 x 1200
sa 7500 x 1200
25 000 x 1200
a0 25 to000 x 1200
so 000 x 1200
so 17500 x 1200
25 000% 1200
3100 25 ‘000 17200
so 2500 x 1200
sa 40005 1200
‘Note: Please contact your local representatives forthe specific
densities and thicknesses that are avaiable locally
Technical Parameters
Product Types BaD B50 Ba Ba Bio
[Nominal Density kg/m? o 50 6 80 100)
Thermal Conductivity (Wirnk)}* 0.038 0035 00k nose 0.035
‘Sound Absorption Please contact your local representative for more information|
Fire Performance Non-cambustible/ Euro Class At (without facing)
Water Vapour Absorption Moisture Resistance) < 1,04 %, by valume
Water Absorption Partial Immersion) 10 kg/m?
* Thermal canductivity is tested at mean temperature of 20C in accordance with ASTM C518 by external
accredited laboratory. t's recommended to have a safety factor of 20% 2s design value.
Standard
ASTM C518
150.384
EN 13501-1
ASTM c1t04/c1106M
EN 1609