Professional Documents
Culture Documents
Installation Diagram
SOLENOID
CHECK VALVE
1/2” UP TO 621 BAR 9,000 PSI INLET 27.9mm A/F 73.4mm
METERING
[1.10in] 2.89in
STOP
AND
The C50 is a 1/2” nominal bore
check valve. It will allow flow
in one direction, and blocks
flow in the opposite direction.
DIRECTIONAL
CONTROL
It may also be referred to as a
3 PORT
non-return valve.
DIRECTIONAL
gases.
CONTROL
4 PORT
l Check or Non-Return valve
l Stainless steel construction
l Sealed poppet design
l Virtually zero leakage
SHUTTLE
l Cost effective one piece body design
CHECK
AND
l Can be used subsea
l Suitable for liquid or gas
l Suitable for use with air, nitrogen, sweet natural gas, INLET OUTLET
mineral oils, water glycols and plain water OUTLET
OPERATED
l
CHECK
Various seal options available
PILOT
l Various porting options available
RELIEF
SECTION E-E
Externally Exposed Parts: 316 stainless steel.
C50 P - NBR - 9K
BASIC MODEL
NUMBER C50 Internally Wetted Parts: 316 and 302 stainless steel and acetal.
EXCESS
FLOW
The standard valve is designed for use with air, nitrogen, sweet MAX
natural gas, mineral oil, water glycols and plain water and may VALVE PORTING SEAL WORKING
also be used with a wide variety of media compatible with the
INLET OUTLET materials of construction. TYPE OPTIONS OPTIONS PRESSURE
SYMBOL
Leave blank for Viton® seals
-10˚C to +120˚C
The standard valve has Viton® seals. Further seal options are
FILTERS
MAX WORKING 621 bar ! available via the Product Selector. Compatibility with the C50 P NBR 9K
working fluid at the operating temperature must be considered. 1/2” BSPP female Nitrile seals 621 bar
PRESSURE (LIQUID) (9,000 psi)
(9,000 psi)
-30˚C to +105˚C
MAX WORKING 241 bar Typical Performance N EP
Liquid
PRESSURE (GAS) (3,500 psi) 1/2” NPT female EPDM seals 241 bar
PRESSURE
SENSING
-45˚C to +120˚C (3,500 psi)
Pressure Drop vs. Flow
CV (FLOW CAPACITY) 2.2 Gas
20
(290) KLZ
Kalrez® seals
Liquids and Gases -25˚C to +120˚C
FLUID 15
Pressure Drop - bar (psi)
PUMPS
See Product Selector opposite Hydrogenated
TEMPERATURE RANGE and Technical Data section 10
(145) Nitrile seals
Repair and seal kits are available -20˚C to +120˚C
on request
PORT SIZE 1/2” 5 Further seal options are available
(73) For a seal kit add SK at the end of the on request
ACTUATORS
model code and for a repair kit add RK
0.1 - 0.3 bar
CRACKING PRESSURE (2 - 5 psi) 0
0 25 50 75 100 125 150
(6.6) (13.2) (19.8) (26.4) (33.0) (39.6)
0.3 kg
WEIGHT (0.7 lb) Flow - l/min (USgpm)
TECHNICAL
Specifications may change without notice
Typical performance based on water
Catalogue also available on digital media
DATA
Visit our website for a full online search facility VALVES
VALVES 10/14 www.bisvalves.co.uk The Specifier’s Catalogue Page 7