Professional Documents
Culture Documents
1. Connect the HDS to the data link connector (DLC) (A) located
under the driver's side of the dashboard.
3. Make sure the HDS communicates with the vehicle. If it does not
communicate, go to the DLC circuit troubleshooting.
https://www.motologic.com/car/2014_accord/article/c6dba0b9e62d151b67d0ebe5a036750e 1/2
7/5/22, 6:52 PM VSA Sensor Neutral Position Memorization • 2014 Honda Accord • MotoLogic
1. Park the vehicle on a flat and level surface, with the steering wheel in the straight ahead position.
2. Select VSA ADJUSTMENT, then select ALL SENSORS with the HDS, and follow the screen prompts.
4. TPMS - Calibration
https://www.motologic.com/car/2014_accord/article/c6dba0b9e62d151b67d0ebe5a036750e 2/2