EAR all Ceara
Start Complete Exam Preparation
ry or aa ema
MasterClasses Creston BY iier
. oo Li
| :
Question
In R.C.C. roof, straight bar length of hook taken as (where D is the diameter of the bar)-
his questi viou
UPSSSC JE Civil 2016 Official Paper 2 [___scaror |
1. 6D
2. 8D
3. 9D
4. None of these
rrorToal its}
India's Super Teachers for all govt. exams
LU Tela @ ala CololgAnswer (Detailed Solution Below)
Option 3:9 D
Detailed Solution
Concept:
Bends and Hooks Forming End Anchorages (As per IS 2502:1963 )
Here
k = 2 for Mild Steel
k = 3 for Medium Tensile Steel
k = 4 for Cold-worked Steel
As per IS 2502:1963, P-6, Tables
H = Hook allowance taken as 9d, 11d, 13d, and 17d fork values 2, 3, 4 and 6 respectively and rounded
offto the nearest 5 mm, but not less than 75 mm.
B = Bend allowance is taken as 5d, 5.5d, 6d, and 7d for k values 2, 3, 4 and 6 respectively and rounded
off to the nearest 5 mm, but not less than 75 mm.
-. Extra length for one hook = 9d