Professional Documents
Culture Documents
DATA SHEET
System Fastener for interior finishing,
building construction, mechanical
and electrical application
May 2020
BX 3 system
[0.118"]
[0.118"]
X-C 20/24/27/30 B3 MX Ø3
Ø3
[0.236"]
[0.236"]
X-C: o 6.5
X-P: o 6.8
Ø6
Ø6
M6
M6
o 6.8
o3 o3
1.5 1.5
1.8 Ls [0.059"] [0.059"]
1.8 14 7 24 7 14
L [0.276"] [0.944"] [0.276"] [0.551"]
15.8
X-C 36 B3 MX X-W6-12-20 B3 P7 X-W6-12-14 B3 P7
[0.118"]
[0.118"]
Ø3
Ø3
W6
W6
Ø 6.3
[0.236"]
[0.236"]
Ø 2.75
Ø6
Ø6
1.8 36
37.8
1.5 1.5
[0.059"] [0.059"]
12 20 12 14
[0.472"] [0.787"] [0.472"] [0.551"]
General information
Material specifications
X-P B3 MX/P7, X-S B3 MX Carbon steel, HRC 57.5, 2-13 μm zinc coating
X-C B3 MX Carbon steel, HRC 56.5, 2-13 μm zinc coating
205/2020
www.hilti.group
BX 3 system
X-ECC MX X-EHS MX
X-ECH MX X-DFB MX X-EKB
8 MX
3
X-ECT 40 MX
X-ET MX X-TT
w x l x h = 16.5 x 16.5 x 12 mm
General information
Material specifications
X-ECT MX, X-EKS, X-EKSC MX, ECH MX PA, halogen free, silicone free, light grey RAL 7035
X-EKB MX PA, halogen free, light grey RAL 7035
X-ECT-FR MX PBT, silicone free, flame retardant, stone grey RAL 7030
X-EKB-FR MX PBT, silicone free, flame retardant, stone grey RAL 7030
X-UCT MX, X-ET MX HDPE, halogen free, silicone free, light grey RAL 7035
X-TT PET
X-FB MX, X-DFB MX Galvanized steel sheet, fu = 270-420 N/mm², 10–20 µm zinc coating
X-ECC MX, X-EHS MX Galvanized steel sheet, fu = 270-420 N/mm², 10–20 µm zinc coating
Approvals
ICC-ESR 1752 (USA)
ETA-16/0301 X-P 20 B3 MX, X-P 24 B3 MX, various electrical elements (see ETA
approval Annex A1)
Applications
With nails
Drywall tracks to concrete and Fastening wood, e.g. Placopan®, Junction boxes, switch boxes, etc
steel to concrete
Flexible or rigid cable conduits Fastening cables Cable conduits or light-duty pipes
with cable ties
05/2020 www.hilti.group 3
BX 3 system
Performance data
Nrec Vrec
Conditions:
• For safety relevant fastenings sufficient redundancy of the entire system is required;
Minimum of 5 nails per fastened track. All visible setting failures must be replaced
• Sheet metal failure is not considered in recommended loads and must be assessed separately
• Soft concrete up to fc,cube = 45 N/mm2 (C35/45), some tough concrete up to
fc,cube = 60 N/mm2 (C50/60).
• Concrete with aggregate like granite or river rock or softer, and up to 16 mm diameter
• The stick rate indicates the percentage of nails that were driven correctly to carry a load.
Stick rate can vary from the above values depending on job site conditions.
405/2020
www.hilti.group
BX 3 system
Performance data
Conditions:
• Spacing ≤ 100 mm
• All visible failures must be replaced
05/2020 www.hilti.group 5
BX 3 system
Nail recommendation
For concrete base material
Length Shank Ø Hardness Coating
Nail types Tip Material
[mm] [mm] [HRC] [μm]
X-P B3 Long Carbon Zinc,
17-36 3.0 57.5
P7/MX conical steel 2-10
• Premium nails (as listed above) are recommended for use on soft and some tough
concrete. For more details regarding nail classification and concrete types, please
refer to Concrete Fastener Selection section in Hilti Direct Fastening Technology
Manual (DFTM)
• X-P 17/20/24 B3 MX to be used with BX 3 02, BX 3-L 02, BX 3-ME (02) and BX 3-IF
• X-P 30/36 B3 P7 to be used with BX 3-ME (02) and BX 3-IF
605/2020
www.hilti.group
BX 3 system
Application requirements
Thickness of base material
Concrete (for nails Steel
70
and threaded studs) tII ≥ 4.0 mm (for nails)
hmin
tII
dnom
Metal track: tI ≤ 2 mm
Deflection head: tI.tot. ≤ 21 mm (gypsum strip +
≤19
80 40 80 40
40
80
≥15
≥ 4.5 dnom
05/2020 www.hilti.group 7
BX 3 system
Application limits
X-S 14 B3 MX X-M6-7-14 B3 P7, X-W6-12-14 B3 P7
20 20
18 18
16
Steel thickness, tII [mm]
Corrosion information
The intended use only comprises fastenings which are not directly exposed to external
weather conditions or moist atmospheres, i.e. only intended for dry indoor areas.
2156218,
of base material
X-P 24 B3 MX 24 3
2156391 Concrete
X-P 30 B3 P7 2105406 30 3 / Sand-lime
X-P 36 B3 P7 2105407 36 3 masonry
X-C 20 B3 MX 2123993 20 3
X-C 24 B3 MX 2123994 24 3
X-C 27 B3 MX 2224568 27 3
X-C 30 B3 MX 2149988 30 3
X-C 36 B3 MX 2149989 36 2.75
805/2020
www.hilti.group
BX 3 system
Threaded studs
Threaded studs Item no. Thread Thread Shank Shank Base material
size length length diameter
(mm) (mm) (mm)
X-M6-7-14 B3 P7 2105408 M6 7 14 3 Steel
X-M6-7-24 B3 P7 2105409 M6 7 24 3 Concrete
X-W6-12-14 B3 P7 2105800 W6 12 14 3 Steel
X-W6-12-20 B3 P7 2105801 W6 12 20 3 Concrete
Fastener selection
X-C 20 B3 MX X-C 20 B3 MX
X-C 24 B3 MX X-S 14 B3 MX
X-C 24 B3 MX X-P 17 B3 MX
X-C 24 B3 MX
X-P 20 B3 MX X-S 14 B3 MX
X-C 20 B3 MX
X-P 20 B3 MX
-------- X-P 17 B3 MX X-S 14 B3 MX
X-P 17 B3 MX
X-C 24 B3 MX
-------- -------- X-S 14 B3 MX
X-C 20 B3 MX
X-W6-12-20 B3 P7 X-W6-12-14 B3 P7
X-M6-7-24 B3 P7 X-M6-7-14 B3 P7
Propellant-free
Propellant-free
For more details and information, please contact your nearest Hilti representative.
05/2020 www.hilti.group 9
BX 3 system
Fastener selection
1DLO6HOHFWRUIRU
%;DQG%;/
;&%0; ;&%0;
;&%0;
;6%0;
;&%0; ;3%0;
;&%0;
;3%0; ;6%0;
;&%0;
;3%0;
;3%0; ;6%0;
;3%0;
;&%0;
;6%0;
;&%0;
Fastener Guides
BX 3 02
* X-C 36 B3 MX suitable for BX 3-L 02 only
2192780 A1-07.2017
1 1
X-FG B3-IF 02 X-FG B3-ME
# 2179275 # 2101258
1 2
2
X-FG B3-ME 02 X-WH B3
# 2101256
# 2179276
2 2
X-FG B3-WH 02 X-FG B3-FE
3 BX 3-ME (02)
BX 3 02 BX 3-IF
# 2179277 BX 3-L 02 2 # 2208570 2
# 2179350 1 # 2208489
X-FG B3-PH 02 3
X-FG B3-IF
3
BX 3 02
BX 3-ME (02) BX 3-L 02
# 2179278 BX 3-IF BX 3-BT 02
# 2116415
X-FG B3-PHD 02
X-WHC B3
# 2179279
# 2149225
1005/2020
www.hilti.group
BX 3 system
hNVS
hNVS
tI
hNVS
tI
tI
1
≤19
≤1
hNVS
05/2020 www.hilti.group 11